锻压技术

铁道车辆热铆连接的有限元分析

英文标题：Finite element analysis on hot riveting connection for railway vehicles

作者：徐德衍

分类号：U270.3

出版年,卷(期):页码：2020,45(2):118-128

摘要：

为了进一步研究铁道车辆热铆连接过程，基于热固耦合有限元理论建立铆钉和铆接件的有限元模型，模拟热铆连接过程，并结合试验进行验证。将热铆连接变形过程分为6个阶段，分析铆钉在热铆连接过程中的受力和变形情况，并通过改变铆钉钉杆长度和镦头高度，分析不同参数对热铆连接的影响，并得到最佳热铆参数。结果表明：铆钉的最大应力集中在铆钉镦头和与铆接件边缘相接触的中心部位，最大应变集中在镦头靠近铆接件边缘的位置；钉杆长度小于一定值时，铆钉的最大应力均发生在铆钉镦头顶部和镦头与铆接件边缘相接触的中心部位，超过该值时，应力集中位置只出现在铆钉镦头顶部；铆钉的最大应力随镦头高度总体呈下降趋势。

In order to study the hot riveting connection process of railway vehicles further, the finite element models of rivets and riveting parts were established based on the thermal-solid coupling finite element theory, and the hot riveting connection process was simulated and verified by experiments. Then, the deformation process of hot riveting connection was divided into six stages, and the force and deformation of rivet during the hot riveting connection process were analyzed. By changing the length of rivet rod and height of rivet head, the influences of different parameters on the hot riveting connection were analyzed, and the optimum hot riveting parameters were obtained. The results show that the maximum stress of the rivet is concentrated in the center of the contact area for the rivet head and the edge of riveting part, and the maximum strain is concentrated at the position of the rivet head near the edge of riveting part. When the length of rivet rod is less than a certain value, the maximum stress of the rivet occurs at the top of the rivet head and in the center of the contact area for the rivet head and the edge of riveting part. While the length of rivet rod exceeds this value, the stress concentration position appears only at the top of the rivet head, and the maximum stress of the rivet decreases with the increasing of the height of rivet head generally.

基金项目：

国家自然科学基金资助项目 (11732014,11462011)

徐德衍 (1980-)，男，学士，副高工，E-mail：xdy_xzy@163.com

参考文献：

[1]严隽耄, 傅茂海. 车辆工程[M].第3版.北京：中国铁道出版社,2008.
Yan J M, Fu M H. Vehicle Engineering[M]. The 3rd Edition. Beijing: China Railway Publishing House, 2008.
[2]刘平.铆接变形及其有限元分析[D].西安：西北工业大学,2007.
Liu P. Rivet Deformation and Its FE Analysis [D]. Xi′an: Northwestern Polytechnical University, 2007.
[3]金立翡.动车铆钉焊缝连接件强度的有限元分析[D]. 大连：大连理工大学,2013.
Jin L F. Finite Element Analysis on Strength of Weld and Rivet in High Speed Train [D]. Dalian: Dalian University of Technology, 2013.
[4]王永岩,张向峰,闫蕾蕾,等.机车车辆Huck铆钉铆接件疲劳试验分析[J].石家庄铁道大学学报:自然科学版,2017,30(2):63-67.
Wang Y Y, Zhang X F, Yan L L, et al. Fatigue test analysis of Huck rivets and rivets of rolling stock [J]. Journal of Shijiazhuang Railway University:Natural Science Edition, 2017, 30 (2): 63-67.
[5]周琦.基于数值模拟的铝合金板料自冲铆接成形[J].锻压技术, 2019,44(7):47-51.
Zhou Q. Self-pierce riveting of aluminum alloy sheet based on numerical simulation[J]. Forging & Stamping Technology, 2019, 44(7):47-51.
[6]徐利利,汪彬,陈光权,等.基于有限元模拟的自冲铆接工艺参数优化[J].汽车工程学报,2019,9(3):175-181.
Xu L L, Wang B, Chen G Q, et al. Parameter optimization of self-piercing riveting process based on numerical simulation [J]. Journal of Automotive Engineering, 2019, 9(3):175-181.
[7]Wei X, You W, Li X P, et al. Study on the forming process and deformation behavior of inner ring in the wheel hub bearing based on riveting assembly[J]. Materials (Basel, Switzerland), 2019, 12(22), 3785, https://doi.org/10.3390/ma12223785.
[8]Jiang H, Cong Y J, Zhang J S, et al. Fatigue response of electromagnetic riveted joints with different rivet dies subjected to pull-out loading[J]. International Journal of Fatigue, 2019, 129,105238, https://doi.org/10.1016/j.ijfatigue.2019.105238.
[9]李艳,于克杰,李小雷.铆钉材料对铆接变形影响的有限元分析[J].机床与液压,2013,41(4):50-52.
Li Y, Yu K J, Li X L. Finite element analysis for the influence of rivet materials on rivet deformation [J].Machine Tool & Hydraulics, 2013, 41(4):50-52.
[10]冯晓旻,谢兰生.铆接变形的有限元分析[J].机械制造与自动化,2009,38(2):62-63,80.
Feng X M, Xie L S. Rivet deformation and finite element analysis [J]. Machine Building & Automation, 2009, 38(2): 62-63, 80.
[11]屈力刚,高岩,李静,等.基于ABAQUS的斜面铆接变形的模拟分析[J].机床与液压,2018,46(23):172-176.
Qu L G, Gao Y, Li J, et al. Simulation analysis of oblique riveted deformation based on ABAQUS[J].Machine Tool & Hydraulics,2018,46(23):172-176.
[12]张天朋. 铆接角度与方向对连接件疲劳性能的影响[D].杭州：浙江大学,2017.
Zhang T P. Influence of Riveting Angle and Direction on Fatigue Performance of Connecting Piece[D].Hangzhou: Zhejiang University, 2017.

服务与反馈：

【文章下载】【加入收藏】