锻压技术

汽车发罩外板冲压回弹补偿研究

英文标题：Springback compensation research of stamping for automobile hood outer plate

作者：孙刚徐建军白朋鹏张晓静王宪峰韩冬

分类号：TG386

出版年,卷(期):页码：2021,46(5):64-71

摘要：

以某车型发罩外板为研究对象，通过对该零件的工艺进行模拟分析，计算每一道工序应力释放后的回弹矢量，同时，考虑每一道工序的上模压料板与下模贴合时对工序件的附加变形所引起的材料流动以及回弹，选择合理的补偿方案，精准地模拟并评价回弹矢量，基于补偿数据进行A面重构，并根据重构优化后的数据进行方案验证以及现场出件验证。现场出件结果表明：产品A面区域的调试工作量降低了60%，首件尺寸合格，与模拟预测结果一致，模具无机加整改工作，有效地解决了发罩外板零件回弹不稳定的难题。结果表明，所提到的方法对提高CAE模拟的准确性、提升回弹补偿精度、避免模具装配后的型面机加整改、降低模具调试优化轮次、提前达到装车要求具有重要的指导意义。

For the hood outer plate of a certain car, the springback vector after the stress release of each process was calculated by the process simulation analysis of the part. At the same time,considering the material flow and springback caused by the additional deformation of process parts when the pressed plate in the upper die was contacting with the lower die in each process, the reasonable compensation scheme was selected. Then, the spingback vector was simulated and evaluated exactly, and A-surface restructure was conducted by the compensation data. Based on the reconstructed and optimized data, the scheme was verified by producing the parts on site. The results show that the try-out work of the A-surface area for product is reduced by 60%, and the first part is qualified in size, which is consistent with the simulation prediction result. So the die does not require rectification work to solve the problem of the unstable springback for hood outer plate effectively, and the method proposed has important guiding significance for improving the accuracy of CAE simulation and springback compensation, avoiding the rectification of surface machining after die assembly, reducing the optimization times of die debugging, and meeting the requirements for assembling the whole car in advance.

基金项目：

孙刚（1977-），男，博士，高级工程师 E-mail：gang.sun.pl@faw-vw.com 通讯作者：徐建军（1982-），男，硕士，高级工程师 E-mail:qs2463001982@163.com

参考文献：

[1]赵侠. 数值模拟技术在汽车发动机罩外板拉深质量控制中的应用研究[D]. 成都：西华大学,2006.

Zhao X. Application of Numerical Simulation in the Drawing Quality Control of Engine Hood Exterior Panel[D]. Chengdu: Xihua University,2006.

[2]张健. 汽车覆盖件回弹的数值模拟[D]. 济南：山东大学,2009.

Zhang J. Numerical Simulation of Springback of Automobile Panel[D]. Jinan: Shandong University, 2009.

[3]张峻. 汽车覆盖件成形过程数值模拟与优化技术研究[D]. 杭州：浙江大学，2005.

Zhang J. Research on Numerical Simulation and Optimization Technology of Automobile Panel Forming Process[D].Hangzhou:Zhejiang University, 2005.

[4]肖景容，姜奎华. 冲压工艺学[M]. 北京:机械工业出版社,1999.

Xiao J R, Jiang K H. Stamping Technology[M]. Beijing:China Machine Press, 1999.

[5]贾文博，王振宏，尹凯，基于Autoform的汽车翼子板回弹补偿方法研究[J]. 模具工业,2017,43(9): 7-10.

[6]孔敏，胡伟，莫健华,等. 基于AUTOFORM的汽车顶棚冲压回弹评估及补偿研究[J].锻压技术， 2019，44（8）: 41-48.

Kong M, Hu W, Mo J H, et al. Research on evaluation and compensation of stamping springback for automobile roof based on AUTOFORM[J]. Forging & Stamping Technology, 2019, 44(8):41-48.

[7]司马忠效，廖小刚. 基于Autoform的发动机罩外板滑移线优化分析[J].重庆理工大学学报：自然科学，2017，31（5）: 39-42.

Sima Z X, Liao X G. Skid line optimization and simulation of hood outer panel based on AutoForm[J]. Journal of Chongqing University of Technology: Natural Science, 2017, 31(5):39-42.

[8]王健，惠进录，吴进强. 某款发动机罩外板冲压工艺分析[J]. 模具技术,2013,(1)：32-34.

Wang J, Hui J L, Wu J Q. Stam ping process analysis of a particular panel hood outer[J]. Die and Mould Technology, 2013,(1)：32-34.

[9]邓勇宾，翟海峰,张利猛,等.基于AutoForm的回弹补偿[J].模具技术, 2017,(2):50-53.

Deng Y B, Zhai H F, Zhang L M, et al. The spingback compensation based on AutoForm[J]. Die and Mould Technology, 2017, (2):50-53.

[10]董家玲，闫巍,徐勇,等. 铝合金发动机罩外板冲压工艺技术研究[J].汽车工艺与材料,2016,(11):8-12.

Dong J L, Yan W, Xu Y, et al. Research on stamping process technology of aluminum alloy hood outer panel[J]. Automobile Technology & Material, 2016,(11):8-12.

[11]涂小文. 基于AutoForm 软件的回弹计算及补偿技术揭秘: 上册[M]. 武汉: 湖北科学技术出版社，2016.

Tu X W. Rebound Calculation and Compensation Technology Revelation Based on AutoForm Software: Volume 1[M]. Wuhan: Hubei Science and Technology Publishing House,2016.

[12]张博凡，王增强.Autoform Sigma模块在汽车后盖内板模具调试中的应用[J]. 模具工业,2014,40(7): 40-42.

Zhang B F, Wang Z Q. Application of Autoform Sigma in the tryout of die for automotive decklid inner plate[J]. Die & Mould Industry, 2014, 40(7): 40-42.

服务与反馈：

【文章下载】【加入收藏】