锻压技术

热轧酸洗搪瓷钢板STC330R的组织与性能

英文标题：Microstructure and property of hot rolled and pickled steel STC330R for enameling

作者：郭子峰冯军张 李文远李玉鹏周娜

分类号：TG335.35

出版年,卷(期):页码：2017,42(10):170-173

摘要：

简要介绍了首钢热轧酸洗搪瓷钢板STC330R的生产工艺流程、成分设计，研究了两种不同热轧工艺方案下产品力学性能、金相组织及析出相形态，分析了不同热轧工艺下析出相尺寸、分布等对产品氢渗透时间的影响。实验结果表明，以低碳低锰成分体系为基础、添加少量Ti元素进行微合金强化，并采用合适的热轧工艺制度生产的热轧酸洗搪瓷钢板STC330R的基体组织为铁素体+少量珠光体，存在细小且弥散分布的析出相TiC，其力学性能满足标准要求，氢渗透时间长于国内同级别产品，抗鳞爆性能优异。

The production process and composition design of hot rolled and pickled steel STC330R for enameling of Shougang were briefly introduced, and the mechanical properties, metallographic structures and precipitated phase of STC330R were investigated under two different hot rolling schemes. Then, the influences of size and distribution of precipitation phase on hydrogen permeation time of products under different hot rolling processes were analyzed. The result indicates that based on the low carbon and manganese composition system，the micro alloy is strengthened by adding small amounts of Ti, and the matrix microstructure of hot rolled and pickled steel STC330R for enameling is composed of ferrite and pearlite by proper hot rolling process. Thus, the fine TiC particles are uniformly distributed inside grains, and the mechanical properties of STC330R meet the standard requirements. In addition, the hydrogen penetration time is longer than that of other same grade products, which means excellent antisquama burst performance.

基金项目：

首钢总公司科技项目（2014科1-5）

作者简介：郭子峰（1984-），男，博士，工程师，E-mail：guozifeng@shougang.com.cn

参考文献：

[1]郭子峰，冯军，白永立. 首钢汽车结构用热轧酸洗带钢SAPH440的开发[J]. 锻压技术，2015，40(2)：60-64.

Guo Z F, Feng J, Bai Y L. Development of hotrolled and pickled strip steel SAPH440 for automobile structure of Beijing Shougang Co., Ltd.[J]. Forging & Stamping Technology，2015，40(2)：60-64.

[2]张大伟，高彩茹，肖宝亮， 500 MPa级高疲劳寿命汽车轮辐钢的开发 [J]．塑性工程学报，2015，22(5)：114-117.

Zhang D W, Gao C R ,Xiao B L. The development of 500 MPa grade wheels arm steel with high fatigue property[J]. Journal of Plasticity Engineering，2015，40(2)：114-117.

[3]王东明. 双面搪瓷用高强度热轧钢板性能控制技术研究[D]．鞍山：辽宁科技大学，2007.

Wang D M. The Control Technology Research about Double Enamel is Used for High Strength Hot Rolling Steel Plate[D]. Anshan: University of Science and Technology Liaoning, 2007.

[4]孙全社. 宝钢搪瓷用钢的开发与应用[J].上海金属，2005，27(6)：47-50.

Sun Q S. Development and application of enameling sheet steels at Baosteel [J].Shanghai Metals，2005，27(6)：47-50.

[5]Shieu F S, Lin K C, Wong J C. Microstructure and adherence of porcelain enamel to low carbon steel[J]. Ceramics International, 1999，25(1): 27-34.

[6]Schttler J, Flaxa V, Hulka K. Influence of composition and processing conditions on mechanical properties and fishscale resistance of microalloyed steels for doubleface vitreous enamelling [J]. Materials Science Forum，2005，500-501：527-534.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】