锻压技术

5A90 Al-Li合金板材脉冲电流辅助拉深成形

英文标题：Pulse current auxiliary deep drawing for Al-Li alloy sheet 5A90

作者：易卓勋赖小明王博张凯锋肖寒

分类号：TG316

出版年,卷(期):页码：2017,42(8):28-32

摘要：

为了解决5A90 Al-Li合金塑性加工困难的问题，通过理论分析与实验测试相结合的方法，对5A90 Al-Li合金板材的脉冲电流加热特性进行了研究。研究发现，10 A·mm-2的脉冲电流可在2 min内将板材加热到300 ℃。通过单向拉伸试验对5A90 Al-Li合金板材的高温力学性能进行了测试，测试结果表明，300 ℃时，板材的伸长率可达63.4%。以脉冲电流加热特性和高温力学性能的研究为基础，对板材试验件的成形过程进行了设计，经脉冲电流加热后成形的试验件尺寸精度满足设计要求，且表面质量良好，无裂纹、划伤等缺陷。脉冲电流辅助热成形技术为5A90 Al-Li合金钣金薄壁类零件的塑性加工提供了一条简便、高效的途径。

In order to solve the difficulty in producing Al-Li alloy 5A90, the heating characteristics of sheet 5A90 heated by pulse current were studied by the theoretical analysis and experimental test. It is found that the sheet 5A90 can be heated to 300 ℃ in two minutes by pulse current of 10 A·mm-2. Then, the mechanical properties of sheet 5A90 at high temperature were tested by uniaxial tensile test. The results show that the elongation of sheet 5A90 can reach 63.4% at 300 ℃. Furthermore, based on the study of heating characteristics and mechanical properties, the forming process of workpiece 5A90 is designed, and the stringer 5A90 is successfully formed by the process of pulse current assisted thermoforming. Finally, the dimensional accuracy of the workpiece meets the design requirements and the surface quality is good without cracks and scratches. The pulse current assisted thermoforming technology provides a simple and efficient way for the forming of Al-Li alloy 5A90 parts with thin-wall.

基金项目：

国家自然科学基金资助项目（51405487）

易卓勋（1992-），男，硕士，助理工程师王博（1984-），男，博士，高级工程师

参考文献：

［1］Wanhill R J H, Prasad N E, Gokhale A A. Aluminum-Lithium Alloys: Processing, Properties and Applications [M]. United Kingdom: Butterworth-Heinemann, 2013.
［2］宋鹏超, 李细锋, 陆彬, 等. 电塑性效应下5A90铝锂合金折弯性能[J]. 塑性工程学报, 2014，21(4): 38-41.Song P C, Li X F, Lu B, et al. Study on the electroplastic effect on the bending properties of 5A90 Al-Li alloys [J]. Journal of Plasticity Engineering, 2014, 21(4):38-41.
［3］郭奕文, 邓运来, 王宇,等. 2024铝合金航空座椅支撑零件等温模锻成形研究[J]. 锻压技术, 2016,41(8): 12-16.Guo Y W, Deng Y L, Wang Y, et al. Study on isothermal mould forging for aviation seat supporting parts of aluminum alloy 2024[J]. Forging & Stamping Technology, 2016, 41(8): 12-16.
［4］方进秀, 莫健华, 崔晓辉,等. 铝合金筒形件的电磁脉冲辅助渐进拉深成形[J]. 塑性工程学报, 2016, 23(3):58-61.Fang J X, Mo J H, Cui X H, et al. Electromagnetic pulse assisted incremental deep drawing of aluminum cylindrical cup[J]. Journal of Plasticity Engineering, 2016, 23(3):58-61.
［5］Salandro W A, Jones J J, Bunget C, et al. Electrically Assisted Forming: Modeling and Control [M]. Germany: Springer, 2015.
［6］王博, 张凯锋, 赖小明, 等. SiCp/2024Al复合材料板材脉冲电流辅助拉深成形[J]. 锻压技术, 2012, 37(5): 22-26.Wang B, Zhang K F, Lai X M, et al. Pulse current auxiliary deep drawing of SiCp/2024Al composites sheet [J]. Forging & Stamping Technology, 2012, 37(5):22-26.
［7］Song H, Wang Z J. Improvement in formability of TiAl and Ti alloys by high density electropulsing [J]. Materials Science & Technology, 2013, 21(5):117-124.
［8］张宁, 张艳苓, 毕静, 等. 1420铝锂合金电致超塑性本构方程[J]. 锻压技术, 2015, 40(5): 63-68.Zhang N, Zhang Y L, Bi J, et al. Constitutive equation of electro-superplastic for 1420 Al-Li alloy[J]. Forging & Stamping Technology, 2015,40(5):63-68.
［9］Hosoi A, Kishi T, Ju Y. Healing of fatigue crack by high-density electropulsing in austenitic stainless steel treated with the surface-activated pre-coating [J]. Materials, 2013, 6(9):4213-4225.
［10］邓德伟, 刘倩倩, 牛婷婷, 等. 脉冲电流对奥氏体不锈钢止裂效果的影响[J]. 热加工工艺, 2015,44 (16) :49-52.Deng D W, Liu Q Q, Niu T T, et al. Effect of pulse current on crack arrest of austenitic stainless steel [J]. Hot Working Technology, 2015, 44(16) :49-52.
［11］杜引, 赵亦希, 于忠奇,等. 2060-T8铝锂合金电致塑性本构方程[J]. 塑性工程学报, 2017, 24(1):133-139.Du Y, Zhao Y X, Yu Z Q, et al. Constitutive equation of electroplastic effect for 2060-T8 Al-Li alloy [J]. Journal of Plasticity Engineering, 2017, 24(1):133-139.
［12］李超, 张凯锋, 蒋少松. 轻合金板材超塑成形中的脉冲电流加热方法及其宏微观分析[J]. 机械工程学报, 2011, 47(18): 43-49.Li C, Zhang K F, Jiang S S. Pulse Current heating method for light alloy superplastic forming and macroscopic and microscopic effects analysis[J]. Journal of Mechanical Engineering, 2011, 47(18):43-49.

服务与反馈：

【文章下载】【加入收藏】