锻压技术

脉冲电流对6016-T4铝合金板材力学性能的影响

英文标题：Influence of pulse current on mechanical properties for 6016-T4 aluminum alloy sheet

作者：张赛军李康镇路艳春沈朝辉

单位：华南理工大学

分类号：TG115.5; TH142.2

出版年,卷(期):页码：2020,45(1):173-178

摘要：

为研究在电流辅助成形时脉冲电流的电流密度、占空比和脉冲频率3个因素对6016-T4铝合金板材力学性能的影响规律，设计了3因素5水平的正交实验。实验表明，对6016-T4铝合金力学性能影响的主次因素是：电流密度>占空比>脉冲频率。在此基础上，选用主次2个因素,即电流密度和脉冲频率，使用控制变量法进行进一步的实验研究。实验结果表明，电流密度对6016-T4铝合金力学性能影响较大，改变电流密度的同时带来了明显的焦耳热效应，该效应对材料有明显的软化作用，降低了材料的流动应力，但是，同时也降低了铝合金板的伸长率，这是因为过大的电流密度加剧了试样的主应变演化，进而促进了试样的断裂。而脉冲频率的变化对6016-T4铝合金板材的力学性能影响很小，这也印证了正交实验的结论。

In order to study the influences of three factors of pulse current density, duty cycle and pulse frequency on the mechanical properties of 6016-T4 aluminum alloy sheet in current assisted forming, an orthogonal experiment was designed with three factors and five levels. The experimental results show that the main and the secondary factors influencing the mechanical properties of 6016-T4 aluminum alloy are current density > duty cycle > pulse frequency. On this basis, two factors of current density and pulse frequency were selected for further experimental research with control variable method. The experimental results show that the current density has a great influence on the mechanical properties of 6016-T4 aluminum alloy. The change of current density brings about an obvious joule thermal effect, which has a significant softening effect on the material and reduces the flow stress of the material. The elongation of the aluminum alloy sheet is also reduced at the same time, because excessive current density aggravates the evolution of the main strain for specimens and promots the fracture of the specimens. However, the change of pulse frequency has little effect on the mechanical properties of 6016-T4 aluminum alloy sheet to confirm the conclusion of orthogonal experiment.

基金项目：

广东省自然科学基金资助项目 (2016A030313453)

张赛军(1978-)，男，博士，副教授 E-mail:mesjzhang@scut.edu.cn

参考文献：

[1]Klusemann B, Fischer G, Bhlke T, et al. Thermo-mechanical characterization of Portevin-Le Chatelier bands in AlMg3 (AA5754) and modeling based on a modified Estrin-McCormick approach [J]. International Journal of Plasticity, 2015, 67: 192-216.

[2]Nguyen-Tran H D, Oh H S, Hong S T, et al. A review of electrically-assisted manufacturing [J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2015, 2 (4): 365-376.

[3]Troitskii O A, Likhtman V I. The anisotropy of the action of electron and γ-radiation on the deformation of zinc single crystals in the brittle state [J]. Soviet Physics Doklady, 1963, 8: 91.

[4]Troitskii O A. Effect of the electron state of a metal on its mechanical properties and the phenomenon of electroplasticity [J]. Strength of Materials, 1977, 9 (1): 35-45.

[5]Troitskii O A, Moiseenko M M. Electroplastic deformation of zinc, cadmium and lead crystals [J]. Russian Metallurgy, 1987, 23 (11): 159-161.

[6]Roh J H, Seo J J, Hong S T, et al. The mechanical behavior of 5052-H32 aluminum alloys under a pulsed electric current [J]. International Journal of Plasticity, 2014, 58: 84-99.

[7]王建华, 毛佳新, 靳凯, 等. TA2纯钛构件电流辅助旋压成形实验研究[J]. 精密成形工程, 2018, 10 (4): 61-67.

Wang J H, Mao J X, Jin K, et al. Experimental research on current-assisted spin-forming of TA2 pure titanium components [J]. Journal of Netshape Forming Engineering, 2018, 10 (4): 61-67.

[8]霭振球, 闫磊, 董湘怀. AZ31镁合金与DP980高强钢的纯电塑性效应实验研究 [J]. 热加工工艺, 2015, 44 (4): 31-36.

Ai Z Q，Yan L，Dong X H. Study on pure electroplastic effect of AZ31 alloy and DP980 AHSS [J]. Hot Working Technology, 2015, 44 (4): 31-36.

[9]Salandro W A, Bunget C, Mears L. Electroplastic modeling of bending stainless steel sheet metal using energy methods [J]. Journal of Manufacturing Science and Engineering, 2011, 133 (4): 66-76.

[10]江双双, 汤泽军, 杜浩, 等. 钛合金电流辅助成形工艺研究进展 [J]. 精密成形工程, 2017,9 (2): 7-13.

Jiang S S, Tang Z J, Du H, et al. Research progress of the forming process of titanium alloy assisted by current [J]. Journal of Netshape Forming Engineering, 2017, 9(2): 7-13.

[11]王国峰, 李骁, 李丹峰, 等. 脉冲电流在塑性加工中的应用[J].航空制造技术, 2017, (18): 22-28.

Wang G F, Li X, Li D F, et al. Application of pulse electric current in the field of plastic processing [J]. Aeronautical Manufacturing Technology, 2017, (18): 22-28.

[12]ASTM E8-E8M-16a, Standard test methods for tension testing of metallic materials [S].

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】