锻压技术

盘形件两工步对称增厚旋压工艺

英文标题：A two-step symmetrical thickening spinning process for disk-shaped part

作者：刘发美金俊松李斌高畅张蕾王新云

分类号：TG306

出版年,卷(期):页码：2023,48(3):43-53

摘要：

对称增厚旋压是一种针对薄辐板厚轮缘类盘形件的特种旋压技术，利用有限元模拟研究了两工步对称增厚旋压过程中坯料的变形规律、成形特点和缺陷的产生，以及各工艺参数对成形的影响。结果表明：摩擦因数μ、旋轮进给速度v以及坯料旋转速度ω对成形过程影响较小。在第1工步中，旋轮槽底宽度h、旋轮凹槽倾角α以及坯料长厚比γ对成形影响显著，随着旋轮槽底宽度h和旋轮凹槽倾角α的增大以及坯料长厚比γ越大，坯料越容易失稳形成缺陷；在第2工步中，旋轮槽底宽度h以及坯料的初始形状对成形影响显著，旋轮槽底圆角半径R能够改善坯料外边缘的应力状态，且R越大改善效果越明显。

Symmetrical thickening spinning is a special spinning process for disc-shaped parts with thin spoke and thick rim. Therefore, the deformation laws and forming characteristics of blank, the cause of defects and the influences of process parameters on forming in the two-step symmetrical thickening spinning process were studied by finite element simulation. The results show that friction coefficient μ, feeding speed v of the roller and rotation speed ω of blank have little effect on the forming process, while groove bottom width of roller h, inclination angle α of roller groove and length to thickness ratio γ of blank have sigmificant effect on the forming in the first step. With the increasing of groove bottom width of roller h and inclination angle α of roller as well as length to thickness ratio γ of blank, the blank is more prone to lose stability and form defects. Furthermore, in the second step, the groove bottom width h of roller and the initial shape of blank have significont effect on the forming. Meantime, the fillet radius R at the bottom of roller groove can improve the stress state of the outer edge of blank, and the larger the R is, the more obvious the improvement effect is.

基金项目：

国家自然科学基金资助项目（52175319）

作者简介：刘发美（1994-），男，博士研究生 E-mail：dliufamei@hust.edu.cn 通信作者：金俊松（1980-），男，博士，教授 E-mail：jsjin@hust.edu.cn

参考文献：

[1]侯红亮, 余肖放, 王耀奇. 国内旋压设备及其相关技术的发展与现状[J]. 锻压装备与制造技术, 2009,44(4):16-19.

Hou H L, Yu X F, Wang Y Q. Development of spinning equipment and its related technology in China[J]. China Metalforming Equipment & Manufacturing Technology, 2009,44(4):16-19.

[2]Wong C C, Dean T A, Lin J. A review of spinning, shear forming and flow forming processes[J]. International Journal of Machine Tools and Manufacture, 2003,43(14):1419-1435.

[3]刘建华, 杨合, 李玉强. 旋压技术基本原理的研究现状与发展趋势[J]. 重型机械, 2002,(3):1-4.

Liu J H, Yang H, Li Y Q. State of the art and trend of metal spinning technique[J]. Heavy Machinery, 2002,(3):1-4.

[4]夏琴香, 王映品, 王甲子, 等. 多楔带轮旋压成形预成形工艺参数对腰鼓成形的影响[J]. 模具工业, 2010,36(1):26-31.

Xia Q X, Wang Y P, Wang J Z, et al. Influence of preforming parameters on the drumming in multi-wedge belt pulley spinning[J]. Die & Mould Industry, 2010,36(1):26-31.

[5]Xu W C, Zhao X K, Shan D B, et al. Numerical simulation and experimental study on multi-pass stagger spinning of internally toothed gear using plate blank[J]. Journal of Materials Processing Technology, 2016,229:450-466.

[6]黄亮, 杨合, 詹梅. 分形旋压成形技术研究进展[J]. 材料科学与工艺, 2008,16(4):476-480.

Huang L, Yang H, Zhan M. Development of the research on splitting spinning[J]. Materials Science & Technology, 2008, 16(4): 476-480.

[7]刘发美, 金俊松, 王新云, 等. 带底部法兰筒形件切旋成形工艺研究[J]. 航空制造技术, 2019,62(13):30-37.

Liu F M, Jin J S, Wang X Y, et al. Study on dividing spinning process of cylindrical parts with bottom flange[J]. Aeronautical Manufacturing Technology, 2019, 62(13): 30-37.

[8]Liu F M, Jin J S, Rao W, et al. Study of dieless radial spinning for thick-walled cylindrical parts with external grooves[J]. The International Journal of Advanced Manufacturing Technology, 2021,117(3-4):1163-1178.

[9]Jin J J, Wang X Y, Li L. A sheet blank rotary forging process for disk-like parts with thickened rims[J]. Journal of Mechanical Science and Technology, 2016,30(6):2723-2729.

[10]Kim Y J, Park J S, Cho C. Study on edge thickening flow forming using the finite elements analysis[A]. AIP Conference Proceedings[C]. American Institute of Physics, 2011.

[11]Jin J S, Deng L, Wang X Y, et al. A new rotary forming process for rim thickening of a disc-like sheet metal part[J]. Journal of Materials Processing Technology, 2012,212(11):2247-2254.

[12]Wang X Y, Li L, Deng L, et al. Effect of forming parameters on sheet metal stability during a rotary forming process for rim thickening[J]. Journal of Materials Processing Technology, 2015,223:262-273.

[13]Wang X Y, Jin J S, Hu Y Z, et al. Study on the rotary forming process of a rim-thickened disc-like part using a local heating method[J]. International Journal of Mechanical Sciences, 2017,131-132:252-264.

[14]Jin J S, Wang S L, Tang X F, et al. Research on a multi-step spinning process for manufacturing disc-like part with thickened rim[J]. Archives of Civil and Mechanical Engineering, 2022,22(1):1-14.

[15]Xue K M, Yang W Z, Yan S L, et al. Forming defect control and optimization of multi-step spinning thickening process considering the variation of spinning gap[J]. The International Journal of Advanced Manufacturing Technology, 2019,101(518):1183-1196.

[16]王炜. 单工步盘形件旋压对称增厚工艺的研究[D]. 武汉：华中科技大学, 2017.

Wang W. Research on a Single-step Spinning Process for Symmetrical Thickening of Disk-like Parts[D]. Wuhan: Huazhong University of Science and Technology, 2017.

[17]吴文魁. 盘形件轮缘热旋压对称增厚成形研究[D]. 武汉：华中科技大学,2018.

Wu W K. Study of a Rotary Forming Process for Symmetric Rim Thickening of Disc-like Parts under Heating Condition[D]. Wuhan: Huazhong University of Science and Technology, 2018.

[18]魏刚, 张伟, 邓云飞. 基于J-C模型的45钢本构参数识别及验证[J]. 振动与冲击, 2019,38(5):173-178.

Wei G, Zhang W, Deng Y F. Identification and validation of constitutive parameters of 45 steel based on J-C model[J]. Journal of Vibration and Shock, 2019, 38(5): 173-178.

[19]Taherizadeh A, Ghaei A, Green D E, et al. Finite element simulation of springback for a channel draw process with drawbead using different hardening models[J]. International Journal of Mechanical Sciences, 2009,51(4):314-325.

服务与反馈：

【文章下载】【加入收藏】