网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
基于工具头往复运动加工的数控渐进成形轨迹生成
英文标题:CNC incremental forming trajectory generation based on reciprocating movement machining of tool head
作者:冯辉 郑博 谢云 李彩云 后柏宇 赵佩 汤炜晨 
单位:成都飞机工业(集团)有限责任公司 
关键词:数控渐进成形 往复运动 成形轨迹 轮廓精度 材料流动 最大应力 
分类号:TG335.5
出版年,卷(期):页码:2021,46(12):117-121
摘要:

 针对传统的成形工具沿着一个方向运动的数控渐进加工轨迹容易造成材料沿着一个方向流动从而导致成形板材发生破裂的问题,提出了一种基于成形工具往复运动的数控渐进成形轨迹。利用有限元分析软件ANSYS对成形工具沿着一个方向运动和往复运动的数控渐进成形轨迹进行了仿真。结果表明:基于成形工具沿着一个方向运动和成形工具往复运动下,成形后板材的Z向偏差值的平均值与最大值分别为0.19170.39470.14370.3412 mm,后者成形轨迹下板材成形后的轮廓精度更高;另外,相对于前者,后者轨迹下成形后板材的内部材料流动量更小,成形的板材更不容易破裂;最后,前者和后者成形轨迹下,板材成形后的最大应力分别为79.661.4 Pa,相对于前者成形轨迹,后者成形轨迹能够降低板材成形过程中的应力。

 Aiming at the problem that the CNC incremental forming trajectory with traditional forming tool moving along one direction causes the material to flow along one direction easily so as to make the formed sheet break, a CNC incremental forming trajectory based on the reciprocating movement of the forming tool was proposed, and the CNC incremental forming trajectories with the forming tool moving along one direction and reciprocating movement were simulated by finite element analysis software ANSYS. The results show that the average and the maximum Z direction deviation values of sheet after forming based on the forming tool moving along one direction and reciprocating movement are 0.1917, 0.3947 and 0.1437, 0.3412 mm, respectively, and the latter forming trajectory has a higher profile accuracy after the sheet is formed. In addition, compared with the former, the inner material flow amount of the formed part under the latter trajectory is smaller, and the formed part is less likely to be broken. Finally, the maximum stresses of the sheet after forming under the former and latter trajectories are 79.6 and 61.4 Pa, respectively. Thus, compared with the former forming trajectory, the latter forming trajectory can reduce the stress during the sheet forming process.

基金项目:
作者简介:
冯辉 (1992-),男,硕士,工程师 E-mail:996364795@qq.com
参考文献:

 [1]Li Y LChen X XLiu Z Bet al. A review on the recent development of incremental sheetforming process[J]. The International Journal of Advanced Manufacturing Technology, 2017925/8):2439-2462.


[2]Xiao D XZhu H. Finite element analysis of the double sided incremental forming of the bidirectional convex features[J]. Machine Tool and Hydraulics2020486):36-40.


[3]Micari FAmbrogio GFilice L. Shape and dimensional accuracy in single point incremental forming state of the art and future trends[J]. Journal of Materials Processing Technology2007191(1-3):390-395.


[4]赵仕宇, 周超,詹艳然. 5052铝合金薄板数控渐进成形制件表面质量分析[J]. 塑性工程学报,2018256):34-40.


Zhao S YZhou CZhan Y R. Surface quality analysis of CNC incremental forming of 5052 aluminum alloy sheet[J]. Journal of Plastic Engineering2018256):34-40.


[5]   高锦张, 曹宇,贾俐俐.单道次渐进成形圆孔翻边的数值模拟[J]. 塑性工程学报,2015223):79-85.


 


Gao J ZCao YJia L L. Numerical simulation of round hole flanging in single pass incremental forming[J]. Journal of Plastic Engineering2015223):79-85.


 


[6]   Ambrogio GCostantino IDe Napoli Let al. Influence of some relevant process parameters on the dimensional accuracy in incremental forming:a numerical and experimental investigation[J]. Journal of Materials Processing Technology2004 153-1541):501-507.


 


[7]   莫健华, 丁勇,黄树槐. 金属板材数控单点渐进成形加工轨迹优化研究[J]. 中国机械工程,20031424):75-77.


 


Mo J HDing YHuang S H. Research on tool path optimization of sheet metal numerical control single point incremental forming[J]. China Mechanical Engineering20031424):75-77.


 


[8]   韦红余, 胡铭明,高霖,等. 圆锥形渐进成形制件成形精度研究[J]. 机械工程学报,2010469):193-198.


 


Wei H YHu M MGao Let al. Investigation on forming accuracy of cone type sheet metal incremental forming parts[J]. Journal of Mechanical Engineering2010469):193-198.


 


[9]   Moser NZhang ZRen Het al. Effective forming strategy for doublesided incremental forming considering inplane curvature and tool direction[J]. CIRP AnnalsManufacturing Technology2016651):265-268.


 


[10]朱虎, 肖冬选,姜在宽. 基于STL模型的双面数控渐进成形干涉检查与修正[J]. 中国机械工程,20193023):2890-2897.


 


Zhu HuXiao D XKang Jaeguan. STL modelbased doublesided CNC incremental forming interference inspection and correction[J]. China Mechanical Engineering20193023):2890-2897.


 


 


[11]Lingam RPrakash OBelk J Het al. Automatic feature recognition and tool path strategies for enhancing accuracy in double sided incremental forming[J]. International Journal of Advanced Manufacturing Technology2016885-8):1-17.


服务与反馈:
文章下载】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管  中国机械总院集团北京机电研究所有限公司 中国机械工程学会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9