锻压技术

冷连轧机支撑辊的辊形优化设计

英文标题：Optimization design on backup roll contour for cold tandem rolling mill

作者：季业益陆宝山关集俱李强伟

分类号：TG335

出版年,卷(期):页码：2020,45(11):150-155

摘要：

结合影响函数法与条元变分法，开发出轧制过程中辊系及带材变形的模拟工具，并以此工具为基础，优化设计支撑辊的端部辊形，将端部辊形设计成幂函数曲线，并考察幂函数曲线的3个主要参数对带材边部减薄量及前张力差值的影响，最终确定幂函数曲线的最佳参数组合为：xL=250 mm、ΔR=4.0 mm、α=0.2。为确认该端部支撑辊的实际应用效果，将此支撑辊置于五机架冷连轧机的第4机架中，并用实际生产数据进行计算模拟与实验验证。结果显示：与平端支撑辊相比，使用具有端部曲线的支撑辊，不但能改善厚薄差及板形，同时可以大幅降低工作辊的弯辊力，并有利于轧机操作的稳定性。

Combining with the influence function method and the strip element variation method, the simulation tool of roll system and strip deformation in the rolling process was developed, and the end contour of backup roll was optimized and designed as the power function curve based on the above tool. Then, the influences of three main parameters for the power function curve on the strip edge thinning amount and the front tension difference were investigated, and the best parameter combination of power function curve was determined as follows: xL=250 mm, ΔR=4.0 mm, α=0.2. Furthermore, in order to confirm the actual use effect of the backup roll, it was placed in the fourth-stand of the cold tandem rolling mill five-stands, and the actual production data were used for computational simulation and experimental verification. The results show that compared with the flat end backup roll, using the backup roll with curved end cannot only improve the thickness difference and the plate shape, but also greatly reduce the bending force of work roll and facilitate the stability of rolling mill operation.

基金项目：

国家自然科学基金青年基金资助项目（51805345）；江苏省自然科学基金青年基金项目（BK20170373）；江苏高校“青蓝工程”资助项目（2019）；苏州市重点实验室资助项目（SZS201815）

季业益(1980-)，男，硕士，副教授 E-mail：00314@siit.edu.cn

参考文献：

[1]鲁海涛, 曹建国, 张杰, 等. 冷连轧机变接触支承辊板形控制性能研究与应用[J]. 钢铁, 2007, 42(5): 42-46.

Lu H T，Cao J G, Zhang J, et al. Research and application of roller shape control for cold rolling mill [J]. Iron & Steel, 2007, 42(5): 42-46.

[2]Jiang Z Y, Du X Z, Du Y B, et al. Strip shape analysis of asymmetrical cold rolling of thin strip [J]. Advanced Materials Research, 2010, 97-101: 81-84.

[3]Yang G H, Zhang J, Li H B, et al. Taper roll contour design for edge drop control of nonoriented electrical steel on tandem cold rolling mill [J]. Applied Mechanics and Materials, 2012, 166-169: 670-673.

[4]吴彬, 张清东, 张晓峰. 冷连轧机辊型配置对高强钢板形控制的影响[J]. 轧钢, 2012, 29(1): 24-26.

Wu B，Zhang Q D，Zhang X F. Effect of roller configuration on control of high strength steel sheet [J]. Steel Rolling, 2012,29(1): 24-26.

[5]连家创，戚向东. 板带轧制理论与板形控制理论[M]. 北京：机械工业出版社, 2013.

Lian J C, Qi X D. Strip Rolling and Shape Control Theory [M]. Beijing: China Machine Press, 2013.

[6]刘光明. 双机架可逆四辊冷轧机轧制特性及板形控制特性研究[D]. 沈阳：东北大学, 2010.

Liu G M. Study on Rolling Characteristics and Shape Control Characteristics of Reversible Fourroll Cold Rolling Mill with Double Frame [D]. Shenyang: Northeastern University, 2010.

[7]戚向东, 连家创. 考虑轧件弹性变形时冷轧薄板轧制压力分布的精确求解[J]. 重型机械, 2001，49(5): 41-44.

Qi X D, Lian J C. Accurate solution of rolling pressure distribution of cold rolled sheet when considering elastic deformation [J]. Heavy Machinery, 2001, 49(5): 41-44.

[8]Liu H M, Lian J C. Third power Bspline finite strip method analyzing the 3-dimensional stresses and deformations of cold strip rolling [A]. Xu B Y, Yang W. Advances in Engineering Plasticity & Its Applications [C]. Beijing: International Academic Publishers, 1993.

[9]Wang D C, Liu H M. A model coupling method for shape prediction [J]. Journal of Iron and Steel Research, International, 2012, 19(2): 22-27.

10]董永刚，苏玉龙，张岩岩. 配备组合式支承辊的四辊冷轧机辊系弹性变形数学模型[J]. 中南大学学报：自然科学版，2013, 44(6): 2298-2303.

Dong Y G, Su Y L, Zhang Y Y. Mathematical model of elastic deformation of cold reduction mill equipped with composite backup roll[J]. Journal of Central South University:Science and Technology, 2013, 44(6): 2298-2303.

[11]孙大乐, 赵建国. 宽带钢轧机支承辊辊形优化设计[J]. 钢铁, 2011, 46(4): 45-48.

Sun D L, Zhao J G. Optimum design on profile of backup roll used for wide strip mill [J]. Iron & Steel, 2011, 46(4): 45-48.

[12]王东城, 马庆龙, 刘宏民. 冷轧带钢平整机支撑辊辊型优化技术的研究[J]. 钢铁, 2009,44(8): 59-62.

Wang D C, Ma Q L, Liu H M. Study of backup roll contour optimization for cold strip temper rolling mill [J]. Iron & Steel, 2009, 44(8): 59-62.

服务与反馈：

【文章下载】【加入收藏】