锻压技术

注射与注射压缩成形工艺对精密透镜面形偏差及光学畸变影响的对比研究

英文标题：Comparative research of influence for injeciton and injeciton compression molding process on surface deviation and optical distortion for precision lens

作者：周晓伟李茂源张云周华民

单位：华中科技大学材料科学与工程学院材料成形与模具技术国家重点实验室

关键词：精密透镜注射压缩成形面形偏差透镜模组光学畸变

分类号：TQ320.66

出版年,卷(期):页码：2021,46(9):230-236

摘要：

为提高精密聚合物透镜模组的光学性能，以大直径非球面透镜为研究对象，分析了注射与注射压缩成形工艺透镜面形偏差的差异，并通过透镜模组成像计算研究了透镜面形偏差对模组光学畸变的影响规律。结果表明：注塑成形工艺因素导致透镜面形偏差且分布不均匀，注射压缩成形工艺能够有效降低透镜面形偏差；单个透镜的面形偏差大小与模组光学畸变性能优劣并不完全呈正相关，模组网格畸变与TV畸变随透镜面形偏差的降低而减小。透镜模组中各透镜的光学功能与面形特征相互耦合，仅降低透镜的面形偏差无法提高透镜模组的整体成像性能，需要综合考虑模组中各透镜的功能、性能指标要求与面形特征等因素，建立与具体成像指标相关联的透镜面形偏差评价标准。

In order to improve the optical performance of precision polymer lens modules, for a large diameter aspheric lens, the difference of lens surface deviation between injection and injection compression molding process was analyzed, and the influence laws of lens surface deviation on the optical distortion for lens module was investigated by the lens module imaging calculation. The results show that the injection molding process factors cause the lens surface deviation and uneven distribution, and the injection compression molding process effectively deduces the lens surface deviation. Meanwhile, the surface deviation of a single lens is not completely positively correlated with the optical distortion performance of lens module, and the grid distortion and TV distortion of lens module decrease with the reduction of lens surface deviation. However, the optical functions and surface characteristics of each lens in the lens module are coupled with each other, which only reduces the lens surface deviation, but cannot improve the overall imaging performance of the lens module. Thus, it is necessary to comprehensively consider the function, performance index requirements and surface characteristics of each lens in the module and establish the evaluation standard of the lens surface deviation associated with the specific imaging index.

基金项目：

国家自然科学基金重点项目(51635006)

周晓伟（1995-），男，博士研究生 E-mail：xwzhou@hust.edu.cn 通信作者：张云（1981-），男，博士，教授 E-mail：marblezy@hust.edu.cn

参考文献：

[1]Bumer S. Handbook of Plastic Optics[M]. The Second Edition. New Jersey: John Wiley & Sons, 2011.

[2]任秀芬. 基于3D打印的汽车主模型尾灯模块的制造 [J]. 锻压技术，2020 ,45(4):134-139.

Ren X F. Manufacturing of tail lamp module of master model fixture for automobile based on 3D printing [J]. Forging & Stamping Technology，2020 ,45(4): 134-139.

[3]Schaub M. Molded Optics: Design and Manufacture [M]. The First Edition. Florida: CRC Press, 2011.

[4]Wang K, Liu S, Chen F, et al. Effect of manufacturing defects on optical performance of discontinuous freeform lenses [J]. Optics Express, 2009, 17(7):2981-2991.

[5]Oliaei E, Heidari B S, Davachi S M, et al. Warpage and shrinkage optimization of injectionmolded plastic spoon parts for biodegradable polymers using taguchi, ANOVA and artificial neural network methods [J]. Journal of Materials Science and Technology, 2016, 32(8): 710-720.

[6]Tsai K M, Hsieh C Y, Lo W C. A study of the effects of process parameters for injection molding on surface quality of optical lenses [J]. Journal of Materials Processing Technology, 2009, 209(7): 3469-3477.

[7]Lan X, Li C, Yang C, et al. Optimization of injection molding process parameters and axial surface compensation for producing an aspheric plastic lens with large diameter and center thickness [J]. Applied Optics, 2019, 58(4): 927-934.

[8]Zhang Y, Yan G, Li Z, et al. Quality improvement of collimating lens produced by precision glass molding according to performance evaluation [J]. Optics Express, 2019, 27(4): 5033-5047.

[9]Zhou X, Zhang Y, Yu W, et al. An imaging performance analysis method correlated with geometrical deviation for the injection molded highprecision aspheric negative plastic lens[J]. Journal of Manufacturing Processes, 2020, 58: 1115-1125.

[10]Liu J, Chen X. Study on the relationship between surface error and optical performance for polymer optical lenses [J]. OptikInternational Journal for Light and Electron Optics, 2019, 163119.

[11]Michaeli W, Heβner S, Klaiber F, et al. Geometrical accuracy and optical performance of injection moulded and injectioncompression moulded plastic parts [J]. CIRP AnnalsManufacturing Technology, 2007, 56(1): 545-548.

[12]Vu L T, Chen C C A, Lee C C, et al. Compensating additional optical power in the central zone of a multifocal contact lens forminimization of the shrinkage error of the shell mold in the injection molding process [J]. Applied Optics, 2018, 57(12): 2981-91.

[13]Fang F, Zhang N, Zhang X. Precision injection molding of freeform optics [J]. Advanced Optical Technologies, 2016, 5(4): 303-324.

[14]Fischler M S, Campbell D, Atac R, et al. Application of large headbox aircraft transparency distortion measurement and compensation for improved cueing in helmetmounted displays [J]. Optical Engineering, 2017, 56(5): 051403.

[15]陈宇宏, 袁渊, 刘小艳,等. 注射成型和注射压缩成型透明件的光学性能对比与分析 [J]. 航空材料学报, 2011, 31(2): 55-60.

Chen Y H, Yuan Y, Liu X Y, et al. Comparison on optical properties of injection molded and injection compression molded transparencies[J]. Journal of Aeronautical Materials, 2011, 31(2): 55-60.

[16]陈宇宏, 袁渊, 张宜生, 等. 基于光学畸变要求的注射成型透明平板应力翘曲分析 [J]. 航空材料学报, 2008, 28(6): 82-87.

Chen Y H, Yuan Y, Zhang Y S, et al. Residual stresses, warpage and shrinkage analysis of injection molded transparent panel based on optical distortion [J]. Journal of Aeronautical Materials,2008, 28(6): 82-87.

[17]宋满仓, 张朋, 张志强, 等. 非球面透镜注射压缩成型多级注射参数研究 [J]. 塑料科技, 2015, 43(7): 62-66.

Song M C, Zhang P, Zhang Z Q, et al. Study on multistage injection parameters for injection compression moulding of aspheric lenses [J]. Plastics Science and Technology, 2015, 43(7): 62-66.

[18]Lakshminarayanan V, Fleck A. Zernike polynomials: A guide [J]. Journal of Modern Optics, 2011, 58(7): 545-561.

服务与反馈：

【文章下载】【加入收藏】