锻压技术

FGH4096高温合金的动态再结晶行为

英文标题：Dynamic recrystallization behavior for superalloy FGH4096

作者：刘剑箫姜超翟月雯周乐育金红

分类号：TG166.7

出版年,卷(期):页码：2023,48(7):242-248

摘要：

以真空等温锻造过程中再结晶组织的精细化和均质化调控为目标，在Gleeble3500热模拟试验机上进行热模拟压缩试验，分析变形温度为1020~1140 ℃、应变速率为0.001~1 s-1、应变量为60%条件下FGH4096高温合金的高温变形行为。构建了FGH4096高温合金的动态再结晶体积分数模型和平均晶粒尺寸模型，揭示了合金热变形过程中动态再结晶组织演化规律，确定最佳工艺参数，通过控制加工窗口进而实现对微观组织的控制。试验结果表明，材料的临界应变随着变形温度的升高而降低，随着应变速率的增加而增加。原始组织的晶粒度为6级，当70.32＜lnZ＜75.57时，动态再结晶百分数大于90%；当72.62<lnZ<74.93时，再结晶平均晶粒尺寸的晶粒度为8级以上，获得均匀且细小的组织。

Aiming at the refinement and homogenization control of the recrystallized microstructure in the vacuum isothermal forging process, the thermal simulation compression tests were conducted on Gleeble3500 thermal simulation tester, and the high temperature deformation behavior of alloy under the conditions of deformation temperature of 1020-1140 ℃, strain rate of 0.001-1 s-1 and strain amount of 60% was analyzed. Then, the dynamic recrystallization volume fraction model and average grain size model of superalloy FGH4096 were constructed, and the evolution laws of dynamic recrystallization microstructure during the thermal deformation process of the alloy was revealed. Furthermore, the optimal process parameters were confirmed, and the control of microstructure was realized by controlling the processing window. The experimental results show that the critical strain of the material decreases with increasing of the deformation temperature and increases with increasing of the strain rate. The grain size of the original structure is Grade 6, when lnZ is in the rang of 70.32-75.57, the dynamic recrystallization percentage is more than 90%. When lnZ is in the range of 72.62-74.93, the grain size of recrystallization average grain size is above Grade 8, resulting in uniform and fine structure.

基金项目：

中国机械科学研究总院技术发展基金项目

作者简介：刘剑箫（1992-），女，硕士，工程师 E-mail：woshiliujianxiao@126.com 通信作者：姜超（1979-），男，博士，研究员 E-mail：jiangchao@139.com

参考文献：

[1]Liu C Z, Liu F, Huang L,et al.Effect of hot extrusion and heat treatment on microstructure of nickelbase superalloy [J]. Transactions of Nonferrous Metals Society of China, 2014, 24(8): 2544-2553.

[2]Doherty R D, Hughes D A, Humphreys F J, et al. Current issues in recrystallization: A review[J]. Materials Science & Engineering A, 1997,238(2):219-274.

[3]宁永权, 李辉, 姚泽坤, 等. FGH96高温合金的再结晶组织特征[J]. 稀有金属材料与工程, 2016, 45(5): 1225-1229.

Ning Y Q, Li H, Yao Z K, et al. Recrystallization organization characteristics of FGH96 hightemperature superalloy[J]. Rare Metal Materials and Engineering, 2016, 45(5): 1225-1229.

[4]李福林,付锐,白云瑞,等.初始晶粒尺寸和强化相对GH4096高温合金热变形行为和再结晶的影响[J/OL].金属学报:1-17[2023-06-13].http://kns.cnki.net/kcms/detail/21.1139.TG.20230322.1056.018.html

Li F L, Fu R, Bai Y R, et al. Influence of initial grain size and strengthening on the thermal deformation behavior and recrystallization of GH4096 high temperature superalloy[J/OL]. Acta Metallurgica Sinica: 1-17[2023-06-13].http://kns.cnki.net/kcms/detail/21.1139.TG.20230322.1056.018.html

[5]谢兴华, 姚泽坤, 宁永权, 等. FGH4096粉末高温合金的热变形行为[J]. 稀有金属材料与工程, 2012, 41(1): 82-86.

Xie X H, Yao Z K, Ning Y Q, et al. Thermal deformation behavior of FGH4096 powdered hightemperature superalloy[J]. Rare Metal Materials and Engineering, 2012, 41(1): 82-86.

[6]刘建涛, 张义文, 陶宇, 等. FGH96合金动态再结晶行为的研究[J]. 材料热处理学报, 2006,(5): 46-50,132.

Liu J T, Zhang Y W, Tao Y, et al. Study of dynamic recrystallization behavior of FGH96 superalloy[J]. Transactions of Materials Heat Treatment, 2006,(5): 46-50,132.

[7]黄钲钦, 王岩, 刘敏学, 等. 变形参数对FGH96合金热机械处理组织与性能的影响[J]. 中国有色金属学报, 2021, 31(7): 1842-1855.

Huang J Q, Wang Y, Liu M X, et al. Influence of deformation parameters on the microstructure and properties of thermomechanically treated FGH96 alloy[J]. The Chinese Journal of Nonferrous Metals, 2021, 31(7): 1842-1855.

[8]Poliak E I, Jonas J J. Initiation of dynamic recrystallization in constant strain rate hot deformation[J]. ISIJ International, 2003, 43(5): 684-691.

[9]万志鹏, 孙宇, 胡连喜, 等. TiAl基合金动态再结晶临界模型建立[J]. 稀有金属材料与工程, 2018, 47(3): 835-839.

Wan Z P, Sun Y, Hu L X, et al. Establishment of a critical model for dynamic recrystallization of TiAlbased alloys[J]. Rare Metal Materials and Engineering, 2018, 47(3): 835-839.

[10]Sellars C M, Whiteman J A. Recrystallization and grain growth in hot rolling[J]. Metal Science, 1979, 13(3-4): 187-194.

[11]Zener C, Hollomon J H. Effect of strain rate upon plastic flow of steel[J]. Journal of Applied Physics, 1944, 15(1): 22-32.

[12]吴志强, 邓偲瀛, 刘欢, 等. Zr1.0Sn1.0Nb0.1Fe合金热变形行为及动态再结晶模型建立[J]. 稀有金属材料与工程, 2022, 51(7): 2599-2607.

Wu Z Q, Deng S Y, Liu H, et al. Thermal deformation behavior and dynamic recrystallization modeling of Zr-1.0Sn-1.0Nb-0.1Fe alloy[J]. Rare Metal Materials and Engineering, 2022, 51(7): 2599-2607.

服务与反馈：

【文章下载】【加入收藏】