锻压技术

辊缝油膜承载力对冷轧机振动的影响

英文标题：Influence of oil film bearing capacity of roll gap on vibration of cold rolling mill

作者：梁胜龙

单位：苏州工业职业技术学院

分类号：TG333

出版年,卷(期):页码：2017,42(3):119-122

摘要：

针对某冷轧厂在线轧制过程中轧机的振动问题，从辊缝油膜承载力的角度分析其对轧机振动的影响，得出轧制过程中辊缝间距的减小导致辊缝油膜需提供更大的承载力来维持轧机稳定。从乳化液浓度、轧辊转速、乳化液金属微粒含量方面探讨了增强辊缝油膜承载力的方法，得出乳化液浓度与轧辊转速在增强油膜承载力的同时减小了辊缝的摩擦系数，也易导致轧机振动。通过试验得出，调节乳化液金属微粒含量能够在原有摩擦系数的基础上增强辊缝油膜承载力，从而保证轧机的稳定运行。

For vibration problems in the production of cold rolling mill of a rolling company, its influence on the vibration of cold rolling mill was analyzed based on the oil film bearing capacity of roll gap. It is found that the reduction of roll gap spacing causes a greater bearing capacity from oil film of roll gap to maintain the stability of rolling mill. Therefore, the method of increasing oil film bearing capacity of roll gap was discussed by emulsion concentration, roll speed, metal particles content of emulsion. The results show that the emulsion concentration and roll speed can enhance oil film bearing capacity and reduce friction coefficient of roll gap at the same time, while it also causes mill vibration. At last, adjusting metal particles content of emulsion can enhance oil film bearing capacity in the situation of constant friction coefficient through experiment to ensure stable operation of rolling mill.

基金项目：

江苏高校品牌专业建设工程资助项目（PPZY2015B186）

梁胜龙（1963-），男，学士，副教授

参考文献：

［1］邹家祥.冷连轧机系统振动控制[M].北京：冶金工业出版社，1998.Zou J X.Tandem Mill Vibration Control [M].Beijing：Metallurgical Industry Press,1998.
［2］Huart S, Dubar M, Deltombe R, et al. Asperity deformation, lubricant trapping and iron fines formation mechanism in cold rolling processes [J].Wear, 2004，257 (5)：471-480.
［3］段吉安，钟掘.高速轧机工作界面的负阻尼特性[J].中南工业大学学报，2002，33(4)：401-404.Duan J A，Zhong J.Negative damping of rolling interface for rolling chatter[J].Journal of Central South University，2002，33(4)：401-404.
［4］王军生，白金兰，刘相华,等.带钢冷连轧原理与过程控制[M].北京：科学出版社，2009.Wang J S, Bai J L, Liu X H, et al. Principle and Process Control of Cold Strip Rolling[M]. Beijing: Science Press, 2009.
［5］圣洁.冷轧过程中乳化液润滑性能数值仿真分析[D].上海：华东理工大学，2011.Sheng J.Simulation of Emulsion on Lubrication Properties in ColdRolling[D]. Shanghai: East China University of Science and Technology，2011.
［6］孙志辉，邹家祥.轧制润滑摩擦对轧机振动的影响[J].重型机械，1998，(6)：27-29.Sun Z H，Zou J X.Influence of rolling lubrication friction on vibration of rolling mill [J]. Heavy Machinery，1998，(6)：27-29.
［7］董宏.冷连轧机轧制过程中轧辊振动的研究[D].沈阳：东北大学，2006.Dong H. Study of Roller Vibration in Rolling Processes of Cold Tandem Rolling[D]. Shenyang: Northeastern University，2006.
［8］吴炳胜，张一川.辊缝摩擦系数对冷轧机振动的影响[J].锻压技术，2015，40(10)：92-95.Wu B S，Zhang Y C.Influence of friction coefficient of roll gap on the vibration of cold rolling mill[J].Forging & Stamping Technology，2015，40(10)：92-95.
［9］朱润生，李娜，温诗铸.电场对摩擦系数的影响的研究进展[J].润滑与密封，1998，23(5)：53-56.Zhu R S，Li N，Wen S Z.Research progress of influence of electric field on friction coefficient [J].Lubrication Engineering，1998，23(5)：53-56.

服务与反馈：

【文章下载】【加入收藏】