锻压技术

大径厚比薄壁变曲率构件充液拉深成形技术

英文标题：Hydro-drawing technology for thin-walled variable curvature part with large diameter to thickness ratio

单位：1. 嘉兴职业技术学院 2. 上海航天精密机械研究所 3. 哈尔滨工业大学

分类号：TN911.73；TP391.9

出版年,卷(期):页码：2022,47(4):126-133

摘要：

为提高大径厚比变曲率薄壁件的成形质量，对充液拉深技术开展了分析，利用CAE技术和试验相结合的方法，分析了充液拉深过程中材料变形机理和工艺参数的影响规律。为成形良好产品，分析了板料尺寸、液室压力及圆角半径等参数对成形的影响，并通过试验得到优化的工艺参数，同时设计了带α角的分体模具结构，实现了降低压边力、减小起皱风险、减少液体容积的有益效果。结果表明，当板料尺寸为Φ1250 mm，液室压力为5~7 MPa，圆角半径为30 mm时，成功研制了变曲率构件并通过了尺寸检验，产品的外形尺寸精度由0.8 mm提升至0.4 mm，并降低了零件的减薄率，为薄壁构件精密制造水平的提升提供了技术支持。

In order to improve the forming quality of thin-walled variable curvature part with large diameter to thickness ratio，the hydro-drawing technology was analyzed, and the deformation mechanism of material and the influencing laws of process parameters were investigated by the method of combining CAE technology and experiment. Then, in order to form a better part, the influences of parameters such as sheet size，chamber pressure and fillet radius on the forming were analyzed, and the process parameters were optimized by experiment. At the same time, the split die structure with angle α was designed to realize the beneficial effects of effectively reducing the blank holder force, wrinkling risk and liquid volume. The results show that the variable curvature part is successfully formed with the sheet size of Φ1250 mm，the chamber pressure of 5-7 MPa and the die fillet radius of 30 mm，and pass the dimensional inspection. The profile dimensional accuracy of product is improved from 0.8 mm to 0.4 mm and reduces the thinning ratio of part，which provides technical support for the improvement of the precision manufacturing level for thin-walled part.

基金项目：

作者简介：周永新（1969-），男，工程硕士，副教授 E-mail：764141530@qq.com

参考文献：

[1]王孝培. 实用冲压手册[M].北京: 机械工业出版社，2002.

Wang X P. Practical Stamping Manual [M]. Beijing: China Machine Press，2002.

[2]李涛，郎利辉，周贤宾.先进板材液压成形技术及其进展[J].塑性工程学报，2006，13(3): 30-34.

Li T，Lang L H，Zhou X B. Advanced sheet metal forming technology and its development[J].Journal of Plasticity Engineering，2006，13(3): 30-34.

[3]苑世剑, 刘伟,徐永超. 板材液压成形技术与装备新进展[J]. 机械工程学报，2015，51(8): 21-28.

Yuan S J, Liu W, Xu Y C. New development on technology and equipment of sheet hydroforming [J].Journal of Mechanical Engineering，2015，51(8): 21-28.

[4]李世海. 2A12 铝合金盒形件充液拉深成形过程研究[D]. 哈尔滨: 哈尔滨工业大学，2013.

Li S H.Investigation on Hydro-drawing of 2A12 Aluminum Alloy Box-shaped Part[D].Harbin: Harbin Institute of Technology，2013.

[5]Shafaat M A, Abbasi M, Ketabchi M. Investigation into wall wrinkling in deep drawing process of conical cups[J]. Journal of Materials Processing Technology，2011, 211(11): 1783-1795.

[6]杨赓，程仲文，易湘斌，等. 磁力泵隔离套充液拉深成形模拟分析[J]. 锻压技术，2020,45(4):51-56.

Yang G，Cheng Z W，Yi X B，et al. Simulation analysis of hydro-drawing for magnetic pump isolation sleeve [J]. Forging & Stamping Technology，2020,45(4): 51-56.

[7]崔丽, 张帅,赵文华,等. LF21铝合金盒型零件充液拉深成形极限[J]. 锻压技术,2021,46(11):160-167.

Cui L，Zhang S，Zhao W H，et al. Forming limit of LF21 aluminum alloy box-shaped part by hydrodynamic deep drawing[J]. Forging & Stamping Technology，2021,46(11):160-167.

[8]郎利辉. 板材充液成形先进技术[M]. 北京: 国防工业出版社, 2014.

Lang L H. Advanced Technology of Sheet Metal Filling and Forming[M].Beijing: National Defense Industry Press，2014.

[9]胡世光. 板料冷压成形的工程解析[M]. 北京: 北京航空航天大学出版社, 2004.

Hu S G.Engineering Analysis of Cold Forming for Sheet Metal [M].Beijing: Beijing University of Aeronautics and Astronautics Press，2004.

[10]Choubey A K, Agnihotri G, Sasikumar C, et al. Analysis of die angle in deep drawing process using FEM[J]. Materials Today: Proceedings,2017, 4(2, Part A): 2511-2515.

[11]苑世剑. 现代液压成形技术[M]. 北京: 国防工业出版社, 2009.

Yuan S J.Modern Hydroforming Technology[M].Beijing: National Defense Industry Press，2009.

[12]徐永超，陈宇，苑世剑.半球底筒形件充液拉深加载路径优化研究[J].哈尔滨工业大学学报，2008，40(7): 1076-1080.

Xu Y C，Chen Y，Yuan S J.Loading path optimization of hydro-mechanical deep drawing of the cup with a semi-ball bottom [J].Journal of Harbin Institute of Technology，2008，40(7): 1076-1080.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】