锻压技术

拉深筋结构参数与约束阻力的回归正交试验

英文标题：Regression orthogonal experiment of drawbead structure parameters and restraining force

作者：李群杨聪邹宗园郭佳

单位：燕山大学

分类号：TG386.32

出版年,卷(期):页码：2018,43(8):35-38

摘要：

利用拉伸筋试验系统，通过回归正交试验的方法对梯形拉深筋结构参数与拉深筋约束阻力的定量关系进行实验研究，建立了梯形拉伸筋结构参数与约束阻力关系的一次线性回归方程，并对回归方程和偏回归系数的显著性进行了F检验，校验了回归方程的准确性；分析了梯形拉伸筋结构对约束阻力的影响规律：凸筋圆角半径、凹槽半径对约束阻力具有显著性影响，筋高对约束阻力影响不显著。用结构参数实际值与板材厚度t的比值替换回归方程中的试验因素，保证了回归方程的通用性,实现了通过回归方程即可根据梯形拉伸筋结构参数预测出板材通过拉深筋时的约束阻力，为冲压模具拉深筋设计提供了基于实验的可靠依据。

The quantitative relationship of trapeziform drawbead structure parameters and drawbead restraining force was studied by the regression orthogonal experiment by using the drawbead test system. The linear regression equation of the relationship between trapeziform drawbead structure parameters and restraining force was established. The F test for significance of the regression equation and partial regression coefficient was carried out to verify the accuracy of the regression equation. The influence law of trapeziform drawbead structure on the restraining force was analyzed. The radius of convex rib round corner and groove have significant effect on the restraining force, while the influence of trapeziform drawbead height is not significant. The generality of the regression equation was ensured by replacing the experimental factors in the regression equation by the ratio of actual values of structural parameters to sheet thickness t. Through the regression equation, the drawbead restraining force when the sheet passed through the drawbead was predicted according to trapeziform drawbead structure parameters, which provided reliable experiment data for the design of stamping die drawbead.

基金项目：

国家自然科学基金资助项目（51475408）；河北省重点研发计划项目(17211911)；秦皇岛市科学技术研究与发展计划项目(201703A013)

李群（1971-），女，博士，副研究员 E-mail：qunli@ysu.edu.cn

参考文献：

［1］肖景容，姜奎华.冲压工艺学
［M］.北京:机械工业出版社，1990.

Xiao J R, Jiang K H. Stamping Technology
［M］. Beijing:China Machine Press, 1990.

［2］Demeri M Y. Drawbeads in sheet metal forming
［J］.Journal of Materials Engineering and Performance, 1993, 2(6): 863-866.

［3］Samuel M. Influence of drawbead geometry on sheet metal forming
［J］. Journal of Materials Processing Technology, 2002,122(1):94-103.

［4］Chung Y C. Geometric modelling of drawbeads using vertical section sweeping
［J］.Computer-Aided Design, 2013，(45):1556-1561.

［5］Weidemann C. The blankholder action of drawbeads
［A］. Proceedings of 10th Biennial IDDRG Congress
［C］. UK: University of Warwick,1978.

［6］史东才，刘建寿.梯形拉深筋等效约束阻力模型研究
［J］.模具工业, 2012, 38(3): 28-30.

Shi D C, Liu J S. Equivalent constraint force model of trapezoid drawbead
［J］.Die & Mould Industry,2012, 38(3): 28-30.

［7］易国锋.汽车覆盖件冲压成形精细化仿真与优化技术研究
［D］.武汉:华中科技大学,2012.

Yi G F. Study on Fine Simulation and Optimization Techniques for Auto Panel Forming Processer
［D］. Wuhan:Huazhong University of Science and Technology,2012.

［8］罗仁平，贺亮，罗家兵，等.基于试验的等效拉深筋阻力及几何参数修正
［J］.模具技术,2015,（4）:14-18.

Luo R P, He L, Luo J B,et al. Modification of equivalent drawbead restraining force and geometric parameters based on experimental date
［J］. Die and Mould Technology, 2015, （4）:14-18.

［9］殷忠晴.拉深筋结构参数对高强钢板后续成形性能影响试验研究
［D］. 秦皇岛:燕山大学,2016.

Yin Z Q. Experimental Study on How the Structural Parameters of Drawbead Impacting on the Subsequent Forming Properties of High Strength Steel Plates
［D］.Qinhuangdao:Yanshan University,2016.

［10］彭必友，胡腾，肖兵，等. 基于数值模拟的拉延筋约束阻力计算方法研究
［J］.锻压技术,2009,34(6):70-73.

Peng B Y, Hu T, Xiao B,et al. Research on calculation method of the drawbead restraining force based on simulation
［J］. Forging & Stamping Technology,2009,34(6):70-73.

［11］金淼，郭宝峰，吴晓涛.基于数值模拟的拉深筋结构参数离散优化
［J］.塑性工程学报,2009,16(2):15-18.

Jin M, Guo B F, Wu X T.The drawbead geometrical parameter discrete optimization based on FE analysis
［J］.Journal of Plasticity Engineering,2009,16(2):15-18.

［12］李云雁, 胡传荣.试验设计与数据处理
［M］.北京:化学工业出版社,2005.

Li Y Y, Hu C R. Experimental Design and Data Processing
［M］. Beijing: Chemical Industry Press, 2005.

服务与反馈：

【文章下载】【加入收藏】