|
摘要：
|
|
从切挤复合精整的变形特点入手，通过物理实验方法，分析了精整余量、主模具圆角半径等工艺参数和坯料材质、工件轮廓形状等因素对精整表面成形质量的影响，为实际生产提供了可靠参考。结果表明，精整余量和主模具圆角半径是影响成形质量的关键参数，对精整工艺存在交互影响；塑性好、精整余量小、材料厚度小、主模具圆角半径大时，切挤复合精整成形面折光亮带宽度就大；相同参数下，塑性好的材料容易获得好的表面质量，内凹轮廓比外凸轮廓更容易得到较高的成形质量；主模具表面质量对工件成形表面具有复印作用。
|
|
For the forming characteristics of cutting-extruding compound trimming, the influences of process parameters such as finishing allowance, fillet radius of main die and factors such as blank material, blank profile shape on finishing surface quality were analyzed by physical experiment, which provided a reliable reference for the actual production. The result indicates that finishing allowance and fillet radius of main die are the most important factors affecting the forming quality, and they have an interactive effect on the finishing process. The width of the bright zone of the cutting-extruding compound finishing surface is larger with good plasticity, small finishing allowance, small material thickness and large fillet radius of main die. Moreover, with the same parameters, parts with good plasticity are easy to get good surface quality, while parts with inner concave profile are easier to obtain a high quality than that with outer convex profile. And the surface quality of main die has a copy effect on the forming surface of parts.
|
|
基金项目：
|
|
国家自然科学基金资助项目（51375521）
|
|
作者简介：
|
|
作者简介：吉梦雯 (1995-)，女，硕士研究生
E-mail：1720205497@qq.com
通讯作者：樊文欣(1964-)，男，博士，教授
E-mail：fanwx@nuc.edu.cn
|
|
参考文献：
|
［1］ 原霞,王铁,樊文欣,等. 基于Simufact的连杆衬套旋压工艺参数的模拟研究
［J］. 热加工工艺,2013,42(1):63-66.
Yuan X, Wang T, Fan W X, et al. Simulation research on spinning parameters of connecting rod bushing based on Simufact
［J］. Hot Working Technology, 2013,42 (1): 63-66.
［2］ 吕伟,樊文欣,王跃,等.连杆衬套旋压尺寸精度分析
［J］.塑性工程学报,2016,23(3):29-33.
Lyu W, Fan W X, Wang Y, et al. Analysis of dimensional accuracy of connecting rod bushing spinning.
［J］ .Journal of Plasticity Engineering,2016,23(3):29-33.
［3］ 樊文欣,张涛,宋河金,等. 强力旋压加工的铜合金连杆衬套
［J］.车用发动机,1997,(2):32-35.
Fan W X, Zhang T, Song H J, et al. The engine with copper alloy rod bushing
［J］. Vehicle Engine, 1997, (2):32-35.
［4］ 罗亚军,何丹农,张永清,等. 人工神经网络在塑性成形领域中的应用研究
［J］. 锻压技术,2001,26(5):46-49.
Luo Y J, He D N, Zhang Y Q, et al. Application of artificial neural networks in the field of plastic forming
［J］. Forging & Stamping Technology, 2001, 26(5): 46-49.
［5］ 盛仲飙. BP神经网络原理及MATLAB仿真
［J］. 渭南师范学院学报,2008,23(5): 65- 67.
Sheng Z B. BP neural network theory and MATLAB simulation
［J］. Journal of Weinan Normal University, 2008,23 (5): 65- 67.
［6］ 梁大珍,樊文欣,冯志刚,等. 强力旋压连杆衬套的工艺参数优化
［J］. 中国农机化学报,2015,36(3):229-232.
Liang D Z, Fan W X, Feng Z G, et al. Optimization of process parameters for power spinning connecting rod
［J］. Journal of Chinese Agricultural Mechanization, 2015, 36(3): 229-232.
［7］ 吕创能,樊文欣,舒成龙. 基于BP神经网络的锡青铜连杆衬套磨损量预测
［J］.河北农机,2016,(1):52-54.
Lyu C N, Fan W X, Shu C L. Prediction of wear capacity of tin bronze connecting rod bushing based on BP neural network
［J］. Hebei Agricultural Machinery, 2016, (1): 52-54.
［8］ 周品.MATLAB神经网络设计与应用
［M］. 北京：清华大学出版社,2013.
Zhou P. Design and Application of MATLAB Neural Network
［M］. Beijing: Tsinghua University Press, 2013.
［9］ 高立,樊文欣,马学军,等. 基于RBF神经网络的强力旋压连杆衬套成形质量预测研究
［J］. 锻压技术,2015,40(9):134-138.
Gao L, Fan W X, Ma X J, et al. Study on forming quality prediction of power spinning connecting rod bushing based on RBF neural network
［J］. Forging & Stamping Technology, 2015,40 (9): 134-138.
［10］ 佘勇,樊文欣,陈东宝,等. 基于RBF神经网络的强力旋压连杆衬套力学性能预测研究
［J］. 锻压技术,2016,41(6):128-132, 145.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
