锻压技术

自由锻锤自动化控制技术

英文标题：Automatic control technology of free forging hammer

作者：陈柏金张连华马海军谢朝阳颜笑鹏

单位：华中科技大学中科聚信洁能热锻装备研发股份有限公司江苏华威机械制造有限公司贵阳精恒机电科技有限公司

分类号：TG315

出版年,卷(期):页码：2021,46(11):215-218

摘要：

通过对液气自由锻锤和全液压自由锻锤的主控阀特点及其控制原理进行分析，提出了采用电液伺服控制系统替代目前使用的机械杠杆机构操纵手动随动滑阀系统，实现了自由锻锤的动作控制及远程控制；增加锤头位置检测传感器，实现了自由锻锤的自动控制。通过AMESim仿真软件，对3种不同伺服油缸组成的电液伺服控制系统的响应特性与工作特性进行了研究，并在8 t全液压自由锻锤上进行应用，改善了锻锤生产条件、降低了劳动强度，实现了自由锻锤生产过程的自动化。

By analyzing the characteristics and control principles of the main control valve for pneumohydraulic free forging hammer and all-hydraulic free forging hammer, it was proposed to use an electro-hydraulic servo control system to replace the currently used mechanical lever mechanism to manipulate the manual follow-up slide valve system and realize the action control and the remote control of the free forging hammer, and the hammer head position detection sensor was added to realize the automatic control of the free forging hammer. Furthermore, the response and working characteristics of the electro-hydraulic servo control system composed of three different servo cylinders were studied by simulation software AMESim, and the application was conducted on an 8 t full hydraulic free forging hammer, which improved the production conditions of forging hammer and reduced the labor intensity to realize the automation of the free forging hammer production process.

基金项目：

作者简介：陈柏金（1965-），男，博士，教授，E-mail：chenbaijin@sina.com

参考文献：

[1]胡大勇, 夏德仕.新型全液压自由锻锤[A].中国锻压协会.中国国际自由锻会议2010论文集[C].成都，2010.

Hu D Y, Xia D S. Novel allhydraulic free forging hammer[A]. China Forging Association. Proceedings of China International Open Forging Conference 2010[C]. Chengdu, 2010.

[2]谢苗, 毛君,梁晗,等.液气锤有效打击时间与控制方法研究[J].机械科学与技术, 2012, 31(12): 2034-2038.

Xie M, Mao J, Liang H, et al. Research about the effective forging time of fluidair hammer and control method[J]. Mechanical Science and Technology for Aerospace Engineering, 2012, 31(12): 2034-2038.

[3]陈柏金, 张连华,马海军,等.程控电液自由锻锤[J].锻压装备与制造技术，2020，55(6)：16-19.

Chen B J, Zhang L H, Ma H J, et al. Electrohydraulic free forging hammer controlled by program[J]. China Metalforming Equipment & Manufacturing Technology, 2020, 55(6): 16-19.

[4]金文明, 马文元,杨慎华.50 kJ液压模锻锤打击能量仿真研究[J].锻压装备与制造技术, 2008，43(5): 90-92.

Jin W M, Ma W Y, Yang S H. The simulation research on blowing energy of 50 kJ hydraulic die forging hammer[J]. China Metalforming Equipment & Manufacturing Technology, 2008，43(5): 90-92.

[5]郭艳萍, 李永堂,雷步芳.大吨位电液锤的液压控制系统及其动态性能分析[J].机械工程与自动化, 2007，(1): 38-40.

Guo Y P, Li Y T, Lei B F. Hydraulic control system of largetonnage electrohydraulic hammer and the analysis of the dynamical characteristics[J]. Mechanical Engineering & Automation, 2007，(1): 38-40.

[6]代元梅. 50 kJ液压模锻锤控制系统的研究[D].长春：吉林大学, 2014.

Dai Y M. The Research on Control System of 50 kJ Hydraulic Die Forging Hammer[D]. Changchun: Jilin University, 2014.

[7]Espinoza E. Optimizing a Hammer Forging Progression for a Large Hand Tool[D].Milwaukee: Marquette University, 2015.

[8]Ghaei A, Movahhedy M R. Die design for the radial forging process using 3D FEM[J]. Journal of Materials Processing Technology,2006，182(1-3):534-539.

[9]Jonas H. Influence of friction on die filling in counterblow hammer forging[J]. Journal of Material Processing Technology, 2000,108(1): 21-25.

[10]任廷鸿，张我华，薛新华. 锻锤冲击下地基土的疲劳损伤研究[J].水利学报，2013，44（2）：191-197.

Ren T H, Zhang W H, Xue X H. Study on the fatigue damage characteristics of foundation soil under hammer blows[J]. Journal of Hydraulic Engineering, 2013, 44（2）：191-197.

[11]Lavrinenko V Y, Shagaleev R R. Practical investigation into piercing process using forging hammer head with filling[J]. Materials Today Proceedings, 2019, 19:1823-1825.

[12]Ivanov Y V. Ways of reducing aerodynamic noise from forging hammers[J]. Metallurgist, 2009,53(5-6):251-254.

服务与反馈：

【文章下载】【加入收藏】