锻压技术

基于全息锥光的钛合金精锻叶片精密测量规划方法

英文标题：Accuracy measurement planning method for titanium alloy precision forging blade based on holographic cone light

作者：何万涛邵光保郭延艳王磊孟祥丽

分类号：TH741

出版年,卷(期):页码：2019,44(12):139-145

摘要：

为提高采用全息锥光传感器测量复杂钛合金锻造叶片的精度和前后缘位置的数据密度，提出了一种复杂钛合金叶片测量路径规划方法。在介绍了叶片截面型线上的关键点概念的基础上，利用三次有理样条函数对叶片截面型线的最大厚度和中弧线进行计算，获得了前缘点、后缘点和最大内切圆交点等8个关键点。利用8个关键点对截面型线进行了分割与延拓处理，进而提出了双向自适应路径规划方法。提出的方法在开发的四轴精密叶片测量设备上进行了应用，并通过实验验证了该方法的可行性与有效性。实验结果表明，所提出的方法可为精锻叶片自适应加工提供高精度的三维重构数据。

In order to improve the accuracy of measuring complex titanium alloy forging blades and the data density of front and rear edge positions with the holographic cone light sensor, a method of measuring path planning for complex titanium alloy blades was proposed. Based on the introduction of the concept of key points on the blade section line, the maximum thickness and the middle arc of the blade section line were calculated by using the cubic rational spline function, and eight key points such as leading edge point, trailing edge point and intersection of the maximum inscribed circle were obtained. Furthermore, the eight key points were used to segment and extend the section lines, and then a bi-directional adaptive path planning method was proposed. The proposed method was applied to the developed four-axis precision blade measuring equipment, and the feasibility and effectiveness of the method were verified by experiments. The experimental results show that the proposed method can provide high-precision 3D reconstruction data for adaptive machining of precision forging blades.

基金项目：

国家自然科学基金资助项目(51675165,51505134)

何万涛（1981-），男，博士，工程师 E-mail：hewantao1225@163.com 通讯作者：郭延艳（1982-），女，硕士，讲师 E-mail：gyyhist@163.com

参考文献：

［1］Li W, Xie H, Zhang G, et al. 3-D shape matching of a blade surface in robotic grinding applications
［J］. IEEE/ASME Transactions on Mechatronics, 2016, 21(5): 2294-2306.

［2］李淼泉, 李浩放, 熊爱明, 等. 带阻尼台TC6钛合金叶片精密锻造
［J］. 锻压技术, 2018，43(7):96-102.

Li M Q, Li H F, Xiong A M, et al. Precision forging of TC6 titanium alloy blade with damping
［J］. Forging & Stamping Technology, 2018，43(7)：96-102.

［3］王晓颖. TA11钛合金转子叶片小余量锻造工艺研究
［D］. 哈尔滨：哈尔滨工业大学，2017.

Wang X Y. Study on Small Allowance Forging Process of TA11 Rotor Blade
［D］. Harbin：Harbin Institute of Technology, 2017.

［4］陈园源, 周卫涛. 精锻叶片数字化自适应加工质量控制研究
［J］. 航空制造技术, 2018, 61(6): 94-97.

Chen Y Y, Zhou W T. Research on digital self-adaptive processing quality control of precision forging blade
［J］. Aeronautical Manufacturing Technology, 2018, 61(6): 94-97.

［5］任军学, 冯亚洲, 米翔畅,等. 航空发动机精锻叶片自适应数控加工技术
［J］. 航空制造技术, 2015, 58(22):52-55.

Ren J X, Feng Y Z, Mi X C,et al. Adaptive techniques in CNC machining of aeroengine precision forging blades
［J］. Aeronautical Manufacturing Technology, 2015, 58(22): 52-55.

［6］王淼安. 光学测头在飞机发动机叶片检测中的应用
［J］. 航空制造技术, 2010，53(13):32-35.

Wang M A. Application of optical probe in aircraft engine blade inspection
［J］. Aeronautical Manufacturing Technology, 2010,53 (13): 32-35.

［7］周阿维, 邵伟, 吴莹. 应用锥光偏振全息技术的航空叶片测量新方法
［J］. 中国机械工程, 2017,28(12): 1394-1399.

Zhou A W, Shao W, Wu Y. A new method of aviation blade measurement via applications of conoscopic holography principle
［J］. China Mechanical Engineering, 2017,28(12): 1394-1399.

［8］Srivatsan V, Katz R, Dutta D. Fixtureless sensor standoff control for high-precision dimensional inspection of freeform parts
［J］. Journal of Manufacturing Science and Engineering, 2007,129:172-179.

［9］王福海. 航空叶片激光扫描测量规划与适应性修形技术研究
［D］. 南京：南京航空航天大学, 2016.

Wang F H. Research on Measurement Planning of Laser-scanning and Adaptive Geometric Modification for Aero-engine Blades
［D］. Nanjing: Nanjing University of Aeronautics and Astronautics,2016.

［10］Park H, Jung H B, Kim K. A new approach for lofted B-spline surface interpolation to serial contours
［J］. The International Journal of Advanced Manufacturing Technology, 2004, 23(5):39-41.

［11］Habermann C, Kindermann F. Multidimensional spline interpolation: Theory and applications
［J］. Computational Economics, 2007, 30(2): 153-169.

［12］张力宁, 张定华, 陈志强. 基于等距线的叶片截面中弧线计算方法
［J］. 机械设计, 2006，23(5): 39-41.

Zhang L N, Zhang D H, Chen Z Q. Calculation method on central arced curve of blade section based on equidistance line
［J］. Journal of Machine Design,2006,23(5):39-41.

服务与反馈：

【文章下载】【加入收藏】