锻压技术

多点渐进成形工艺数值模拟及实验对比

英文标题：Numerical simulation and experimental validation of multipoint incremental forming technology

作者：刘志芳罗远新

单位：重庆理工大学重庆大学

分类号：TG386

出版年,卷(期):页码：2017,42(3):96-102

摘要：

针对成形大尺寸船板需要大设备的问题，以多点渐进成形方法为研究对象，该方法既有单点渐进成形的由局部变形累计成总体变形的特点，又有多点成形模具自由重构的特点。采用数值模拟法仿真了4种不同的成形工艺产生的成形效果，同时展开了相同工况的实验研究，将实验结果在三维扫描仪下进行测量，然后对比验证了数值模拟的仿真结果。研究结果表明：对于双曲率船板而言，两侧多点同步驱动的成形方案比一侧先调整好位置、另外一侧再依次驱动的方案要优越，成形路径对成形效果的影响不太明显，压头的驱动方式对成形力的历史变化影响显著。

The large plate requires to be formed by large size forming equipment, and the multipoint forming has the characteristics of both accumulated forming effect from the single point incremental forming and free reconstruction of multipoint forming die. Then, the forming effects were simulated numerically by four different forming technologies, and the experimental researches were carried out. Furthermore, the experimental results were scanned by a 3D laser scanner and compared with simulated results. The results indicate that the forming method by moving both side pins together is better than that by first adjusting one side pin position and then moving it for a doublecurvature plate. The influence of the forming path on the forming effect is unobvious, but the gradual changes of forming force are greatly affected by the driving model of pins.

基金项目：

重庆市教委科学技术研究项目（KJ1600941）

刘志芳(1984-) ，男，博士，讲师

参考文献：

［1］Thibaud S, Hmida R B, Richard F, et al. A fully parametric toolbox for the simulation of single point incremental sheet forming process: Numerical feasibility and experimental validation[J]. Simulation Modelling Practice & Theory, 2012, 29:32-43.
［2］Malhotra R, Bhattacharya A, Kumar A, et al. A new methodology for multipass single point incremental forming with mixed toolpaths[J]. CIRP Annals  Manufacturing Technology, 2011, 60(1):323-326.
［3］Bagudanch I, GarciaRomeu M L, Centeno G, et al. Forming force and temperature effects on single point incremental forming of polyvinylchloride[J]. Journal of Materials Processing Technology, 2015, 219:221-229.
［4］Raju C, Narayanan C S. Application of a hybrid optimization technique in a multiple sheet single point incremental forming process[J]. Measurement, 2015, 78:296-308.
［5］Liang J C, Gao S, Teng F, et al. Flexible 3D stretchbending technology for aluminum profile[J]. The International Journal of Advanced Manufacturing Technology, 2014, 71(9):1939-1947.
［6］Cai Z Y, Wang S H, Xu X D, et al. Numerical simulation for the multipoint stretch forming process of sheet metal[J]. Journal of Materials Processing Technology, 2009, 209(1):396-407.
［7］Wang Y, Li M Z. Research on three-dimensional surface parts in multigripper flexible stretch forming[J]. The International Journal of Advanced Manufacturing Technology, 2014, 71(9):1701-1707.
［8］Yoon J S, Son S E, Song W J, et al. Study on flexiblyreconfigurable roll forming process for multicurved surface of sheet metal[J]. International Journal of Precision Engineering and Manufacturing, 2014, 15(6):1069-1074.
［9］Wang D, Li M, Cai Z. Continuousforming method for threedimensional surface parts combining rolling process with multipointforming technology[J]. The International Journal of Advanced Manufacturing Technology, 2014, 72(1):201-207.
［10］Wang D, Li M, Cai Z. Research on forming precision of flexible rolling method for threedimensional surface parts through simulation[J]. The International Journal of Advanced Manufacturing Technology, 2014, 71(9):1717-1727.
［11］Wang D, Li M, Wang Y, et al. Investigation and improvement of 3D rolling process for 3D surface parts[J]. The International Journal of Advanced Manufacturing Technology, 2015, 78(1):407-417.
［12］Zhang Q, Dean T A, Wang Z R. Numerical simulation of deformation in multipoint sandwich forming[J]. International Journal of Machine Tools & Manufacture, 2006, 46(7-8):699-707.
［13］Zhang Q, Wang Z R, Dean T A. The mechanics of multipoint sandwich forming[J]. International Journal of Machine Tools & Manufacture, 2008, 48(12):1495-1503.
［14］Tan F X, Li M Z, Cai Z Y. Research on the process of multipoint forming for the customized titanium alloy cranial prosthesis[J]. Journal of Materials Processing Technology, 2007, 187-188(4):453-457.
［15］Liu Q, Cheng L, Fu W, et al. Optimization of cushion conditions in micro multipoint sheet forming[J]. Journal of Materials Processing Technology, 2012, 212(3):672-677.
［16］Hwang S Y, Lee J H, Yang Y S, et al. Springback adjustment for multipoint forming of thick plates in shipbuilding[J]. ComputerAided Design, 2010, 42(11):1001-1012.
［17］Zhang Q F, Cai Z Y, Zhang Y, et al. Springback compensation method for doubly curved plate in multipoint forming[J]. Materials & Design, 2013, 47(9):377-385.
［18］Luo Y, Yang W, Liu Z, et al. Numerical simulation and experimental study on cyclic multipoint incremental forming process[J]. The International Journal of Advanced Manufacturing Technology, 2016, 85(5):1249-1259.

服务与反馈：

【文章下载】【加入收藏】