锻压技术

旋耕刀辊锻成形工艺的数值模拟与试验验证

英文标题：Numerical simulation and test verification on roll forging technology for rotary blade

作者：吴胜超刘华刘百宣刘光辉

单位：郑州机械研究所

关键词：旋耕刀辊锻数值模拟金属流动力矩

分类号：TG316

出版年,卷(期):页码：2018,43(1):9-13

摘要：

由于辊锻过程中的金属流动和变形规律还未被完全掌握，工艺设计主要依靠生产经验，坯料形状及尺寸选取的是否合理对辊锻件影响较大。以某新型号的旋耕刀为例，依靠经验设计3种不同形状、尺寸的坯料，并利用有限元软件Deform-3D对旋耕刀进行辊锻模拟，选取了合理的坯料，分析了辊锻过程中的金属流动规律，研究了辊锻模具的受载荷情况以及辊锻力矩。根据模拟结果，对所设计的坯料的形状和尺寸进行修正，并进行了生产试制。试制的样品与模拟结果基本一致，表明有限元模拟可以为旋耕刀的辊锻工艺以及坯料选择提供有效的参考。

The metal flow and deformation rules in the roll forging process have not been fully mastered, and the process design mainly depends on the experience. Thus, the selection of shape and size for billet has a great influence on the roll forging products. For a new type of rotary blade, three kinds of billets with different shapes and sizes were designed by experiences, and the roll forging process of rotary blade was simulated by the FEM soft Deform-3D. Then, a reasonable billet was selected, and the metal flow rule during the roll forging process was analyzed. Furthermore, the load of roll forging dies was studied and the torque of roll forging was calculated. According to the results of simulation, the designed shape and size of billet were revised, and then the trial sample of rotary blade was manufactured, which was consistent with the simulation results. The result shows that the numerical simulation offers an effective reference for the roll forging process and billet selection of rotary blade.

基金项目：

郑州市科技重大专项资金（152PZDZX007）

作者简介：吴胜超（1992-），男，硕士研究生，E-mail：13273814152@163.com。通讯作者：刘华（1962-），男，博士，博士生导师，研究员，E-mail：13903832971@163.com

参考文献：

[1]宋玉泉.连续局部塑性成形的发展前景[J].中国机械工程，2000，11(1)：65-66.

Song Y Q.The prospect of successive partial plastic forming[J].Chinese Mechanical Engineering，2000，11(1)：65-66.

[2]蒋鹏，方钢，胡福荣，等.汽车前轴精密辊锻成形过程的数值模拟[J].机械工程学报，2005，41(6)：123-127.

Jiang P，Fang G，Hu F R，et al.Numerical simulation for precision roll forging of automobile front axle [J].Journal of Mechanical Engineering，2005，41(6)：123-127.

[3]杨勇.重卡前轴预成形辊锻技术的研究[D].北京：机械科学研究总院，2009.

Yang Y.Study on the Pre-forming Roll Forging Technology for the Heavy Truck Front Axle[D].Beijing：China Academy of Machinery Science & Technology，2009.

[4]Jafari A，Khanali M，Mobli H，et al. Stress analysis of front axle of JD 955 combine harvester under static loading [J]. Journal of Agriculture & Social Sciences，2006，2(3)：133-135.

[5]胡福荣.前轴精辊成形过程的三维有限元数值模拟 [D].北京：北京机电研究所，2003.

Hu F R. Numerical Simulation for Precision Roll Forging of Automobile Front Axle[D].Beijing：Beijing Research Institute of Mechanical & Electrical Technology，2003.

[6]王华君，夏巨谌，胡国安，等.前轴成型辊锻工艺及三维有限元模拟[J].华中科技大学学报：自然科学版，2005，33(7)：84-86.

Wang H J， Xia J S， Hu G A， et al.Roll forging technology and its 3D finite element simulation of automobile front axle [J].Journal of Huazhong University of Science and Technology：Nature Science，2005，33(7)：84-86.

[7]Satish G D，Singh N K，Ohdar R K.Preform optimization of pad section of front axle beam using Deform [J].Journal of Materials Processing Technology，2008，203(1)：102-106.

[8]周杰，柳豪，刘旭光，等. 某重型卡车前轴成形辊锻工艺设计与优化[J].重庆大学学报：自然科学版，2012，35 (3): 67-73.

Zhou J，Liu H，Liu X G，et al. Design and optimization of the precision roll forging on a heavy truck front axle[J]. Journal of Chongqing University: Nature Science Edition，2012，35 (3): 67-73.

[9]吕霄，刘艳雄，王孝文.汽车前轴第 1 道次辊锻成形工艺有限元模拟与实验[J].锻压技术，2017，42 (2)：5-11.

Lyu X，Liu Y X，Wang X W.Finite element simulation and experimental research on the automobile front axle beam in the preliminary roll forging process [J].Forging & Stamping Technology， 2017，42(2)：5-11.

[10]Zhuang W， Hua L， Wang X， et al.Numerical and experimental investigation of roll-forging of automotive front axle beam[J].International Journal of Advanced Manufacturing Technology，2015，79 (9-12)：1-17.

[11]吕炎. 锻模设计手册[M]. 北京：机械工业出版社,2006.

Lyu Y. Design Manual of Forging Die [M].Beijing：China Machine Press，2006.

[12]蒋鹏，付殿禹，曹飞，等.铁路货车钩尾框精密辊锻过程数值模拟[J].锻压技术，2007，32 (3)：107-110.

Jiang P，Fu D Y，Cao F，et al.FEM analysis of precision roll forging process for train coupler yokes [J].Forging & Stamping Technology，2007，32(3)：107-110.

服务与反馈：

【文章下载】【加入收藏】