锻压技术

板料弯曲载荷测试用压电式探针测力传感器设计

英文标题：Design on piezoelectric probe force sensor to test sheet bending load

单位：上海工程技术大学

分类号：TG3;TH12;TH87

出版年,卷(期):页码：2020,45(1):156-161

摘要：

在弯曲模具成形板料的载荷测试中，普通传感器因信噪比不高、测试空间狭小而可能产生功能失效。根据金属在塑性成形时的应力分布规律，设计了一种压电式探针测力传感器，当探针的一端受到板料弯曲变形对其的挤压作用时，产生的应力沿探针轴向传播，通过测量探针所受载荷，可得到整板的弯曲成形力。为了检验压电式探针测力传感器的性能，特别设计了一副弯曲组合模具，并将压电式探针测力传感器倾斜安装在模具型腔中，测试板料在弯曲成形中所受载荷，经反复试验，并将测试结果与经验公式计算结果进行比对，测试偏差在可接受范围内，结果证明传感器性能是稳定可靠的。

In the load test of sheet metal formed by bending die, the ordinary sensor may have a functional failure due to the low signal\|noise ratio and the narrow test space. According to the stress distribution law of metal plastic forming, a piezoelectric probe force sensor was designed. When one end of the probe was subjected to the squeezing action of the sheet bending deformation, the generated stress propagated along the axial direction of the probe, and the bending force of the entire plate was obtained by measuring the load on the probe. In order to verify the performance of the piezoelectric probe force sensor, the bending combined die was specially designed, and the piezoelectric probe force sensor was installed obliquely in the die cavity to test the load of the sheet during bending. After repeated trials, the test results were compared with the empirical formula calculation results, and the test deviation was within the acceptable range. The result shows that the performance of sensor is stable and reliable.

基金项目：

校级项目基金资助项目（19KY0502）

李孟祥（1993-），男，硕士研究生 E-mail：1327955992@qq.com 通讯作者：龚红英（1974-），女，博士，教授 E-mail：ghyyw@163.com

参考文献：

[1]韩飞,牛丽丽,王允.超高强钢辊弯成形回弹机理分析及控制研究[J].机械工程学报,2018,54(2):131-137.

Han F, Niu L L, Wang Y. Research on springback mechanism and control of ultra high strength steel in roll forming process[J]. Journal of Mechanical Engineering,2018,54(2):131-137.

[2]靳淇超,汪文虎,蒋睿嵩.压气机叶片辊轧模具型腔回弹补偿方法研究[J].机械工程学报,2017,53(16):148-155.

Jin Q C, Wang W H, Jiang R S, et al. Investigation on springback compensation method for the rolling mold of compressor blade [J]. Journal of Mechanical Engineering, 2017, 53(16):148-155.

[3]赵茂俞,郝梦雨,郭宏宇,等.变形应力对弯曲回弹角的影响[J].锻压技术,2019,44(3):24-28.

Zhao M Y, Hao M Y,Guo H Y,et al. Influence of deformation stress on bending springback angle [J].Forging & Stamping Technology, 2019,44(3):24-28.

[4]龚志辉,李光耀,钟志华.基于仿真误差补偿模型的回弹补偿新方法[J].中国机械工程,2008，(11):1358-1362.

Gong Z H, Li G Y, Zhong Z H. A new algorithm for springback compensation based on simulation error compensation model [J].China Mechanical Engineering, 2008，(11):1358-1362.

[5]肖景容, 姜奎华. 冲压工艺学[M ] .北京:机械工业出版社, 1999.

Xiao J R, Jiang K H. Stamping Technology [M]. Beijing: China Machine Press, 1999.

[6]王孝培.冲压手册
［M］.第2版. 北京:机械工业出版社, 1990.

Wang X P. Stamping Handbook [M]. The 2nd Editor. Beijing: China Machine Press,1990.

[7]周勇,卢险峰,杨雪春.U形件自由弯曲力理论计算新模型[J].南昌大学学报：工科版,2009,31(3):299-303.

Zhou Y, Lu X F, Yang X C. A new theoretical calculation model on U|shaped bending force[J].Journal of Nanchang University：Engineering & Technology,2009,31(3):299-303.

[8]叶泽刚.板料V形自由弯曲力的工程算法[J].中国机械工程,2006,(S1):60-62.

Ye Z G. Engineering calculation of air bending force for sheet metal V shape [J].China Mechanical Engineering,2006, (S1):60-62.

[9]官英平,赵军,苏春建.宽板V型自由弯曲智能化控制过程的解析定量描述[J].塑性工程学报,2005,12(2):30-33,72.

Guan Y P, Zhao J, Su C J. Analytic description of intelligent control of V shap free bending of wide sheet metal[J].Journal of Plasticity Engineering,2005,12(2):30-33,72.

[10]秦泗吉,胡福泰,李硕本.U形件自由弯曲力的计算及影响因素分析[J].塑性工程学报,1998,5(1):35-40.

Qin S J, Hu F T, Li S B. Calculation of free bending for U type parts and analysis of influence factors
［J］. Journal of Plasticity Engineering,1998,5(1):35-40.

[11]赵彦启,闵乃燕,杨青春.直角形弯曲的变形分析与回弹计算[J].塑性工程学报,1996,3(1):38-43.

Zhao Y Q, Min N Y, Yang Q C. Research on deformation and springback of sheet under rectangular bending[J].Journal of Plasticity Engineering,1996,3(1):38-43.

[12]王锋,宋永伦,张军,等.MEMS压力传感器在电阻点焊压力测试中的应用[J].焊接,2008,(2):38-40,71.

Wang F, Song Y L, Zhang J, et al. Application of MEMS pressure sensor to measuring electrode force of resistance spot welding[J].Welding & Joining,2008,(2):38-40,71.

[13]林鹏,王肖钧,彭常贤.压电式传感器在辐射冲击波测量中的应用[J].传感器技术,2005,(6):69-71.

Lin P, Wang X J, Peng C X. Application of piezoelectric transducer in shock waves induced by irradiation[J].Transducer and Microsystem Technologies,2005,(6):69-71.

[14]王伟忠,赵玉龙,林启敬.MEMS三维微力探针传感器设计及性能测试[J].纳米技术与精密工程,2011,9(3):199-202.

Wang W Z, Zhao Y L, Lin Q J. Design and performance test of MEMS tri|axial micro|force probe sensor[J].Nanotechnology and Precision Engineering,2011,9(3):199-202.

[15]胡永乐,林俊德,金飞华,等.应变式压杆压力传感器在冲击波载荷测试中的应用[J].实验力学,2006,(5):547-552.

Hu Y L, Lin J D, Jin F H, et al. Strain type pressure rod gauge used for measuring blast loading[J].Journal of Experimental Mechanics,2006,(5):547-552.

服务与反馈：

【文章下载】【加入收藏】