锻压技术

基于CAE的汽车动力电池固定支架冷冲压工艺设计与分析

英文标题：Design and analysis on stamping process of car power battery fixed bracket based on CAE

作者：刘雯曹航畅施艺旋刘斐然李海鹏

单位：河北工业大学

分类号：TG386.1

出版年,卷(期):页码：2017,42(9):35-41

摘要：

以汽车动力电池固定支架为研究对象，基于CAE软件Dynaform对该产品的冷冲压工艺进行设计与分析。通过CAD软件UG建立产品的三维数字模型，结合产品的材质、结构特点、精度和质量要求，确定了产品的冷冲压工艺方案为落料、拉延、冲孔修边。重点利用Dynaform软件对其拉延工序的工艺设计及参数进行数值模拟，依据模拟结果的成形极限图，获得了压边力、润滑条件和拉延筋参数对产品成形质量的影响。在压边力为700 kN、采用液体润滑剂（摩擦系数0.05）和拉延筋高度为7 mm、宽度为11 mm、圆角半径为4 mm、槽凸缘半径为3 mm的条件下，避免了产品出现起皱、拉裂、变形不足等缺陷，保证了产品的成形质量。

The car power battery fixed bracket process was designed and analyzed based on CAE software (Dynaform), and the contents of stamping process plan were determined as blanking, drawing and trimming-piecing by a 3D digital model of CAD software (UG) with considerations of the material, structure features, precision and quality requirements. With a focus on the simulation of process design and parameters of drawing process by software Dynaform, the influences of blank-holder force, lubrication condition and drawbead parameters on the forming quality were obtained according to the forming limit diagram of simulative results. Under the conditions of blank-holder force 700 kN, liquid lubricant (friction coefficient 0.05), drawbead height 7 mm, drawbead width 11 mm, fillet radius 4 mm and slot flange radius 3 mm, the defects such as wrinkling, cracking and insufficient deformation are avoided, and the forming quality of the product is ensured.

基金项目：

河北省科技支撑计划项目(13211027)；国家级大学生创新创业训练计划项目(201710080024)

作者简介：刘雯（1996-），女，本科，助理工程师 E-mail：1554691498@qq.com 通讯作者：李海鹏（1977-），男，博士，教授 E-mail:lhpcx@163.com

参考文献：

［1］孟冬菊，杨平. 基于Dynaform的汽车扭梁成形仿真研究 [J]. 金属加工，2015，（3）：28-30.

Meng D J, Yang P. Research on simulation of automobile torsion beam forming based on Dynaform [J]. Metal Forming, 2015, (3): 28-30.

［2］邱绍虎. 我国汽车车身覆盖件模具的现状及展望 [J]. 金属加工，2015，（2）：21-22.

Qiu S H. Present situation and prospect of auto body panel die in China [J]. Metal Forming, 2015, (2): 21-22.

［3］李钦生，杨海卉，袁帮谊. 汽车覆盖件多工位复合成形工艺研究及模具设计 [J]. 锻压技术，2015，40(6)：98-101.

Li Q S, Yang H H, Yuan B Y. Research and die design on multi-position and compound forming process of auto cover part [J]. Forging & Stamping Technology, 2015, 40(6): 98-101.

［4］Luo Q S, Hou Y, Zhang Z Z, et al. Body structure design, simulation and parameter optimization of a crawler type mobile flat bedplate frame composite car [J]. Computer Aided Drafting, Design and Manufacturing, 2013, (4): 53-57.

［5］郭策安，韩继龙，程春，等. 基于CAE的变壁厚深锥药型罩冷冲压制造工艺 [J].锻压技术，2016，41（1）：20-24.

Guo C A, Han J L, Cheng C, et al. Manufacture of deep-cone shaped charge liner with changeable wall thickness in cold stamping based on CAE [J]. Forging & Stamping Technology, 2016, 41(1): 20-24.

［6］Guan P C, Fan J W, Wang L H, et al. Study on the forming process parameters of automobile front panel reinforcing plate using orthogonal experiment method by numerical simulation technology [J]. Applied Mechanics and Materials, 2013, 270: 458-463.

［7］李海鹏，徐扬，连鹏豪，等. 变速杆加强板冷冲压成形工艺的设计与分析 [J]. 河北工业大学学报，2016， 45(4)：53-62.

Li H P, Xu Y, Lian P H, et al. Design and analysis of cold stam-ping process of the shift lever reinforcing plate [J]. Journal of Hebei University of Technology, 2016, 45(4): 53-62.

［8］吴云龙. 新型汽车模具公司技术准备与生产特点 [J]. 商用汽车，2013，（20）：80-83.

Wu Y L. Technical preparation and production characteristics of late-model automobile mould companies [J]. Commercial Vehicle, 2013, (20): 80-83.

［9］丁松聚. 冷冲模设计 [M]. 北京：机械工业出版社，2001.

Ding S J. Design of Cold-stamping Die [M].Beijing: China Machine Press, 2001.

［10］胡平. 汽车覆盖件模具设计 [M]. 北京：机械工业出版社，2012.

Hu P. Automobile Panel Die Design [M]. Beijing: China Machine Press, 2012.

［11］Reddy S, Abbasi M, Fard M. Multi-cornered thin-walled sheet metal members for enhanced crashworthiness and occupant protection [J].Thin-Walled Structures, 2015, 94: 56-66.

［12］《现代模具技术》编委会. 汽车覆盖件模具设计与制造 [M]. 北京：国防工业出版社，1998.

Modern Die Technology Editorial Committee. Design and Manufacture of Automobile Panel Die [M]. Beijing: National Defense Industry Press, 1998.

［13］胡江波，柳玉起，章志冰. 车身覆盖件模具的拉延筋工艺设计与优化 [J]. 锻压技术，2008，33(1)：69-73.

Hu J B，Liu Y Q，Zhang Z B. Process design and optimization of drawbead on autobody panel die [J]. Forging & Stamping Technology, 2008, 33(1): 69-73.

［14］关来德. SUV车型侧围外板冲压工艺的数值模拟分析 [J]. 锻压技术，2016，41(12)：170-175.

Guan L D. Numerical simulation analysis on stamping process of side outer panel for SUV vehicle [J]. Forging & Stamping Technology, 2016, 41(12): 170-175.

［15］陈文亮. 板料成形CAE分析教程 [M]. 北京：机械工业出版社，2005.

Chen W L. CAE analysis Course of Sheet Metal Forming [M]. Beijing: China Machine Press, 2005.

服务与反馈：

【文章下载】【加入收藏】