锻压技术

基于灰色关联度筒形件强力旋压工艺参数优化

英文标题：Parameter optimization on cylinder power spinning based on grey correlation degree

作者：张涛樊文欣蔡智清李悦

单位：中北大学

分类号：TG376

出版年,卷(期):页码：2017,42(7):88-91

摘要：

错距旋压成形过程中，工艺参数的选取对其尺寸精度的好坏至关重要。采用正交试验法，选取减薄率、错距、旋轮圆角半径、进给比为试验因素，以工件圆度、直线度和内径扩径量为尺寸精度评价指标，获得9组试验数据。采用灰色关联度法对所得的正交试验数据进行分析处理，将多目标优化问题转化为单目标优化问题，并得出了优化的连杆衬套工艺参数组合方案。试验结果表明，采用优化的工艺参数对连杆衬套进行旋压，可有效地减小圆度误差、直线度误差和内径扩径量，提高旋压件的尺寸精度。

The selection of process parameters is very important to ensure the dimensional accuracy in the process of stagger spinning. The test data from nine groups were obtained based on orthogonal experiment by taking the roundness, straightness and inner diameter expansion amount as the evaluation indexes, and the thinning rate, stagger,round corner radius of spinning wheel and feed ratio as the experimental factors. The orthogonal test data were analyzed by the method of grey correlation degree analysis, and the multi-objective optimization problem was then turned to a single-objective optimization problem. Thus, the optimized process parameters for bushings of connecting rod were obtained. The result shows that the roundness error, straightness error and inner diameter expansion amount can be reduced, and the dimensional accuracy of spinning parts can be improved effectively by the optimized process parameters.

基金项目：

山西省自然科学基金资助项目(2012011023-2)；山西省高校高新技术产业化项目（20120021）

作者简介：张涛(1992-)，男，硕士研究生，E-mail：577910644@qq.com；通讯作者：樊文欣(1964-)，男，博士，教授，E-mail：fanwx@nuc.edu.cn

参考文献：

[1]张宁，檀雯，李永华，等. 筒形件错距旋压数值模拟及旋压力分析[J]. 沈阳理工大学学报,2009,28(5):55-62.

Zhang N，Tan W，Li Y H，et al. Numerical simulation and spinning force analysis for tube stagger spinning[J]. Transactions of Shenyang Ligong University,2009,28(5):55-62.

[2]周宇静，程秀全，夏琴香. 细长薄壁筒形件错距旋压成形工艺研究[J].轻合金加工技术,2011,39(8):30-34.

Zhou Y J，Cheng X Q，Xia Q X. Research on stepped spinning process of long and slim thin wall tube[J].Light Alloy Fabrication Technology,2011,39(8):30-34.

[3] 刘思峰，杨英杰，吴利丰.灰色系统理论及其应用[M].北京：科学出版社，2014.

Liu S F，Yang Y J，Wu L F. The Grey System Theory and Application[M].Beijing：Science Press，2014.

[4]赵建社，郁子欣，周旭娇，等.基于灰色理论的钛合金电火花加工工艺参数优化试验[J].中国机械工程,2015,26(14):1877-1882.

Zhao J S，Yu Z X，Zhou X J，et al. Experiments of parameter optimization of EDM titanium alloy based on gray relation theory [J].China Mechanical Engineering,2015,26(14): 1877-1882.

[5]夏琴香，张鹏，程秀全，等. 筒形件错距旋压成形工艺参数的正交试验研究[J].锻压技术,2012,37(6):41-46.

Xia Q X，Zhang P，Cheng X Q，et al. Orthogonal experimental study on forming process parameters of tube stagger spinning [J]. Forging & Stamping Technology,2012,37(6):41-46.

[6]王跃，樊文欣，李波，等. 强力旋压主要参数对连杆衬套回弹影响的正交试验分析[J]. 热加工工艺,2016,45(3):125-127.

Wang Y，Fan W X，Li B，et al. Orthogonal test analysis on influence of power spinning main parameters on springback of connecting rod bushing[J].Hot Working Technology,2016,45(3):125-127.

[7] 田辉.筒形件旋压成形有限元模拟及工艺分析[D]. 大连：大连理工大学，2010.

Tian H.Finite Element Simulation and Process Analysis of Tube Spinning[D].Dalian:Dalian University of Technology，2010.

[8] 丁玲.圆度与圆柱度误差评定算法的设计与应用[D].西安:西安电子科技大学，2013.

Ding L. Design and Application of Roundness and Cylindricity Error Evaluation Algorithms[D].Xi′an:Xidian University，2013.

[9] 黄富贵，崔长彩.评定直线度误差的最小二乘法与最小包容区域法精度之比较[J].光学精密工程,2007,15(6):889-893.

Huang F G，Cui C C. Comparison of evaluating precision of straightness error between least square method and least envelope zone method[J].Optics and Precision Engineering,2007,15(6):889-893.

[10]孙首群,张书魁,黄梅仙. 基于信噪比及灰关联度的注塑工艺参数优化[J]. 塑性工程学报,2016,23 (1):141-145.

Sun S Q，Zhang S K，Huang M X. Optimization of injection molding process parameters based on signal-to-noise ratio and gray relational grade[J]. Journal of Plasticity Engineering,2016, 23(1):141-145.

[11]刘春景，唐敦兵，何华，等.基于灰色关联和主成分分析的车削加工多目标优化[J].农业机械学报,2013,44(4):293-298.

Liu C J，Tang D B，He H，et al. Multi-objective optimization of turning based on grey relational and principal component analysis[J]. Transactions of the Chinese Society of Agricultural,2013,44(4):293-298.

[12]席奇豪，樊文欣，吕伟，等. 基于灰色关联度的连杆衬套强力旋压参数优化[J]. 锻压技术,2016, 41(7):114-117.

Xi Q H，Fan W X，Lyu W，et al. Optimization on power spinning parameters for connecting rod bushing based on grey relational degree[J]. Forging & Stamping Technology, 2016, 41(7):114-117.

服务与反馈：

【文章下载】【加入收藏】