锻压技术

工具转速对AZ31B 镁合金圆锥盒摩擦热渐进成形板料温度及成形能力的影响

英文标题：Influence of tool speed on sheet temperature and formability of magnesium alloy AZ31B cone box in frictional heat incremental forming

作者：周六如郑志强罗忠民

单位：南昌大学

关键词：渐进成形板料成形工具转速摩擦热镁合金成形性能

分类号：TG381

出版年,卷(期):页码：2016,41(9):31-34

摘要：

针对镁合金室温下成形性能差的缺点，为了提高其成形性能，采用不需要外部加热而依靠自身摩擦热进行

的镁合金摩擦热渐进成形进行研究，介绍了镁合金圆锥盒摩擦热渐进成形的基本原理、工艺路径设计以及

成形过程分析。制定了2 mm厚AZ31B 镁合金板料成形锥角45°和高度60 mm的圆锥盒形件的工艺方案，选择

工具旋转速度为0～6000 r·min-1、进给速度为1000～2000 mm·min-1，设计成形工具的运动轨迹之后进行

渐进成形工艺实验。实验结果表明，成形高度和进给速度等因素对成形性能的影响较小，而工具转速对成形

性能影响较大，转速越高（0～6000 r·min-1）则板料与工具摩擦产生的温度就越高。当转速在0～1000 r

·min-1或≧1500 r·min-1时，成形不能进行，转速在1000 r·min-1≤ω≤1500 r·min-1时，成形可以顺

利进行。因此可以通过控制工具转速所产生的摩擦热有效提高板料的成形性能。

For the poor formability of magnesium alloys at room temperature, it was studied the

frictional heat incremental forming method for magnesium allog sheets from self frictional

heat instead of external heating to improve forming performance. The forming principle,

process plans and forming process were introduced, and the process plan was designed that a

circular conical cup magnesium alloy AZ31B with 2 mm thickness was formed with 45°

inclination angle and 60 mm height. Furthermore, the forming trajectory was designed, and then

incremental forming experiments were done by choosing tool rotational speeds 0-6000 r·min-1

and feed rates 1000-2000 mm·min-1. Experiment results show that forming height and feed rate

have little effect on forming performance, and the tool rotation speed has great influence on

the forming performance, thus, the faster the tool rotation speed is, the higher the

temperature is. But the forming is failed when the tool rotation speed is 0-1000 r·min-1 or

≧1500 r·min-1，while the forming is successful at 1000 r·min-1 ≤ω≤1500 r·min-1. The

forming performance is enhanced by frictional heat from tool rotation speed.

基金项目：

国家自然科学基金资助项目（51465038）

周六如（1963－），男，博士，副教授

参考文献：

［1］ Jeswiet J, Micari F, Hirt G, et al. Asymmetric single point incremental forming of sheet metal[J]. CIRP Ann.,2005, 54(2):88-114.

［2］ Iseki H, Naganawa T. Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers[J]. Journal of

Materials Processing Technology,2002,130,657-662.

［3］ Hagan E, Jeswiet J. Analysis of surface roughness for parts formed by CNC incremental forming[J]. Journal of Engineering Manufacture,2004, 10: 1307-1312.

［4］ Zhang Q, Xiaoa F, Guoa H, et al. Warm negative incremental forming of magnesium alloy AZ31 sheet: New lubricating method[J]. Journal of Materials Processing Technology,2010,210, 323-329.

［5］ Duflou J R, Callebaut B, Verbert J, et al. Laser assisted incremental forming: Formability and accuracy improvement[J].CIRP Ann.,2007, 56(1): 273-276.

［6］ Duflou J R, Callebaut B, Verbert J, et al. Improved SPIF performance through dynamic local heating[J]. International Journal of Machine Tools & Manufacture,2008, 48(5):543-549.

［7］ Ambrogio G, Filice L, Manco G L. Warm incremental forming of magnesium alloy AZ31[J]. CIRP Ann.,2008, 57(1):257-260.

［8］ Salandro W A, Jones J J, Mcneal T A, et al. Formability of Al 5xxx sheet metals using pulsed current for various heat treatments[J]. Journal of Manufacturing Science and Engineering,2010, 132(5):1-11.

［9］ Hino R, Yoshida F, Nagaishi N, et al. Incremental sheet forming with local heating for lightweight hard-to-form material[J]. International Journal of Modern Physics B,2008, 22(31-32):6082-6087.

［10］范国强，高霖，刘鹏，等. TC4板料电辅助加热数控渐进成形工艺分析及优化[J]. 南京航空航天大学学报,2010,(4): 238-243.

Fan G Q, Gao L, Liu P, et al. Technology analysis and optimization for electric hot incremental forming of Ti-6Al-4V sheet[J]. Journal of Nanjing University of Aeronautics & Astronautics,2010, 42(2):238-243.

［11］Taleb Araghi B, Gttmann A, Bergweiler G, et al. Investigation on incremental sheet forming combined with laser heating and stretch forming for the production of lightweight structures[J]. Key Engineering Materials,2011, 473:919-928.

［12］Durante M, Formisano A, Langella A, et al. The influence of tool rotation on an incremental forming process[J]. Journal of Materials Processing Technology,2009, 209:4621-4626.

［13］Hamilton K, Jeswiet J. Single poin incremental forming at high feed rates and rotational speeds: Surface and structural consequences[J]. CIRP Ann.,2010, 59(1):311-314.

［14］Otsu M, Matsuo H, Matsuda M, et al. Friction stir incremental forming of aluminum alloy sheets[J]. Steel Research International,2010, 81(9):942-945.

服务与反馈：

【文章下载】【加入收藏】