锻压技术

四辊轧机垂直振动特性研究及测试分析

英文标题：Research and test analysis on vertical vibration characteristics of four-roller rolling mill

作者：毛君马玉春谢苗

分类号：TH113.1

出版年,卷(期):页码：2018,43(4):105-111

摘要：

为研究四辊轧机系统的垂直振动特性，考虑到四辊轧机具有较复杂的振动过程，建立了四辊轧机非对称6自由度垂直振动模型，利用机械振动学牛顿第二定律理论，构建四辊轧机的垂直振动系统动力学方程。采用Matlab软件对四辊轧机6自由度系统垂直振动模型的固有特性进行理论计算，对系统各阶固有频率及其相应的主振型进行分析，得到了第5阶固有频率是引起四辊轧机强烈自激振动的主要频率。通过现场垂直振动测试平台的验证，表明了该系统垂直振动模型具有较高精度的优点。以上研究结果为研究四辊轧机的现代动态设计、动力学分析以及抑振减振等问题提供了一定的理论基础。

In order to study the vertical vibration characteristics of four-roller rolling mill system, regarding its complicated vibration process, the asymmetric six-degree-of-freedom vertical vibration model of four-roller rolling mill was established, and the dynamics equation of vertical vibration system was established by the Newton′s second law of mechanical vibration theory. Then, the inherent characteristics of six-degree-of-freedom vertical vibration model for four-roller roling mill were calculated by software Matlab, and the natural frequency of each order for the system and the corresponding main vibration mode were analyzed. The results show that the fifth-order natural frequency is the main frequency resulting in the strong self-excited vibration of four-roller rolling mill. The verification of vertical vibration test platform on the scene shows that the above system has the advantage of high accuracy. The above research results provide a theoretical basis for the study of modern dynamic design, dynamic analysis and vibration suppression of four-roller rolling mill.

基金项目：

国家自然科学基金资助项目(51774162)；国家高技术研究发展计划(863计划)资助项目(2013AA06A412)；辽宁省教育厅创新团队资助项目(LT2013009)；辽宁省教育厅重点实验室项目（LJZS006）

毛君(1960-)，男，博士，教授；E-mail：jhl0607@yeah.net；通讯作者：马玉春(1993-)，男，硕士研究生；E-mail：glove0908@126.com

参考文献：

[1]肖云平，刘义伦，周贤. 四辊轧机机座垂直振动仿真与分析[J]. 机械,2008,35(1):17-19.

Xiao Y P, Liu Y L, Zhou X. Simulation and analysis on the vertical vibration of four-high rolling mill stand [J]. Mechanical, 2008, 35(1): 17-19.

[2]马俊，毕长飞. 冷轧机轧制过程中轧辊垂振的研究[J].锻压技术,2016,41(1):57-60.

Ma J, Bi C F. Study on roller vertical vibration in rolling process of cold rolling mill[J]. Forging & Stamping Technology, 2016, 41(1): 57-60.

[3]Younes M A, Shahtout M, Damir M N. A parameters design approach to improve product quality and equipment performance in hot rolling [J].Journal of Materials Processing Technology, 2006, 171 (1):83-92.

[4]侯东晓，陈浩，刘斌，等. 轧机辊系垂直非线性参激振动特性分析[J].振动与冲击,2009,28 (11):1-5.

Hou D X, Chen H, Liu B, et al. Analysis on parametrically excited nonlinear vertical vibration of roller system in rolling mills [J]. Journal of Vibration and Shock, 2009, 28(11):1-5.

[5]王桥医，黄海军，李志华. 金属塑性加工工作界面非稳态润滑轧机振动控制[J].中南大学学报：自然科学版,2010,41(1):1418-1423.

Wang Q Y, Huang H J, Li Z H. Control of mill vibration for unsteady lubrication based on metal-forming processes [J].Journal of Central South University: Science and Technology, 2010, 41(1):1418-1423.

[6]Sun J L, Peng Y, Liu H M, et al. Vertical vibration of moving strip in rolling process based on beam theory [J].Chinese Journal of Mechanical Engineering, 2009, 22(5):680-687.

[7]刘浩然，张莹，时培明，等. 基于动态轧制力的四辊冷轧机七自由度振动特性研究[J].振动与冲击,2015,34(22):98-102+120.

Liu H R, Zhang Y, Shi P M, et al. Vibration characteristics of a cold rolling mill with a model of seven degrees of freedom and their influence on dynamic rolling force [J].Journal of Vibration and Shock, 2015, 34(22):98-102+120.

[8]刘飞，刘彬，刘浩然，等. 轧制力动态特性影响下的轧机辊系振动行为研究[J].中国机械工程,2015, 26(13): 1731-1735+1741.

Liu F, Liu B, Liu H R, et al. Research on vibration behaviors of roll system influenced by dynamic characteristic of rolling force [J].China Mechanical Engineering, 2015, 26 (13): 1731-1735+1741.

[9]马维金，李凤兰，王俊元,等.四辊轧机的六自由度垂直振动模型研究[J].中国机械工程,2011,22(24):2962-2965.

Ma W J, Li F L,Wang J Y,et al. Modeling and validation of vertical vibration with six-degree-of-freedom for 4-high hot strip mill stand [J].China Mechanical Engineering, 2011, 22(24):2962-2965.

[10]曾春. 冷轧平整机轧辊表面振纹产生机理及试验研究[D]. 武汉：武汉理工大学,2010.

Zeng C. Cold Rolling Mill Roll Surface Vibration Pattern and Experimental Study [D]. Wuhan: Wuhan University of Technology, 2010.

[11]鲍文博，白泉，陆海燕. 振动力学基础与MATLAB应用[M].北京：清华大学出版社, 2015.

Bao W B, Bai Q, Lu H Y. Vibration Mechanics Foundation and MATLAB Application [M]. Beijing: Tsinghua University Press, 2015.

[12]Wilson W R D. Friction and lubrication in bulk metal forming processes [J]. Journal of Applied Metal Working, 1979, 1(1):7-9.

[13]陈浩. 轧机辊系非线性垂直振动特性研究[D]. 秦皇岛：燕山大学,2010.

Chen H. Study on Nonlinear Vertical Vibration Characteristics of Rolling Mill Roll [D]. Qinhuangdao: Yanshan University, 2010.

服务与反馈：

【文章下载】【加入收藏】