锻压技术

薄壁钢筒温挤件背压式冷精整技术

英文标题：Backpressure cold finishing technology for warm extrusion thin-walled steel cylinder part

作者：李超许桢英杨夏明张太良王匀

分类号：TG376.1

出版年,卷(期):页码：2016,41(10):82-87

摘要：

针对薄壁钢筒温挤件在冷精整过程中出现的内腔顶部凸起现象，应用速度场、应力场和点追踪法分析了薄壁钢筒温挤件的成形过程和缺陷形成的原因。在精整过程的初始阶段，顶部变形区上部金属所受应力小于下部金属所受应力，金属有向上流动的趋势，由于摩擦力的作用，周边层金属的流动滞后于中心层金属，因此，随着上模的向下移动，内腔顶部逐渐向上凸起。根据挤压件顶部受力分析，提出了背压式冷精整技术，通过对工件顶部施加反向压力，实现了对工件顶部材料流动的再控制，即抑制金属的向上流动。基于塑性力学理论分析了新技术的可行性，通过数值模拟优化了背压力，结果表明：两次精整的背压力分别为3460和7450 N时最为合适。在自主研发的背压式精整装置上，进行了实验验证，发现完全可以消除顶部缺陷，从而达到改善顶部缺陷的目的。

For the inner cavity bulges on the top of warm extrusion thin-walled steel cylinder part, the whole forming process and the causes of product defects were analyzed by velocity field, stress field and point tracking methods. In the beginning of the cold finishing process, the stress of upper metal on the top of deformation zone is less than that of the bottom, so the metal has a trendency to flow upward. Besides, the surrounding metal moves slowly than the central metal due to friction, with the downward movement of the top die, bulges emerges at the inner cavity. The backpressure cold finishing technology was put forward by analyzing the force from the top of extrusion part. And the material flow on the top of workpiece was controlled again by the pressure from the top of workpiece to restrain material from flowing upwards. Furthermore, the feasibility of the new technology was analyzed based on theories of plastic mechanics, and the backward force was optimized by numerical simulation. The result shows that the appropriate backward forces of two cold finishing processes are 3460 N and 7500 N respectively. The experiment was done on the self-developed backpressure cold finishing molding machine. The results show that the defects can be completely eliminated.

基金项目：

江苏省科技成果转化专项资金项目(SBA2014 030056)；江苏省科技支撑计划项目(BE2013009-1)；“青蓝工程”学术带头人（苏教师（2014）23号）

作者简介：李超（1992-），男，硕士研究生 E-mail：394708557@qq.com；通讯作者：王匀（1975-），男，博士，教授 E-mail：wangyun@ujs.edu.cn

参考文献：

[1]安静，曹阳根，杨尚磊，等. 汽车蓄能器储压管成形过程的数值模拟[J]. 锻压技术，2014，39(9)：1-5.

An J, Cao Y G, Yang S L，et al. Numerical simulation of forming process for pressure accumulating tube in automobile accumulator [J]. Forging & Stamping Technology, 2014，39(9)：1-5.

[2]Li Q, Jiang Z, Ma X H, et al. Research on warm-cold precision forging process and numerical simulation for spherical housing [J]. Advanced Materials Research, 2011, 189(193): 2780-2783.

[3]龚爱军，袁海兵，李明明，等. 三销滑套冷精整模具改进及模拟分析[J]. 模具技术，2015，17(1)：4-7.

Gong A J, Yuan H B, Li M M，et al. Improved tool design and numerical simulation on cold ironing process of tulip plunging outer race [J]. Die and Mould Technology, 2015，17(1)：4-7.

[4]江苏太平洋精锻科技股份有限公司,江苏太平洋齿轮传动有限公司.带棘齿的凸轮环冷精整模具[P]. 中国:CN201320598604.1，2014-04-09.

Jiangsu Pacific Precision Forging Co., Ltd., Jiangsu Pacific Gear Transmission Co., Ltd. The cam ring belt of cold finishing mould[P]. China: CN01320598604.1,2014-04-09.

[5]重庆创精温锻成型有限公司.汽车变速箱倒空档齿轮齿形导入角冷精整模具[P]. 中国:CN201120203684.7,2012-01-18.

Chongqing Chuangjing Warm Forging Forming Co., Ltd. Cold finishing mould for reverse gap gear tooth profile pour angle of gearbox[P]. China：CN201120203684.7,2012-01-18.

[6]朱怀沈，夏巨谌，金俊松，等. 大模数直齿轮温冷锻精整量的优化选择[J]. 塑性工程学报，2011，18(1)：53-57.

Zhu H S, Xia J C, Jin J S，et al. Optimization of sizing amount during warm-cold compound forging for spur gear with big modulus [J]. Journal of Plasticity Engineering, 2011，18(1)：53-57.

[7]文琍，李琳. 汽车离合器盘毂冷精整工艺数值模拟与实验研究[J]. 锻压技术，2015，40(7)：57-61.

Wen L, Li L. Study on simulation and experiment of cold sizing process for automobile clutch disk-hub [J]. Forging & Stamping Technology, 2015，40(7)：57-61.

[8]李君. 复杂壳体类零件流动控制成形工艺数值模拟及实验研究[D]. 合肥：合肥工业大学,2014.

Li J. Numerical Simulation and Experimental Study on FCF of Complex Structure Parts[D]. Hefei：Hefei University of Technology,2014.

[9]李君，董飞，薛克敏，等. 雷达波导件背压挤压成形工艺研究及模具设计[J]. 模具技术，2013，15(5)：1-4.

Li J, Dong F, Xue K M，et al. Back pressure extrusion process research and die design of radar waveguide [J]. Die and Mould Technology, 2013，15(5)：1-4.

[10]李君，薛克敏，孙艮芝，等. 雷达波导件精密挤压成形工艺[J]. 塑性工程学报，2013，20(4)：1-5.

Li J, Xue K M, Sun G Z，et al. Precision extrusion process of waveguide component for radar use [J]. Journal of Plasticity Engineering, 2013，20(4)：1-5.

[11]Yang C, Zhao S. Precision forging of spur gear by flow control forming method [J]. Australian Journal of Mechanical Engineering, 2014，12(1): 33-39.

[12]Behrens B A, Doege E. Cold sizing of cold and hot-formed gears [J]. CIRP Annals-Manufacturing Technology, 2004,53(1): 239-242.

[13]Yuan A. Cold extrusion of a long trapezium spline and its forming analysis [J]. International Journal of Advanced Manufacturing Technology, 2009, 41(5): 461-467.

[14]Dean T A. The net-shape forming of gears [J]. Materials & Design, 2000, 21(4): 271-278.

[15]Feng W, Hua L, Han X H. Finite element analysis and simulation for cold precision forging of a helical gear [J]. Journal of Central South University, 2012, 19(12): 3369-3377.

[16]运新兵. 金属塑性成形原理[M]. 北京：冶金工业出版社, 2012.

Yun X B. Plastic Forming Mechanism[M]. Beijing：Metallurgical Industry Press，2012.

[17]俞汉清, 陈金德. 金属塑性成形原理[M]. 北京：机械工业出版社, 2005.

Yu H Q，Chen J D. Plastic Forming Mechanism[M]. Beijing：China Machine Press，2005.

[18]洪慎章. 冷挤压实用技术[M]. 北京:机械工业出版社, 2014.

Hong S Z. Cold Extrusion Technology[M]. Beijing：China Machine Press，2014.

服务与反馈：

【文章下载】【加入收藏】