锻压技术

棒材三辊孔型自由宽展流动模型

英文标题：Flow model of free spread in threeroll passes of rod

作者：常彬彬帅美荣刘鑫

单位：太原科技大学

分类号：TG335.6

出版年,卷(期):页码：2021,46(11):207-214

摘要：

棒材三辊成形具有在短时间内实现控温连轧、在交变应力作用下发生累积大变形的特征，尤其适合于变形温度区间窄、变形抗力高的金属连续成形。金属塑性形变规律的研究对于连续轧制稳定性、产品精确成形和优异综合性能具有重要影响。通过数值模拟研究TC4钛合金棒材在三辊连轧过程中金属塑性应变和辊缝区域金属流动的规律，结合孔型宽展计算公式，进一步完善构建不同孔型系统辊缝区域金属质点的自由宽展流动模型，从而能够精确表征变形体的几何轮廓和出口横断面积。并在三辊轧机上进行TC4钛合金棒材连轧试验，获取的试验样品尺寸精度检测结果与模拟结果吻合较好。因此，建立的自由宽展流动模型有效地提高了棒材连轧成形的稳定性和成材率，为高性能材料制备提供理论依据。

The three-roll forming of rod has the characteristics of achieving temperature-controlled continuous rolling in a short time and accumulating large deformation under the action of alternative stress, and it is especially suitable for continuous forming of metal with narrow deformation temperature range and high deformation resistance. Therefore, the study on the law of metal plastic deformation has an important influence on the stability of continuous rolling, accurate forming of product and excellent comprehensive performance. Then, during the three-roll continuous rolling process, the plastic strain and the flow law in the roll gap area of TC4 titanium alloy rod were studied by the numerical simulation method, and combined with the calculation formula of pass spread, the free spread flow model of metal particles in the roll gap area of different pass systems was further reconstructed, which could accurately characterize the geometric contours of deformable body and the cross-sectional area of outlet. Furthermore, the continuous rolling tests of TC4 titanium alloy rod were carried out on the three-roll mill, and the dimensional accuracy of sample from the experimental results was in good agreement with the simulation results. Thus, the established free spread flow model could effectively improve the forming stability and yield of rod continuous rolling to provide the theoretical basis for the preparation of high-performance materials.

基金项目：

山西省重点研发计划(201903D121043)；山西省重点研发计划重点项目(201703D11103)；山西省应用基础研究计划(201901D211312)

作者简介：常彬彬（1995-)，女，硕士研究生，E-mail：1935879895@qq.com；通信作者：帅美荣(1978- )，女，博士，教授，E-mail：ruoxin2001@163.com

参考文献：

[1]许国栋, 王桂生.钛金属和钛产业的发展[J].稀有金属，2009,33(6):903-911.

Xu G D, Wang G S. Development of titanium and its industry [J]. Chinese Journal of Rare Metals, 2009,33(6):903-911.

[2]周民, 马靳江,杨军波.三辊减定径多道次孔型热力耦合有限元分析[J].金属材料与冶金工程, 2019,(1):33-37.

Zhou M, Ma J J, Yang J B.Coupled analysis of threeroll reducing and sizing multipass groove rolling process [J]. Metal Materials and Metallurgy Engineering, 2019, (1): 33-37.

[3]李小龙, 程卫国, 周立新,等. Φ16 mm GCr15轴承钢棒材KOCKS轧机热连轧工艺数值模拟和分析[J]. 特殊钢, 2016, 37(5):5-9.

Li X L, Cheng W G, Zhou L X, et al. Numerical simulation and analysis on hot continuous rolling process of KOCKS mill for Φ16 mm GCr15 bearing steel bar [J]. Special Steel, 2016, 37(5):5-9.

[4]程知松, 周倩如, 余伟. 棒材三辊减定径机组轧件变形过程数值模拟[J]. 轧钢, 2016, 33(3):33-38.

Cheng Z S, Zhou Q R, Yu W. Numerical simulation of the workpiece’s deformation process of the 3high reducing and sizing block for bar [J]. Steel Rolling, 2016, 33(3): 33-38.

[5]谢红飙，任忠凯，许秀梅,等.棒线材三辊连续减定径机组力能及工艺参数设计[J].塑性工程学报,2017,24(4):42-46，61.

Xie H B, Ren Z K, Xu X M, et al. Mechanical and process parameters design of 3roll reducing and sizing block for bar and wire [J]. Journal of Plasticity Engineering, 2017, 24(4): 42-46，61.

[6]贡特·施耐尔, 和前进.用于优质特钢棒材生产的先进三辊技术及其最新进展[A].2012年全国轧钢生产技术会论文集(下) [C].宁波,2012.

Günther Schnell,He Q J.Advanced 3roll technology for SBQ production and its recent development [A]. 2012 National Rolling Production Technology Conference Proceedings：Part 2[C]. Ningbo，2012.

[7]Ammerling W J,Filippini S A,Connell P E. Operational benefits of Kocks 3roll reducing and sizing block for rolling close tolerance SBQ[A]. Proceedings of the 10th International Conference on Steel Rolling[C]. Beijing,2010.

[8]孙付涛，韩晨.TC4钛合金板带高温成形性能研究[J].有色金属材料与工程,2017,38(4):204-209.

Sun F T,Han C. Study on high temperature forming performance of TC4 titanium alloy strip [J]. Nonferrous Metal Materials and Engineering, 2017,38(4):204-209.

[9]王永哲,张晓冬,张鹏,等.轧制变形量对TC4钛合金棒材组织及力学性能的影响[J].钛工业进展,2013,30(6):22-25.

Wang Y Z, Zhang X D, Zhang P, et al.Effect of rolling deformation on the microstructures and mechanical properties of TC4 titanium alloy bars[J]. Titanium Industry Progress, 2013, 30(6): 22-25.

[10]王悦，江莉莉.基于DEFORM3D的TC17钛合金棒材三辊螺旋轧制过程模拟及其应用[J].稀有金属与硬质合金，2016, 44 (5): 70-73.

Wang Y, Jiang L L. Simulation of threeroll spiral rolling process of TC17 titanium alloy rod based on DEFORM3D and its application[J]. Rare Metals and Cemented Carbides， 2016, 44 (5): 70-73.

[11]叶力平, 秦建平.钛合金棒材连轧变形过程分析及孔型优化设计[J].稀有金属材料与工程,2015,44(8):2058-2062.

Ye L P, Qin J P.Deformation process analysis and pass optimum design for continuous rolling of titanium alloy bars[J].Rare Metal Materials and Engineering,2015,44(8):2058-2062.

[12]毛飞龙. TC4钛合金热力学行为及棒材三辊轧制工艺参数研究[D].太原：太原科技大学,2013.

Mao F L.Research on Thermodynamic Behavior of Tc4 Titanium Alloy and Threeroll Rolling Process Parameters of Rod[D].Taiyuan：Taiyuan University of Science and Technology, 2013.

[13]张翥, 谢水生,赵云豪.钛材塑性加工技术[M].北京：冶金工业出版社,2010.

Zhang Z,Xie S S, Zhao Y H. Plastic Processing Technology of Titanium[M].Beijing：Metallurgical Industry Press, 2010.

[14]张翥, 王群骄,莫畏.钛的金属学和热处理[M].北京：冶金工业出版社,2009.

Zhang Z,Wang Q J,Mo W. Metallography and Heat Treatment of Titanium[M].Beijing：Metallurgical Industry Press,2009.

[15]徐勇. 轧制态TC4 钛合金α+β两相区热变形行为及其低温超塑性研究[D].南昌：南昌大学,2018.

Xu Y. Hot Deformation Behavior and low Temperature Superplasticity of Rolled TC4 Titanium Alloy in the α+β Phase Field[D]. Nanchang：Nanchang University,2018.

[16]张小勇, 陈果,周家林.热连轧圆钢成品孔型的有限元分析[J].武汉科技大学学报,2010,33(4):371-375.

Zhang X Y, Chen G,Zhou J L.FEM analysis of the finished groove in hotrolled round steel[J]. Journal of Wuhan University of Science and Technology, 2010,33(4):371-375.

[17]帅美荣. 钛合金棒材三辊热连轧过程变形机理与技术研究[D].太原：太原科技大学,2012.

Shuai M R.Study on Deformation Mechanism and Technique of Titanium Alloy Rod During Threeroll Hot Continuous Rolling Process[D].Taiyuan： Taiyuan University of Science and Technology,2012.

[18]杜金龙. 高精度扁钢轧制金属流动规律的数值模拟研究[D].唐山：华北理工大学,2016.

Du J L.Numerical Simulation Research on Metal Flow Law of Flat Steel Rolling with High Precision[D].Tangshan：North China University of Science and Technology,2016.

[19]Shuai M R,Huang Q X,Zhu Y C,et al.Spread model for TC4 alloy rod during the threeroll tandem rolling process[J]. Rare Metal Materials and Engineering,2013,42(5):909-913.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】