锻压技术

非调质钢亚动态再结晶分析及数学模型建立

英文标题：Analysis on subdynamic recrystallization and establishment of mathematic model for nonquenched and tempered steel

作者：梁孟强李晓霞张亚龙章伟黄大成

单位：上海工程技术大学德西福格汽车配件有限公司

关键词：TL1438非调质钢亚动态再结晶热模拟试验动力学模型应变保温时间

分类号：TG441.8

出版年,卷(期):页码：2021,46(1):175-178

摘要：

根据18组热模拟试验及不同工艺参数的设计，获得TL1438非调质钢经过亚动态再结晶后的应力-应变曲线，比较了应变量、应变温度、应变速率、两次压缩后的保温时间对该过程的影响。采取理论与试验相互参照的方式，结合相关理论公式的推算，得出了两次压缩后的晶粒尺寸和动力学模型。结果显示：随着应变温度的增加，亚动态再结晶较易产生且速度较快，而应变速率的影响则相反，其中，两次压缩后的保温时间作用更加明显。通过物理试验及微观组织的研究，以达到预测非调质钢组织演变规律、优化工艺参数的目的，为今后分析此类锻件的综合力学性能和数值模拟提供参考。

According to the eighteen sets of thermal simulation tests and design of different process parameters, the stress-strain curve of TL1438 non-quenched and tempered steel was obtained after sub-dynamic recrystallization, and the influences of strain, strain temperature, strain rate and holding time after two times of compression on the process were compared. Combined with the calculation of related theoretical formulas, the grain size and kinetic model after two times of compression were obtained by the method of mutual reference between theory and test. The results show that as the strain temperature increases, the sub-dynamic recrystallization is easier to produce, and the generation speed is faster. But the effect of strain rate is reversed, and the effect of holding time after two times of compression is more obvious. Therefore, through physical experiments and microstructure research, the purpose of predicting the evolution law of non-quenched and tempered steel structure and optimizing process parameters is achieved, which provides a reference for the future analysis on the comprehensive mechanical properties and numerical simulation of this kind of this kind of forgings.

基金项目：

基金项目:上海工程技术大学实践教学建设项目（x202024001）

作者简介：梁孟强（1989-），男，硕士，实验师 E-mail：lmq158965@sina.com

参考文献：

[1]常开地, 王萍,刘卫萍.非调质钢的发展现状和应用研究[J].金属热处理,2011,36(3):80-85.

Chang K D, Wang P, Liu W P. Development status and application research of nontempered steel[J].Heat Treatment of Metals,2011,36(3):80-85.

[2]谢懿. 实用锻压技术手册[M]. 北京：机械工业出版社，2003.

Xie Y, Practical Forging Technology Manual [M]. Beijing: China Machine Press, 2003.

[3]唐丽. 曲轴用非调质钢49MnVS3的控制轧制与控制冷却[D].沈阳：东北大学,2002.

Tang L. Controlled Rolling and Controlled Cooling of Nonquenched and Tempered Steel 49MnVS3 for Crankshaft [D]. Shenyang: Northeastern University, 2002.

[4]王进, 褚忠,陈军.38MnVS6非调质钢高温奥氏体流动应力模型研究[J].热加工工艺,2010,39(20):5-8.

Wang J, Chu Z, Chen J. Study on high temperature austenite flow stress model of 38MnVS6 nonquenched and tempered steel[J].Hot Working Technology,2010,39(20):5-8.

[5]Rao K P, Prasad Y K D V, Hawbolt E B. Study of fractional softening in multistage hot deformation[J]. Journal of Materials Processing Technology, 1998,77(1-3): 166-174.

[6]Vervynckt S, Thibaux P, Verbeken K. Effect of niobium on the microstructure and mechanical properties of hot rolled micro alloyed steels after recrystallizationcontrolled rolling[J]. Metals and Materials International, 2012,18 (1):37-46.

[7]蔺永诚, 陈明松,钟掘. 42CrMo钢亚动态再结晶行为研究[J].中南材料热处理学报,2009,30(2):71-75.

Lin Y C, Chen M S, Zhong D. Study on subdynamic recrystallization behavior of 42CrMo steel [J]. Journal of Central South Institute of Materials Heat Treatment,2009,30(2):71-75.

[8]黄杰. 奥氏体的形变与再结晶及其对相变的影响[D]. 上海:上海交通大学,2005.

Huang J. Deformation and Recrystallization of Austenite and Its Effect on Phase Transformation [D]. Shanghai: Shanghai Jiaotong University, 2005.

[9]杨占兵, 王森,王福明,等.冷却速度对含Ti非调质钢中晶内铁素体形成的影响[J].金属热处理,2008,33(6):24-27.

Yang Z B, Wang S, Wang F M, et al. Effect of cooling rate on the formation of intragranular ferrite in Ti-containing nonquenched and tempered steel [J]. Heat Treatment of Metals, 2008,33(6): 24-27.

[10]徐光, 张丕军.金属低温变形理论与技术[M].北京:冶金工业出版社,2007.

Xu G, Zhang P J.Theories and Technology of Low Temperature Deformation of Metals[M].Beijing: Metallurgical Industry Press, 2007.

[11]Kunitskaya I N, Spektor Ya I, Olshanetskii V E. Structural and kinetic features of dynamic recrystallization of alloyed austenite upon multi pass hot deformation[J].Metal Science and Heat Treatment, 2012,53(9):498-502.

[12]Humphreys F J, Hatherly M. Rcrystallization and Related Annealing Phenomena[M].UK: Elsevier Ltd ., 2004.

服务与反馈：

【文章下载】【加入收藏】