锻压技术

HC六辊冷轧机垂扭耦合振动分析

英文标题：Analysis of vertical torsional coupled vibration of six-roll cold rolling mill HC

作者：刘文彦

单位：绵阳职业技术学院

分类号：TG331

出版年,卷(期):页码：2018,43(3):124-127

摘要：

轧机系统异常耦合振动是影响轧件质量的重要因素。通过对某钢厂2180型六辊冷轧机的现场测试及分析发现工作辊的异常振动会传递到主传动系统中，造成齿轮箱等部件的故障，万向接轴并未有效隔断振动的传递。根据实际参数建立了包含主传动系统扭转振动和工作辊垂直振动的轧机耦合振动数学模型，并求解了模型的响应特性。同时，通过仿真分析发现了轧机垂扭耦合振动的真实性。定量分析发现系统发生耦合振动时工作辊扭转角及振动位移变化相对较大，扭转振动对垂直振动的影响较为明显。此方法为抑制轧机系统振动、减少设备故障提供了理论依据。

The abnormal vibration of rolling mill system is an important factor affecting the quality of workpiece. Through the field test and analysis of the six-roll cold rolling mill 2180 in a steel mill, the abnormal vibration of the work roll was transmitted to the main transmission system, which results in the failure of the gear box and other parts. However, the universal joint shaft did not effectively cut off vibration transmission. Based on the actual parameters, a mathematical model of the coupled vibration of the rolling mill including torsional vibration of main transmission system and vertical vibration of work roll was established, and the response characteristics of the system were solved. At the same time, the existence of vertical torsional coupled vibration of rolling mill was found by simulation analysis. Furthermore, quantitative analysis shows that the changes of work roll torsion angle and vibration displacement are relatively large during coupling vibration of the system，and the torsional vibration effects on the vertical vibration are more obvious. This method provides a theoretical reference for suppressing the vibration of rolling mill system and reducing equipment failure.

基金项目：

国家自然科学基金资助项目（51375019）

刘文彦(1972-)，男，硕士，讲师 E-mail：lwy197210@126.com

参考文献：

［1］张志静.六辊轧机扭转和垂直振动特性研究
［D］.武汉：武汉科技大学,2013.
Zhang Z J. Research on Torsional and Vertical Vibration Characteristics of Six Roll Mill
［D］. Wuhan: Wuhan University of Science and Technology, 2013.

［2］闫晓强. 热连轧机机电液耦合振动控制
［J］. 机械工程学报，2011，47(17)：61-65.
Yan X Q. Electro hydraulic coupling vibration control of hot strip mill
［J］. Chinese Journal of Mechanical Engineering, 2011, 47 (17):61-65.

［3］闫晓强，吴先峰，杨喜恩. 热连轧机扭振与轴向振动耦合研究
［J］. 工程力学，2014，31(2)：214 - 218.
Yan X Q, Wu X F, Yang X E. Study on coupled torsional vibration and axial vibration of hot strip mill
［J］. Engineering Mechanics, 2014, 31 (2):214-218.

［4］ Liu H S，Zhang J，Mi K F. Simulation on hydraulic-mechanical coupling vibration of cold strip rolling mill vertical system
［J］. Advance Materials Research，2013，694-697：407-414.

［5］曾令强，臧勇，郜志英，等. 轧机整体耦合建模问题研究
［J］. 机械工程学报，2015，51(14)：46-53.
Zeng L Q, Zang Y, Gao Z Y, et al. Study on the integral coupling modeling of rolling mill
［J］. Chinese Journal of Mechanical Engineering, 2015, 51(14):46-53.

［6］谷立臣，段志善. 轧钢机结构耦合振动问题
［J］. 西安冶金建筑学院学报，1994，26（3）：243-248.
Gu L C, Duan Z S. Coupled vibration problem on mills’ structure
［J］. Journal of Xi'an Institute of Metallurgical Construction ＆ Engineering, 1994, 26 (3): 243-248.

［7］张明,彭艳,孙建亮, 等. 2160 mm热连轧机组F2精轧机振动机理及测试
［J］. 钢铁,2016,51(12):103-111.
Zhang M, Peng Y, Sun J L, et al. Vibration mechanism and test of F2 finishing mill of 2160 mm hot strip mill
［J］. Steel, 2016, 51(12): 103-111.

［8］ Sun J L, Peng Y，Guang B. Vertical vibration of moving strip in rolling process based on beam theory
［J］.Chinese Journal of Mechanical Engineering，2009，22(5)：680-687.

［9］魏志恒, 徐海, 朱辰,等. F4轧机工作辊垂扭耦合振动仿真与分析
［J］. 锻压技术, 2016, 41(11):93-97.
Wei Z H, Xu H, Zhu C, et al. Simulation and analysis on the coupling vibration of working roll for mill F4
［J］. Forging & Stamping Technology, 2016, 41 (11): 93-97.

［10］吴炳胜，牛培.基于Adams的冷轧机工作辊振动分析与仿真
［J］.锻压技术，2015, 40(11):159-163.
Wu B S, Niu P. Analysis and simulation of work rolls in cold rolling mill based on Adams
［J］. Forging & Stamping Technology，2015, 40 (11): 159-163.

服务与反馈：

【文章下载】【加入收藏】