锻压技术

采用均匀压力线圈的铝合金曲面零件电磁校形

英文标题：Electromagnetic sizing for aluminium alloy curved surface part by uniform pressure coils

作者：梅龙刘维邹希凡黄尚宇

分类号：TG391

出版年,卷(期):页码：2020,45(9):118-122

摘要：

回弹是铝合金板料成形工艺中不可避免的问题之一，直接影响到铝合金零件的成形精度。根据铝合金曲面零件的形状特征，采用具有3D随形结构的均匀压力线圈进行电磁校形，运用全过程多物理场耦合数值模拟方法分析铝合金曲面零件的应力状态与分布均匀性的演变过程，以揭示采用均匀压力线圈的铝合金曲面零件电磁校形机理。研究结果表明：冲压成形曲面零件在厚度方向上应力分布不均匀，外层受拉应力、内层受压应力，卸载后零件回弹严重；采用均匀压力线圈对冲压预成形零件施加整体近均匀分布的脉冲磁压力，曲面零件应力分布更均匀，内、外层均受拉应力，卸载后零件回弹大大减小，零件成形精度大幅提高。

Springback is one of the inevitable problems in the forming process of aluminum alloy sheet, which directly affects the forming accuracy of aluminum alloy part. According to the shape characteristic of aluminum alloy curved surface part, its electromagnetic sizing was conducted by the uniform pressure coils with 3D conformal structure, and the evolution process of stress state and distribution uniformity for aluminum alloy curved surface part was analyzed by the whole process and multi-physics field coupling numerical simulation method to reveal the electromagnetic sizing mechanism of aluminum alloy curved surface part by uniform pressure coils. The results show that the stress distribution along the thickness direction of stamping curved surface part is not uniform with the outer layer under tensile stress and the inner layer under compressive stress, and the springback of part is serious after unloading. However, when the stamping pre-forming part is applied an over nearly uniform pulse magnetic pressure by the uniform pressure coils, the stress distribution of curved surface part is more uniform with the outer and inner layers under tensile stress. Thus, the springback of part is significantly decreased after unloading, and the forming accuracy of part is well improved.

基金项目：

湖北省自然科学基金资助项目（2019CFB196）

梅龙（1987-），男，硕士，高级工程师 E-mail：meilong68@163.com 通讯作者：刘维（1986-），男，博士，讲师 E-mail：weiliu@whut.edu.cn

参考文献：

［1］李春峰. 电磁成形
［M］.北京：科学出版社，2016.

Li C F. Electromagnetic Forming
［M］.Beijing: Science Press,2016.

［2］Psyka V, Rischa D, Kinsey B L. Electromagnetic forming-A review
［J］. Journal of Materials Processing Technology, 2011, 211:787-829.

［3］Li J J，Li L，Wan M，et al. Innovation applica-tions of electromagnetic forming and its fundamental problems
［A］.The 17th International Conference on Metal Forming, Metal Forming 2018
［C］. Toyohashi, Japan: Procedia Manufacturing, 2018.

［4］Vincent Vohnout. A Hybrid Quasi-static/dynamic Process for Forming Large Sheet Metal Parts from Aluminum Alloys
［D］. Columbus：Ohio State University, 1998.

［5］Shang J, Daehn G. Electromagnetically assisted sheet metal stamping
［J］. Journal of Materials Processing Technology, 2011, 211: 868-874.

［6］Woodward S, Weddeling C, Daehn G, et al. Production of low-volume aviation components using disposable electromagnetic actuators
［J］. Journal of Materials Processing Technology, 2011, 211: 886-895.

［7］Iriondoa E, Gutiérreza M A, Gonzáleza B. Electromagnetic impulse calibration of high strength sheet metal structures
［J］. Journal of Materials Processing Technology, 2011, 211:909-915.

［8］Iriondoa E, Alcarazb J L, Daehn G S. Shape calibration of high strength metal sheets by electromagnetic forming
［J］. Journal of Manufacturing Processes, 2013,15:183-193.

［9］刘大海.5052铝合金板材磁脉冲辅助冲压成形变形行为及机理研究
［D］. 哈尔滨：哈尔滨工业大学，2010.

Liu D H. Deformation Behavior and Mechanism of Electromagnetically Assisted Sheet Metal Stamping of 5052 Aluminum Alloy
［D］. Harbin：Harbin Institute of Technology, 2010.

［10］Xiong W R, Wang W P, Wan M, et al. Geometric issues in V-bending electromagnetic forming process of 2024-T3 aluminum alloy
［J］. Journal of Manufacturing Processes, 2015,19:171-182.

［11］Cui X H，Yu H L，Wang Q S. Electromagnetic impulse calibration in V-shaped parts
［J］. International Journal of Advanced Manufacturing Technology, 2018，97:2959-2968.

［12］李国栋，黄亮，李建军，等. 铝合金板材磁脉冲辅助U形弯曲过程回弹数值模拟分析
［J］. 精密成形工程，2018,10（1）：148-155.

Li G D, Huang L, Li J J, et al. Numerical simulation of springback analysis for electromagnetic assisted U-shaped bending of aluminum alloy sheet
［J］. Journal of Netshape Forming Engineering,2018,10(1):148-155.

［13］Kamal M, Daehn G S. A uniform pressure electromagnetic actuator for forming flat sheets
［J］. Journal of Manufacturing Science and Engineering, 2007, 129: 369-379.

［14］Kim J H, Kim D, Lee M G. Experimental and numerical analysis of a rectangular helical coil actuator for electromagnetic bulging
［J］. International Journal of Advanced Manufacturing Technology, 2015, 78: 825-839.

［15］孟正华. 镁合金板材温热电磁成形性能及本构方程研究
［D］. 武汉：武汉理工大学，2009.

Meng Z H. Study on Formability and Constitutive Equation of Magnesium Alloy Sheet under Warm and Electromagnetic Hybrid Forming Condition
［D］. Wuhan：Wuhan University of Technology, 2009.

［16］胡建华，宁博文，张达，等. 铝合金曲面零件板料回弹的电磁成形校正试验
［J］. 塑性工程学报，2013，20(4)：104-108.

Hu J H, Ning B W, Zhang D, et al. Experimental study on springback of aluminum alloy sheet by electromagnetic forming
［J］. Journal of Plasticity Engineering,2013,20(4)：104-108.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】