锻压技术

曲面辊弯成形的实验研究

英文标题：Experimental study on curved surface roll-bending

分类号：TG306

出版年,卷(期):页码：2021,46(6):99-105

摘要：

为了满足高效地制造单件或小批量的个性化、多样化、大型化的三维曲面钣金零件的市场需求，开发了一种新的柔性成形技术——曲面辊弯成形技术。该工艺采用一个上柔性辊和两个下柔性辊作为成形工具，并可以在垂直方向上调整柔性辊的轴线形状，通过柔性辊的旋转，钣金同时在纵向和横向上发生弯曲，可以实现连续成形。阐述了曲面辊弯成形的原理及其实验装置，进行了典型的双曲面零件——鞍面件和凸面件的成形实验，并利用双目立体视觉测量系统对实验结果进行了测量，分析了成形曲面件的成形精度、光滑度及厚度的变化规律。结果表明：成形曲面件具有良好的精度，成形曲面与所要求的曲面形状吻合良好，为曲面辊弯成形工艺的开发设计提供了一定的参考。

In order to meet the market demand for effectively manufacturing of single piece or small batches of personalized, diversified and large-scale sheet metal parts with three-dimensional curved surface, a new flexible forming technology, namely, curved surface roll-bending technology was developed, which used an upper flexible roll and two lower flexible rolls as forming tools and adjusted the axis shape of flexible roll in the vertical direction. The sheet metal parts were bent in both longitudinal and transverse directions simultaneously by the rotation of flexible rolls to realize continuous forming. Then, the principle and experimental device of curved surface roll-bending process were introduced, and the forming experiments of typical hyperboloid parts such as saddle part and convex part were conducted. Furthermore, the experiment results were measured and analyzed by a binocular stereo vision measurement system, and the change laws for forming accuracy, smoothness and thickness of formed curved surface parts were analyzed. The results show that the formed curved surface part has good precision, and the formed curved surface is in good agreement with the required curved surface shape to provide a certain reference for the development and design of curved surface roll-forming process.

基金项目：

国家自然科学基金资助项目（51075186）；国家863计划项目（2009AA04Z117）

兰英武(1983-)，男，硕士，助理工程师 E-mail：lanyingwu2005@163.com

参考文献：

[1]Gong X P, Li M Z, Hu Z Q, et al. Research on continuous multi-point forming technology for three-dimensional sheet metal[J]. International Journal of Materials & Product Technology, 2010, 38(2-3): 210-222.

[2]周晗琼, 武凯, 孙宇,等.四辊卷板成形过程中宽度效应的影响规律[J].锻压技术, 2019,44(11):43-50.

Zhou H Q, Wu K, Sun Y, et al. Influence law of width effect in forming process of four-roller bending plate[J]. Forging & Stamping Technology, 2019,44(11):43-50.

[3]Qu E H, Li M Z, Li R.Investigation of forming accuracy in mul-tipoint forming with composite elastic pads[J]. The International Journal of Advanced Manufacturing Technology, 2019, 105(10):4401-4413.

[4]Cai Z Y, Lan Y W, Li M Z, et al. Continuous sheet metal forming for doubly curved surface parts[J].International Journal of Precision Engineering and Manufacturing, 2012,13(11):1997-2003.

[5]Sui Z, Cai Z Y, Lan Y W, et al. Simulation and software design of continuous flexible roll bending process for three dimensional surface parts[J].Materials & Design, 2014,54(11):498-506.

[6]龚学鹏，李明哲，胡志清.使用可弯曲辊的三维曲面卷板成形过程数值模拟[J].吉林大学学报:工学版，2008，38(6)：1310-1314.

Gong X P, Li M Z, Hu Z Q. Numerical simulation of three-dimensional surface bending by using bendable roller[J].Journal of Jilin University:Engineering and Technology Edition,2008,38(6):1310-1314.

[7]Cai Z Y, Sui Z, Cai F X, et al. Continuous flexible roll forming for three-dimensional surface part and the forming process control[J].International Journal of Advanced Manufacturing Technology, 2013, 66(1-4): 393-400.

[8]胡志清.连续多点成形方法、装置及成形实验研究[D].长春:吉林大学,2008.

Hu Z Q.Research on Continuous Multi-point Forming Method Equipment and Experiment[D].Changchun: Jilin university,2008.

[9]Cai Z Y, Li M Z, Lan Y W. Three-dimensional sheet metal continuous forming process based on flexible roll bending: Principle and experiments[J].Journal of Materials Processing Technology, 2012,212:120-127.

[10]兰英武.曲面辊弯成形过程的数值模拟与实验研究[D].长春:吉林大学, 2019.

Lan Y W. Numerical Simulation Analysis and Experimental Research on Roll Bending Forming Process of Three-Dimensional Surface [D].Changchun: Jilin University, 2019.

[11]Yoon S J, Yang D Y. Investigation into a new incremental forming process using an adjustable punch set for the manufacture of a doubly curved sheet metal[J].Proceedings of the Institution of Mechanical Engineers, 2001,215: 991-1004.

[12]Yoon S J, Yang D Y. Development of a highly flexible incremental roll forming process for the manufacture of a doubly curved sheet metal[J].CIRP Annals-Manufacturing Technology, 2003, 52(1): 201-204.

服务与反馈：

【文章下载】【加入收藏】