锻压技术

汽车齿轮轴闭塞式模锻成形工艺研究与试验

英文标题：Research and experiment on closed die forging process for automobile gear shaft

作者：周淑娟

单位：河南工业贸易职业学院

分类号：TG316.3

出版年,卷(期):页码：2022,47(5):25-32

摘要：

针对传统锻造工艺或铸造工艺生产汽车齿轮轴时效率低、质量差、寿命短的问题，根据工艺要求及齿轮轴的特征，提出了两种模锻成形工艺，即小飞边模锻成形工艺和闭塞式模锻成形工艺。通过刚塑性有限元法，利用Deform-3D软件对齿轮轴的两种模锻成形工艺进行了仿真，综合分析了材料填充规律、应力分布规律、成形力和合模力的变化规律及齿轮轴锻件的成形质量。结果显示：两种模锻成形工艺均能成形齿轮轴锻件，但是采用闭塞式模锻成形工艺获得的齿轮轴锻件的质量更好，同时也更利于模具寿命的延长。最后，通过闭塞模锻试验进行了验证，获得的齿轮轴锻件各部位均填充饱满，满足设计要求。

For the problems of low efficiency, poor quality and short service life for automobile gear shaft produced by traditional forging process or casting process, according to the process requirements and the characteristics of gear shaft, two kinds of die forging processes, namely small flash die forging process and closed die forging process, were proposed. Then, two kinds of die forging processes for gear shaft were simulated by rigid plastic finite element method and software Deform-3D, and the material filling law, the stress distribution law, the change laws of forming force and die clamping force, and the forming quality of gear shaft forgings were comprehensively analyzed. The results show that both two kinds of die forging processes can form gear shaft forgings, but the quality of gear shaft forgings obtained by closed die forging process is better, and it is also more conducive to the improvement of die life. Finally, it is verified by the closed die forging test that all parts of the obtained gear shaft forgings are fully filled and meet the design requirements.

基金项目：

南省高等教育教学改革研究项目 (2014SJGLX461)

作者简介：周淑娟（1982-），女，硕士，讲师，E-mail：jamesfu925@tom.com

参考文献：

[1]姚文俊, 陈松.汽车法兰轴结构件塑性成形工艺分析及改进[J].锻压技术,2020,45(11):7-12.

Yao W J,Chen S.Analysis and improvement on plastic forming process for structure part of automobile flange shaft[J].Forging & Stamping Technology,2020,45(11):7-12.

[2]柴民杰, 于华丽.基于ANSYS的锥齿轮轴闭式模锻数值模拟及工艺优化[J].热加工工艺,2019,48(5):151-153，157.

Chai M J,Yu H L.Numerical simulation and process optimization of closed die forging for bevel gear shaft based on ANSYS[J].Hot Working Technology,2019,48(5):151-153，157.

[3]岳鹏. 基于Deform软件的减压阀壳体模锻工艺优化[J].热加工工艺,2019,48(3):167-169，172.

Yue P.Optimization of die forging process of pressure relief valve shell based on Deform software[J].Hot Working Technology,2019,48(3):167-169，172.

[4]蒋鹏, 贺小毛,杨勇,等.国内精密塑性成形技术的发展及其在工业生产中的应用[J].模具工业,2020,46(12):11-16.

Jiang P,He X M,Yang Y,et al.Development of domestic precision plastic forming technology and its application in industrial production[J].Die & Mould Industry,2020,46(12):11-16.

[5]王贵. 摇臂轴闭塞式成形工艺数值模拟及模具设计[J].汽车零部件,2015,(11):41-43.

Wang G.Numerical simulation and mold design of the rockshaft occlusive forging process[J].Automobile Parts,2015,(11):41-43.

[6]丁川, 张志刚.汽车差速器锥齿轮精锻成形工艺及模具的改进[J].辽宁工业大学学报：自然科学版,2016,36(5):313-315.

Ding C,Zhang Z G.Improvement of precision forging process and mold for vehicles′ differential gear[J].Journal of Liaoning University of Technology：Natural Science Edition,2016,36(5):313-315.

[7]伍太宾, 马斌,张杰江.铝合金连杆体闭塞锻造成形过程的数值模拟[J].特种铸造及有色合金,2015,35(9):991-995.

Wu T B,Ma B,Zhang J J.Numerical simulation of the closed die forging process for aluminum alloy connecting rod[J].Special Casting & Nonferrous Alloys,2015,35(9):991-995.

[8]杨程, 丁伯艮,庄晓伟,等.不对称喷油器体闭塞锻造成形[J].塑性工程学报,2018,25(4):21-25.

Yang C,Ding B G,Zhuang X W,et al.Closed die forging of asymmetry fuel injector body[J].Journal of Plasticity Engineering,2018,25(4):21-25.

[9]乔硕, 刘国凯,周结魁,等.行星齿轮冷闭塞式锻造工艺数值模拟和试验研究[J].精密成形工程,2012,4(6):5-8，109.

Qiao S,Liu G K,Zhou J K,et al.The numerical simulation and experimental study of cold closed die forging process of planetray gear[J].Journal of Netshape Forming Engineering,2012,4(6):5-8，109.

[10]朱景秋, 张东民,吕雷雷,等.哈克抽芯铆钉铆套冷精锻成形工艺[J].锻压技术,2020,45(2):15-23.

Zhu J Q,Zhang D M,Lyu L L,et al.Cold precision forging process of rivet sleeve with Huck core-pulling rivet[J].Forging & Stamping Technology,2020,45(2):15-23.

[11]陈邦华, 夏玉峰,杜婉婉.汽车离合器盘毂温精锻工艺的数值模拟和实验研究[J].热加工工艺,2014,43(13):103-105.

Chen B H,Xia Y F,Du W W.Simulation and experiment study on warm forging process for auto clutches disc hub[J].Hot Working Technology,2014,43(13):103-105.

[12]魏星. 基于FEA仿真技术的闭式锻造模具结构分析[J].武汉工程职业技术学院学报,2014,26(4):9-12，29.

Wei X.An analysis on closed forging tooling structure based on FEA simulation[J].Journal of Wuhan Engineering Institute,2014,26(4):9-12，29.

[13]吴艳云, 陈剑,张东民,等.球头销多工位冷锻工艺[J].锻压技术,2020,45(1):114-124.

Wu Y Y,Chen J,Zhang D M,et al.Multi-station cold forging process of ball pin[J].Forging ＆ Stamping Technology,2020,45(1):114-124.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】