锻压技术

双球铰连接柱塞缸的结构性能

英文标题：Structural performance of plunger cylinder connected by a double ball hinge

作者：刘艳妍欧士浩刘东林

单位：兰州交通大学

分类号：TG315

出版年,卷(期):页码：2021,46(5):158-162

摘要：

针对自由锻造液压机的双球铰连接柱塞缸，基于球铰自锁条件，分析了柱塞缸的工作状态，研究了连接球铰副挤压工件时的自锁偏心距，明确了柱塞缸连接球铰副的运动条件，为合理利用柱塞缸的连接球铰副提供了依据。根据柱塞缸的结构特点，建立了柱塞的受力模型，分析了柱塞的受力状态，研究了柱塞对导向套和压套的侧推力以及控制柱塞缸侧推力的条件，明确了压套是制约工作缸抗偏载的关键因素。结合柱塞的导向结构特点和受力分析，阐述了在用柱塞缸导向结构的工艺性缺陷，提出了改善柱塞缸抗偏载性能的结构方案，为大型自由锻造液压机的柱塞缸结构设计提供了有效支撑。

For the plunger cylinder connected by a double ball hinge of free forging hydraulic press, the working condition of plunger cylinder was analyzed based on the self-lock condition of ball hinge, and the self-lock eccentricity was studied when the workpiece was extruded by a connecting ball pair hinge. Then, the movement condition of connecting ball hinge pair for plunger cylinder was determined to provide basis for the rational use of connecting ball hinge pair for plunger cylinder. Furthermore, based on the structure characteristics of plunger cylinder, the mechanical model of plunger was built, the force state of plunger was analyzed, the side thrust of plunger to guide sleeve and pressure sleeve was studied, the conditions of controlling side thrust for plunger cylinder were analyzed, and it was clear that the pressure sleeve was the critical factor for restricting the bias load resistance of working cylinder. Finally, combining the characteristics of the guide structure and the force analysis of plunger, the technical defects of the guide structure for plunger cylinder in use were elaborated, and the structural scheme for improving the bias load resistance performance of plunger cylinder was proposed to provide effective support for the structural design of plunger cylinder for large free forging hydraulic press.

基金项目：

国家自然科学基金资助项目（51265022）；甘肃省科技计划资助项目（145RJZA187）

刘艳妍（1964-），女，学士，教授 E-mail：liuyy@mail.lzjtu.cn

参考文献：

[1]高峰，郭为忠，宋清玉，等.重型制造装备国内外研究与发展[J].机械工程学报,2010,46(19):92-107.

Gao F, Guo W Z, Song Q Y, et al. Current development of heavyduty manufacturing equipment[J]. Journal of Mechanical Engineering, 2010, 46(19)：92-107.

[2]夏巨谌, 邓磊,金俊松,等.我国精锻技术的现状及发展趋势[J].锻压技术,2019,44(6):1-16,29.

Xia J C, Deng L, Jin J S, et al. Current situation and development trend of precision forging technology in China[J]. Forging & Stamping Technology,2019,44(6):1-16,29.

[3]刘艳妍, 杨晋,马学鹏，等.上推式快锻液压机活动横梁转动自锁条件研究[J].机械工程学报,2014,50(8):66-72.

Liu Y Y, Yang J, Ma X P, et al. Rotating selflocked condition research of the pushing high speed forging hydraulic press movable beam[J].Journal of Mechanical Engineering, 2014,50(8):66-72.

[4]赵长财，李文平，周维海，等.液压机柱塞球面支撑的力学及机构学分析[J] .重型机械,1996,(4):15-18.

Zhao C C, Li W P, Zhou W H, et al. Hydraulic press plunger spherical connection of mechanics and mechanisms analysis[J]. Heavy Machines, 1996, (4):15-18.

[5]郭玉玺. 机械行业标准《油泵直接传动双柱斜置式自由锻造液压机》释义[J].锻压技术,2012,37(5):185-194.

Guo Y X. Explanation of machinery industry standard “Doublecolumn oblique opendie forging hydraulic press with direct drive of oil pumb” [J]. Forging & Stamping Technology,2012,37(5):185-194.

[6]刘艳妍, 杨晋.双柱锻造液压机工作缸球铰力学分析[J].机械科学与技术,2014,33(6):789-791.

Liu Y Y, Yang J. The mechanics analysis of spheric joint of working cylinder for double column type forging hydraulic press[J].Mechanical Science and Technology for Aerospace Engineering, 2014, 33(6):789-791.

[7]赵石岩, 赵鑫,金淼,等.双球铰结构柱塞缸侧推力的实验研究[J]. 塑性工程学报,2015,22(4):111-140.

Zhao S Y, Zhao X, Jin M, et al. Experimental study on side thrust of piston cylinder with structure[J]. Journal of Plasticity Engineering, 2015, 22(4):111-140.

[8]邹春来, 黄明辉,湛利华，等.巨型压机主工作缸柱塞与活动横梁连接方式的研究[J].现代制造工程,2009,(2):101-103．

Zou C L, Huang M H, Zhan L H，et al. Study on the connections between the press plunger and moving beam of largescale stamp forging hydrostatic Press [J]. Modern Manufacturing Engineering,2009,(2):101-103.

[9]李瑞宁, 刘艳妍.球铰自锁条件对液压机工作缸的影响分析[J].锻压技术,2015,40(7):73-76.

Li R N, Liu Y Y. Analysis on the influence of spherical hinge′s selflocked condition on hydraulic cylinder [J]. Forging & Stamping Technology,2015,40(7):73-76.

[10]张玺, 杨晋,高俊峰.锻造液压机工作缸连接球铰的结构研究[J].锻压技术,2018,43(2):116-121.

Zhang X, Yang J, Gao J F. Study on structure of connecting spherical hinge of forging hydraulic cylinder[J]. Forging & Stamping Technology,2018,43(2):116-121.

[11]孙桓, 陈作模,葛文杰.机械原理[M].第7版.北京:高等教育出版社,2007.

Sun H, Chen Z M, Ge W J. Mechanisms and Machine Theory[M]. The 7th Edition. Beijing: Higher Education Press, 2007.

[12]闻邦椿, 张义民,鄂中凯,等.机械设计手册[M].第5版.北京:机械工业出版社, 2010.

Wen B C, Zhang Y M, E Z K, et al. Machine Design Handbook[M]. The 5th Edition. Beijing: China Machine Press, 2010.

服务与反馈：

【文章下载】【加入收藏】