锻压技术

渐进成形工艺参数对6061铝合金板材成形性能的影响

英文标题：Effect of incremental forming process parameters on formability of 6061 aluminum alloy sheet

作者：王新太王进顾宁王旭孙树峰

单位：青岛理工大学

分类号：TG386

出版年,卷(期):页码：2019,44(7):29-33

摘要：

采用普通单点渐进成形技术探究工艺参数对6061铝合金板材成形性能的影响。运用正交实验法，探讨Z轴层进给量、进给速度、工具头直径、润滑方式这4种工艺参数对6061铝合金板材成形性能的影响，并结合极差分析与方差分析，研究4种工艺参数对成形极限角的影响顺序及成形性能的显著影响水平。实验结果表明：工具头直径是影响6061铝合金板材成形性能的最大因素，其次依次为润滑方式、进给速度、Z轴层进给量。由极差分析得出一组最优参数组合为A2B2C1D3，其最大成形极限角为82.78°。由方差分析可知，4种工艺参数中对成形性能影响显著的是工具头直径，与极差分析结果一致。

The effect of process parameters on the formability of 6061 aluminum alloy sheet was investigated by the ordinary single-point incremental forming technology. The orthogonal experiment method was used to investigate the effects of four process parameters such as Z-axis layer feeding amount, feeding speed, tool head diameter and lubrication method on the formability of 6061 aluminum alloy sheet. Combining the range analysis and variance analysis, the influence order of the four process parameters on the forming limit angle and the significant influence level of formability were studied. The results show that the tool head diameter is the biggest factor affecting the formability of 6061 aluminum alloy sheet, followed by the lubrication method, feeding speed and Z-axis layer feeding amount. From the range analysis, a set of optimal parameter combination of A2B2C1D3 is obtained, and the maximum forming limit angle is 82.78°. From the variance analysis, it is known that the tool head diameter has a significant influence on the formability among the four process parameters. This result is consistent with the range analysis result.

基金项目：

国家自然科学基金资助项目（51205217，51775289）；山东省自然科学基金资助项目（ZR2018ZB0524）

王新太（1993-），男，硕士，E-mail：704079084@qq.com；通讯作者：王进（1978-），男，博士，副教授，E-mail：jinwangqtech@163.com

参考文献：

[1]文怀兴, 雷奇红, 史鹏涛, 等. 基于正交试验的加工参数对成形精度的影响[J]. 热加工工艺, 2016, 45(17): 132-134.

Wen H X, Lei Q H, Shi P T, et al. Influence of processing parameters on forming precision based on orthogonal test [J]. Hot Working Technology, 2016, 45(17): 132-134.

[2]杨林，郝艳君，马春艳，等. 热处理对挤压态6061铝合金低周疲劳行为的影响[J]. 沈阳工业大学学报, 2010, 32(5): 496-500.

Yang L, Hao Y J, Ma C Y, et al. Influence of heat treatment on low cycle fatigue behavior of extruded 6061 aluminum alloy.[J]. Journal of Shenyang University of Technology, 2010, 32(5): 496-500.

[3]邓伟林, 冯可芹, 王均, 等. 挤压比对 6061 铝合金耐腐蚀性能的影响[J]. 四川大学学报：工程科学版, 2012, 44 (S1): 291-296.

Deng W L, Feng K Q, Wang J,et al. Effect of extrusion ratio on the corrosion resistance of 6061 aluminum alloy [J]. Journal of Sichuan University: Engineering Science Edition, 2012, 44 (S1): 291-296.

[4]Buffa G, Fratini L, Micari F, et al. Material flow in FSW of T-joints: Experimental and numerical analysis[J]. International Journal of Material Forming, 2008, 1(1): 1283-1286.

[5]孙成智，罗思东，王东川，等. 变压边力对铝合金板冲压成形的影响研究[J]. 塑性工程学报, 2005, 12(3): 41-45.

Sun C Z, Luo S D, Wang D C, et al. Mechanism investigation of variable blank-holder forces improving the formability of aluminum alloy sheets during sheet metal forming[J]. Journal of Plasticity Engineering, 2005, 12(3): 41-45.

[6]郭亮, 湛利华. 6061-T6铝合金板材热冲压成形极限图研究[J]. 热加工工艺, 2017, 46 (5): 131-134.

Guo L, Zhan L H. Study on forming limit diagram of hot stamping of 6061-T6 aluminum alloy sheet[J]. Hot Working Technology, 2017, 46 (5): 131-134.

[7]Luo Y X, He K, Du R X. Investigations on the formability of incremental punching process[J]. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2011, 5(4): 227-239.

[8]Luo Y X, He K, Du R X. A new sheet metal forming system based on the incremental punching, Part 1: Modeling and simulation[J]. The International Journal of Advanced Manufacturing Technology, 2010, 51(5-8): 481-491.

[9]李丽华. 搅拌摩擦渐进成形中板料局部温升特性研究[D]. 青岛：青岛科技大学, 2016.

Li L H. Study on Local Temperature Rise Characteristic of Sheet Metal in Friction Stir Incremental Sheet Forming[D]. Qingdao: Qingdao University of Science & Technology, 2016.

[10]姜虎森，王旭，张志刚，等. 波动加工轨迹驱动的板料锤击渐进成形时间研究[J]. 锻压技术，2017，42（11）：89-93.

Jiang H S，Wang X，Zhang Z G，et al. Study on incremental punching time driven by wave tool path for sheet metal [J]. Forging & Stamping Technology，2017，42（11）：89-93 .

[11]Young D. Formability in Computer Numerically Controlled Single Point Incremental Forming [D]. Canada: Queens University, 2003.

[12]Jeswiet J, Micari F, Hirt G, et al. Asymmetric single point incremental forming of sheet metal[J]. CIRP Annals-manufacturing Technology, 2005, 54(2): 88-114.

[13]Kim Y H, Park J J. Effect of process parameters on formability in incremental forming of sheet metal[J]. Journal of Materials Processing Technology, 2002, 130: 42-46.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】