锻压技术

基于冲压与数控渐进成形的复合成形

英文标题：Hybrid forming combining stamping with CNC incremental forming

作者：刘滢朱虎

单位：沈阳航空航天大学

分类号：TG335.5

出版年,卷(期):页码：2017,42(7):55-62

摘要：

针对冲压工艺难以成形形状复杂板材件、冲压模具难以制造或加工成本高以及单独采用数控渐进成形加工效率低的问题，提出基于冲压工艺与数控渐进成形工艺相结合的复合成形方法，并给出了基于冲压与数控渐进成形的复合成形的数值模拟方法。采用冲压成形、数控渐进成形和复合成形3种成形方式，以有限元分析软件数值模拟分析同一形状板材件，对比分析数值模拟后的板材件的轮廓尺寸精度与厚度分布。结果可知，采用复合成形得到的板材件轮廓尺寸精度与厚度分布能够满足实际应用，所提出的复合成形方法具有可应用性。

For difficulties of forming the sheet metal with complex shape by stamping and producing the stamping die, and the high forming cost and low forming efficiency if only using CNC incremental forming, a hybrid forming combining stamping with CNC incremental forming was proposed, and the numerical simulation method of hybrid forming was presented. For the sheet metals with the same shape, three methods of stamping forming, CNC incremental forming and hybrid forming were numerical simulated respectively by finite element software, and their shape precision and thickness distribution were comparatively analyzed. The results show that the shape precision and thickness distribution of sheet metal obtained by hybrid forming can meet the practical application, and the proposed hybrid forming method is feasible.

基金项目：

辽宁省自然科学基金资助项目(2014024011)

作者简介：刘滢(1992-)，女，硕士研究生，E-mail：1263744608@qq.com；通讯作者：朱虎(1964-)，男，博士，教授，E-mail：zhuhu10@163.com

参考文献：

[1]曾元松. 先进航空板材成形技术应用现状与发展趋势[J]. 航空科学技术，2012, (1): 1-4.

Zeng Y S. Application and development trend of advanced sheet metal[J]. Aeronautical Science & Technology，2012,(1): 1-4.

[2]高锦张. 板料数控渐进成形技术[M]. 北京:机械工业出版社，2011.

Gao J Z. NC Incremental Sheet Forming Technology[M]. Beijing: China Machine Press，2011.

[3]李光耀，王琥，杨旭静，等. 板料冲压成形工艺与模具设计制造中的若干前沿技术[J]. 机械工程学报，2010，46(10): 31-39.

Li G Y，Wang H，Yang X J，et al. Some new topics on process design and mould manufacture for sheet metal forming[J]. Journal of Mechanical Engineering，2010，46(10): 31-39.

[4]

[5]Olesik V，Bologa O，Breaz R，et al. Comparison between the numerical simulations of incremental sheet forming and conventional stretch forming process[J]. International Journal of Material Forming，2008, 1(1): 1187-1190.

[6]赵仕宇，周超，詹艳然. 基于数值模拟的圆锥台件渐进成形过程研究[J]. 热加工工艺，2013，42(15):101-104.

Zhao S Y，Zhou C，Zhan Y R. Study on incremental forming of cone part based on numerical simulation[J]. Hot Working Technology，2013，42(15): 101-104.

[7]Khalid AAl-Ghamdi， Hussain G. On the comparison of formability of roll-bonded steel-Cu hybrid sheet metal in incremental forming and stamping processes [J]. The International Journal of Advanced Manufacturing Technology，2016，87(1-4): 267-278.

[8]朱虎，林雯雯，刘一波，等. 金属板材数控渐进分区分阶段成形研究[J]. 锻压技术，2015，40（8）：5-8.

Zhu H，Lin W W，Liu Y B，et al.Study on CNC incremental sectioning and staging forming of sheet metal[J]. Forging & Stamping Technology，2015，40(8)：5-8.

[9]朱虎，李佳良，刘一波. 三轴与五轴数控渐进复合成形[J].锻压技术，2016，41（8）：18-23.

Zhu H，Li J L，Liu Y B.CNC incremental compound forming based on three-axis and five-axis[J].Forging & Stamping Technology，2016，41(8)：18-23.

[10]滕克磊，金朝海. 基于LS-DYNA的不锈钢车顶弯梁拉弯仿真[J].塑性工程学报, 2015, 22(2):24-29.

Teng K L，Jin C H. Numerical simulation of stretch bending of a stainless steel roof curve beam by use of LS-DYNA[J]. Journal of Plasticity Engineering，2015，22(2):24-29.

[11]肖景容，姜奎华. 冲压工艺学[M]. 北京:机械工业出版社, 1999.

Xiao J R，Jiang K H. Stamping Technology[M]. Beijing: China Machine Press，1999.

[12]林雯雯. 数控渐进反向CAD/CAM系统研究[D]. 沈阳:沈阳航空航天大学，2014.

Lin W W. A Study on CAD /CAM System for NC Incremental Reverse Forming[D]. Shenyang:Shenyang Aerospace University，2014.

服务与反馈：

【文章下载】【加入收藏】