[1]李建雄,方一鸣,石胜利. 轧机液压伺服位置系统的自适应输出反馈控制[J]. 电机与控制学报,2012,16(1):104-110.
Li J X,Fang Y M,Shi S L. Adaptive output-feedback control for hydraulic servo position system of rolling mill[J]. Electical Machines and Control,2012,16(1):104-110.
[2]Chalupa P, Novák J. Modeling and model predictive control of a nonlinear hydraulic system[J]. Computers & Mathematics with Applications,2013,66(2):155-164.
[3]王传礼,丁凡,李其朋,等. 对称四通阀控非对称液压缸伺服系统动态特性研究[J]. 中国机械工程,2004,15(6):471-474.
Wang C L,Ding F,Li Q P,et al. Research on dynamic characteristics of asymmetric cylinder controlled by symmetric four-way valve[J]. Chinese Mechanical Engineering, 2004,15(6):471-474.
[4]王栋梁,李洪人,张景春. 非对称阀控制非对称缸的分析研究[J]. 济南大学学报: 自然科学版, 2003,17(2):118-121.
Wang D L,Li H R,Zhang J C. The analysis and research of the asymmetric valve control unsymmetrical cylinder system [J]. Joural of Jinan University: Sci. & Tech. ,2003,17(2):118-121.
[5]高永卫,谭建平,杨俊. 大型装备电液系统鲁棒控制策略与实验验证[J]. 锻压技术,2015,40(5):90-95.
Gao Y W,Tan J P,Yang J. Control strategy and experimental verification on robust of electro-hydraulic system in large equipment[J]. Forging & Stamping Technology,2015,40(5):90-95
[6]杨军宏,尹自强,李圣怡. 阀控非对称缸的非线性建模及其反馈线性化[J]. 机械工程学报,2006,42(5):203-207.
Yang J H,Yin Z Q,Li S Y. Nonlinear modelling and feedback linearization of valve-controlled asymmetrical cylinder[J]. Chinese Journal of Mechanical Engineering, 2006,42(5):203-207.
[7]韩崇伟,林廷圻,肖文伟,等. 电液伺服系统滑动模态变结构控制[J]. 系统仿真学报,2002,14(6):821-823.
Han C W,Lin T Q,Xiao W W,et al. Variable structure control of the electro-hydraulic servo system[J]. Journal of System Simulation, 2002,14(6):821-823.
[8]靳宝全, 熊诗波,程珩. 电液位置伺服系统的变速趋近律滑模控制抖振抑制[J]. 机械工程学报,2013,49(10):163-169.
Jin B Q,Xiong S B,Cheng H. Chattering inhibition of variable rate reaching law sliding mode control for electro-hydraulic position servo system[J]. Chinese Jourmal of Machanical Engineering ,2013,49(10):163-169.
[9]白寒, 管成. 电液比例系统鲁棒自适应动态表面控制[J]. 浙江大学学报:工学版,2010,44(8):1441-1448.
Bai H,Guan C. Robust adaptive dynamic surface control of electro-hydraulic proportion system[J].Journal of Zhejiang University: Engineering Science,2010,44(8):1441-1448.
[10]Roozbahani H, Huapeng W,Handroos H. Real-time simulation based robust adaptive control of hydraulic servo system[A]. Mechatronics (ICM), 2011 IEEE International Conference[C]. Istanbul, 2011.
[11]Niksefat N,Sepehri N. Designing robust force control of hydraulic actuators despite system and environmental uncertainties[J]. IEEE Control Systems Magazine,2001,21(2):66-77.
[12]刘保杰,强宝民. 电液比例位置控制系统Fuzzy-PID控制的应用[J]. 仪表技术与传感器,2012, (2):82-84.
Liu B J,Qiang B M. Application of Fuzzy-PID control for electro-hydraulic proportional position control system[J]. Instrument Technique and Sensor, 2012, (2):82-84.
[13]刘忠伟,青先麒.巨型模锻液压机同步系统的模糊PID控制研究[J]. 锻压技术,2015,40(4):89-96.
Liu Z W,Qing X Q. Research on fuzzy PID control for synchronization system of giant die forging hydraulic press [J]. Forging & Stamping Technology,2015,40(4):89-96.
[14]Mesquine F,Tadeo F, Benzaouia A. Regulator problem for linear systems with contraints on control and its increment or rate[J]. Automatica, 2004,40(8):1387-1395.
|