锻压技术

汽车半轴锻造成形工艺设计

英文标题：Forging process design of automobile half-axle

作者：陶善虎肖来斌秦学枫陈力陈文琳

分类号：TG115.5

出版年,卷(期):页码：2017,42(12):6-10

摘要：

针对半轴法兰盘摆辗成形工艺中存在的分模面飞边、盘部厚薄不均、产生纵向飞边等问题，拟采用液压机闭式模锻工艺成形半轴法兰盘。通过有限元软件对闭式模锻工艺进行了数值模拟分析，根据充填效果、终锻温度场、行程载荷、等效应变和等效应力的分布，验证了成形工艺的正确性并优化了模具结构。在液压机上成功试制出半轴锻件，工艺试验结果与模拟结果吻合，成形产品尺寸精度高，质量可靠,满足设计要求。与原有工艺相比，存在的问题基本消除，产品一致性好，免去了粗车加工。

For the problems of flash at parting surface，out-of-flatness and longitudinal flash in the rotary forming of automobile half-axle flange, the half-axle flange was produced by the hydraulic press closed die forging, and its forging process was simulated by the finite element numerical simulation. Based on the filling effect, finish forging temperature field, the load-stroke, equivalent strain and equivalent stress distribution, the forming technology was verified, and the die structure was optimized. Then, the half-axle flange forging was produced by hydraulic press, which showed a good agreement with numerical simulation results, the forming products met the design requirements with high dimensional accuracy and reliable quality. The result show that the existing defects are basically eliminated comparied to the original technology, as well as the rough machining is avoided because of good product consistency.

基金项目：

作者简介：陶善虎（1962- ），男，硕士，高级工程师 E-mail：TSH103@vip.sina.com 作者简介：陈文琳（1963- ），女，博士，教授 E-mail：wlchen8761@126.com

参考文献：

［1］赵静. 汽车半轴成形技术研究现状及展望[J]．冶金设备，2004，25(6)：32-34.

Zhao J. The future and actuality of study on technology in forming automobile semiaxes [J]. Metallurgical Equipment，2004，25(6)：32-34.

［2］李和平，金曼曼. 汽车半轴的热挤压成形工艺[J]. 塑性加工技术，2003，38(5)：35-36.

Li H P, Jin M M. Forming technology of heating extrusion of auto semi-axle [J]. Plastic Working Technology，2003，38(5)：35-36.

［3］袁文生. 楔横轧工艺在汽车半轴生产中的应用[J]．锻压装备与制造技术，2005，40(3)：89-90.

Yuan W S. Application of cross wedge rolling technology in production of automobile half shaft[J]．China Metalforming Equipment & Manufacturing Technology，2005，40(3)：89-90.

［4］许伟伟. 工程重载用车驱动半轴锻造工艺分析[J]．锻造与冲压，2016，(9)：33-38.

Xu W W, Analysis of forging process for driving axle of heavy duty vehicle[J]．Forging & Metalforming，2016，(9)：33-38.

［5］张兰．汽车半轴加工工艺改进试验及经济效益分析[J]．安徽科技，2008，(8)：41.

Zhang L. Experiment and economic benefit analysis of automobile half shaft machining [J]．Anhui Science & Technology，2003，(8)：41.

［6］周志明, 刘兵, 罗天星,等. 汽车空心半轴的精锻工艺及显微组织研究[J]. 锻压技术, 2016, 41(3):9-12.

Zhou Z M, Liu B, Luo T X, et al. Research on precision forging process and microstructure of automobile hollow semi-axle [J]. Forging & Stamping Technology, 2016, 41(3):9-12.

［7］中国机械工程学会锻压学会.锻压手册[M]．北京：机械工业出版社，1993.

Institute of Forging Pressure of Chinese Mechanical Engineering Society. Forging Handbook[M]．Beijing：China Machine Press，1993.

服务与反馈：

【文章下载】【加入收藏】