锻压技术

铜铝复合板等通道转角挤压模具设计及数值模拟

英文标题：Die design and numerical simulation of equalchannel angular pressing for CuAl composite plate

作者：张智敏潘健怡陈宇星李锦浩邝先霖

单位：华南理工大学广州学院

分类号：TG37

出版年,卷(期):页码：2021,46(1):136-141

摘要：

为了深入研究通过挤压成形制备铜铝复合板的工艺方法，利用等通道转角挤压（ECAP）方法工艺与设备简单的优点，设计了一套可拆卸、可更换模具转角的实验模具方案。利用HyperXtrude对铜铝复合板的等通道转角挤压过程进行数值模拟，分别选取模具转角为0°，15°，30°，45°和60°的5组方案进行了模拟与分析，对铜铝复合板在等通道转角挤压过程中的压力、应力场张量、速度场分布进行了探讨。结果表明：转角从0°变化至60°，压力从186.1 MPa下降至141.5 MPa；当转角为45°时，金属流动速度最为均匀。

In order to further study the process method of producing Cu-Al composite plate by pressing method, the experimental die scheme with detachable and replaceable die angular was designed based on the advantages of simple process and equipment for the equal-channel angular pressing method. The equal-channel angular pressing process of Cu-Al composite plate was numericaly simulated by HyperXtrude, then, five sets of schemes with the die angular of 0°, 15°, 30°, 45° and 60° were simulated and analyzed, and the pressure, stress field tensor and velocity field distribution of Cu-Al composite plate in the process of equal-channel angular pressing were discussed. The results show that when the angular changes from 0° to 60°, the pressure decreases from 186.1 MPa to 141.5 MPa. In addition, when the angular is 45°, the metal flow velocity is the most uniform.

基金项目：

基金项目:国家金属材料近净成型工程技术研究中心开放基金项目（2018010）；广东省大学生创新创业训练计划项目（201812617015）

作者简介：张智敏(1998-)，男，本科生 E-mail：1552965276@qq.com 通讯作者：潘健怡(1983-)，男，博士，副教授 E-mail：panjianyi@gcu.edu.cn

参考文献：

[1]尚郑平, 王项,范国栋,等.铜铝复合材料生产与应用[J].中国有色金属，2014,(13):45-46.

Shang Z P, Wang X, Fan G D, et al. Production and application of copperaluminum composite materials[J].China Nonferrous Metals,2014,(13):45-46.

[2]夏兆辉, 姚辉,孙谊媊,等.铜铝复合材料在电力电气行业的研究和应用[J].热加工工艺，2016，45(22):24-28,32.

Xia Z H, Yao H, Sun Y Q, et al. Research and application of copperaluminum composite in electric power industry[J].Hot Working Technology, 2016,45(22):24-28, 32.

[3]周照耀, 潘健怡,丁司懿. 一种散热器用铜铝复合型材一次挤压成型工艺及其装置[P].中国：CN102172660A,2011-09-07.

Zhou Z Y, Pan J Y, Ding S Y. An extrusion forming device and its process for copperaluminum composite radiator profile [P].China: CN102172660A,2011-09-07.

[4]杨永顺, 杨栋栋,杨明,等.铜铝复合热挤压成型工艺[J].河南科技大学学报：自然科学版,2011,32(6):1-4.

Yang Y S, Yang D D, Yang M, et al. Hot extrusion technology of copperaluminum composite plate [J]. Journal of Henan University of Science Technology: Natural Science, 2011, 32(6):1-4.

[5]Chen W G, Feng P, Dong L L, et al. Experimental and theoretical analysis of microstructural evolution and deformation behaviors of CuW composites during equal channel angular pressing [J]. Materials & Design, 2018,142: 166-176.

[6]Liu X B, Chen R S,Han E H. Preliminary investigations on the MgAlZn/Al laminated composite fabricated by equal channel angular extrusion [J]. Journal of Materials Processing Technology, 2009, 209(10): 4675-4681.

[7]汪丹丹, 田无边,丁健翔,等.等通道转角挤压制备Ag/Ti3AlC2复合材料及其热处理研究[J].无机材料学报,2020,35(1):46-52.

Wang D D, Tian W B, Ding J X, et al. Ag/Ti3AlC2 composites prepared by equal channel angular pressing followed by heat treatment [J]. Journal of Inorganic Materials, 2020, 35(1): 46-52.

[8]张能锦, 周生刚,牛永胜,等.铸造-挤压法制备Al/Cu复合材料[J].有色金属工程，2017,7(4);17-21.

Zhang N J, Zhou S G, Nui Y S, et al. Preparation of Al/Cu compound materials using casting extrusion method [J]. Nonferrous Metals Engineering, 2017, 7(4);17-21.

[9]Wu D, Chen R S, Han E H.Bonding interface zone of MgGdY/MgZnGd laminated composite fabricated by equal channel angular extrusion [J]. Transactions of Nonferrous Metals Society of China, 2010,20(2): 613-618.

[10]Mohammad Asgri, Faramarz Freshteh Saniee. Production of AZ80/Al composite rods employing nonequal channel lateral extrusion [J]. Transaction of Nonferrous Metals Society of China,2016,26(5): 1276-1283.

[11]杨栋栋. 铜铝复合板挤压连接复合成型工艺研究[D].洛阳：河南科技大学,2011.

Yang D D. Aluminum Composite Panel Extrusion Forming Process of Composite Connections [D]. Luoyang: Henan University of Science and Technology,2011.

[12]田华, 邓云伟,崔元萍. 等通道转角挤压工艺制备块体超细晶纯铜的研究[J].热加工工艺，2011,40(5):13-14,19

Tian H, Deng Y W, Cui Y P. Preparation of ultrafine grain pure copper by equal channel angular pressing[J]. Hot Working Technology, 2011, 40(5):13-14,19.

[13]苏哲. 铜板带可逆热轧过程有限元模型的建立和分析[J].重型机械,2017,(1):51-57.

Su Z. Establishment and analysis of the reversible hot rolling process FEM of copper plate [J]. Heavy Machinery, 2017,(1):51-57.

[14]张小飞. 等通道转角挤压设备的设计研究[D].南京：南京理工大学,2016.

Zhang X F. Study and Design of Equalchannel Corner Extrusion Equipment[D]. Nanjing:Nanjing University of Science and Technology,2016.

[15]章震威, 王军丽,张清龙,等.6061铝合金复合挤压有限元模拟及试验研究[J].热加工工艺，2017,46(15):137-141.

Zhang Z W, Wang J L, Zhang Q L, et al. Finite element simulation and experimental study of 6061 aluminum alloy processed by cyclic equal channel compression[J]. Hot Working Technology, 2017,46(15):137-141.

[16]谢文芳, 谢敬佩,王爱琴,等.铜铝铸轧复合板复合过程数值模拟及机理研究[J].特种铸造及有色合金，2019,39(12):1294-1297.

Xie W F, Xie J P,Wang A Q, et al. Numerical simulation and mechanism of the castingrolling copperaluminum clad plates[J].Special Casting Nonferrous Alloys, 2019,39(12):1294-1297.

[17]王艳艳, 刘平,刘新宽,等.结合层对铜/铝复合材料力学性能的影响[J].稀有金属,2018,42(5):524-530.

Wang Y Y, Liu P, Liu X K, et al. Mechanical properties of copper/aluminum composite with bonding layer [J]. Chinaese Journal of Rare Metals, 2018,42(5):524-530.

服务与反馈：

【文章下载】【加入收藏】