网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
含NiAl涂层的TC4钛合金板材的拉伸失效机理
英文标题:Tensile failure mechanism on TC4 titanium alloy sheet containing NiAl coating
作者:郑晖1 孙凌崴1 韩颖杰2 付和国2 谢洪志2 张帅2 赵天章1 
单位:1.沈阳航空航天大学 航空宇航学院 2.沈阳飞机工业(集团)有限公司 
关键词:NiAl涂层  TC4钛合金  失效模型  开裂  脱粘 
分类号:TG174.4
出版年,卷(期):页码:2023,48(10):46-52
摘要:

 利用等离子喷涂技术在TC4钛合金零件表面制备涂层是常见的增强钛合金性能的方法,但变形时涂层的失效机理尚不明确。通过室温拉伸试验测试了含NiAl涂层的TC4钛合金板材的力学性能,深入分析了各阶段力学行为的特点。通过金相显微镜观察了涂层中的裂纹,明确了涂层的失效原因,并建立了单向拉伸涂层的失效模型。结果表明:涂层的失效是由开裂和脱粘引起的,开裂是在涂层的厚度方向贯穿涂层的裂纹,脱粘是基体与涂层的机械结合失效导致的分离。开裂和脱粘是涂层失效过程的两个阶段:开裂发生在拉伸前期的弹性阶段,在应力的作用下在涂层中的缺陷处或涂层表面开裂;而脱粘主要发生在拉伸后期的塑性阶段,涂层与基体的结合失效导致涂层脱落。涂层的周期性开裂导致弹性阶段的应力-应变曲线呈现周期性的台阶形状,塑性阶段涂层的脱粘与开裂相遇导致部分涂层残留在基体上。

 Using plasma spraying technology to prepare coatings on the surface of TC4 titanium alloy parts is a common method to enhance the properties of titanium alloy, but the mechanism of coating failure during deformation is not clear. Therefore, the mechanical properties of NiAl-coated TC4 plate were tested through tensile tests at room temperature, and the characteristics of the mechanical behavior at each stage were analyzed in depth. Then, the cracks in the coating were observed by metallography microscope, the cause of coating failure was clarified, and a uniaxial tensile coating failure model was established. The results show that the failure of coating is caused by cracking and debonding. The cracking is the crack that runs through the thickness of coating, and the debonding is the separation caused by the mechanical bonding failure between matrix and coating. Cracking and debonding are two stages of the coating failure process. Cracking occurs in the elastic stage during the early stage of stretching, which occurs at defects in the coating or on the surface of coating under the action of stress, while debonding mainly occurs in the plastic stage during the later stage of stretching, the bonding failure between coating and substrate leads to the coating to fall off. The periodic cracking of coating causes the stress-strain curve in the elastic stage to show a periodic step shape, while the debonding and cracking of the coating in the plastic stage lead to part of the coating remaining on matrix.

基金项目:
国家自然科学基金青年科学基金项目(51605310);辽宁省教育厅项目(LJKZ0180);沈阳市中青年科技创新人才支持计划(RC210422)
作者简介:
郑晖(1976-),女,博士,副教授 E-mail:912108730@qq.com
参考文献:

 
[1]刘道新, 汤金钢, 张晓化,等. 离子渗ZrN与喷丸复合对TC4合金疲劳行为的影响
[J]. 稀有金属材料与工程, 2018, 47(7): 2137-2143.


Liu D X, Tang J G, Zhang X H, et al. Effect of ionizing ZrN and shot peening on fatigue behavior of TC4 alloy
[J]. Rare Metal Materials and Engineering, 2018, 47(7): 2137-2143.


[2]Li R,Gu Y, Zeng F H. High temperature diffusion behavior between Ta10W coating and CPTi and TC4 alloy
[J]. Surface & Coatings Technology, 2021, 406: 1-10.


[3]姜沐池, 任德春, 蔡雨升,等. 硼含量对激光熔覆沉积TC4钛合金显微组织与力学性能影响
[J]. 稀有金属材料与工程, 2022, 51(10): 3777-3784.

Jiang M C, Ren D C, Cai Y S, et al. Effect of boron content on microstructure and mechanical properties of TC4 titanium alloy deposited by laser cladding
[J]. Rare Metal Materials and Engineering, 2022, 51(10): 3777-3784.


[4]侯红苗, 秦成, 潘浩,等. 超低间隙TC4DT钛合金厚板显微组织与力学性能研究
[J]. 钛工业进展 2022, 39(5): 1-5.

Hou H M, Qin C, Pan H, et al. Study on microstructure and mechanical properties of ultralow clearance TC4DT titanium alloy thick plate
[J]. Titanium Industry Progress,2022, 39(5): 1-5.


[5]孙中豪, 邢淑清,程桥,等. 脉冲磁场对TC4钛合金析出行为及力学性能的影响
[J]. 稀有金属材料与工程, 2022, 51(9): 3335-3344.

Sun Z H, Xing S Q, Cheng Q, et al. Effect of pulsed magnetic field on precipitation behavior and Mechanical properties of TC4 titanium alloy
[J]. Rare Metal Materials and Engineering, 2022, 51(9): 3335-3344.


[6]董宇, 刘梅君, 徐彤,等. 航空发动机压气机防钛火可磨耗封严涂层的研究进展
[J]. 材料保护, 2021, 54(11): 129-138.

Dong Y, Liu M J, Xu T, et al. Research progress of antititanium fire wear sealing coating for aeroengine compressor
[J]. Materials Protection, 2021, 54(11): 129-138.


[7]王楠楠, 任柯旭, 邱然锋. 钛及钛合金表面自纳米化技术研究现状
[J]. 热加工工艺, 2023, 52(14): 19-23.

Wang N N, Ren K X, Qiu R F. Research status of surface selfnano technology of titanium and titanium alloys
[J]. Hot Working Technology, 2023, 52(14): 19-23.


[8]Yan H J, Tai Z F, Wu L K. Improved hightemperature oxidation resistance of TC4 alloy by electrodeposited SiO2 coating
[J]. Corrosion Communications, 2021, 3: 34-44.


[9]周璇, 肖华强, 赵欣鑫,等. TC4合金表面激光熔覆TiAl涂层的高温循环氧化行为
[J]. 中国有色金属学报, 2023,33(2): 400-412.

Zhou X, Xiao H Q, Zhao X X, et al. Hightemperature cyclic oxidation behavior of TiAl coating on TC4 alloy surface by laser cladding
[J]. Chinese Journal of Nonferrous Metals, 2023,33(2): 400-412.


[10]李玉海, 左柏强, 蔡雨升,等. 低高温双重热处理对激光选区熔化TC4钛合金断裂韧性影响
[J]. 稀有金属材料与工程, 2022, 51(5): 1864-1872.

Li Y H, Zuo B Q, Cai Y S, et al. Effect of low and high temperature dual heat treatment on fracture toughness of TC4 titanium alloy by laser selective melting
[J]. Rare Metal Materials and Engineering, 2022, 51(5): 1864-1872.


[11]何博. 钛合金表面热障涂层的制备与研究
[D]. 上海: 上海交通大学, 2008.

He B. Preparation and Study of Thermal Barrier Coating on Titanium Alloy Surface
[D]. Shanghai: Shanghai Jiao Tong University, 2008.


[12]冀晓鹃, 彭浩然, 侯伟骜. 氧化铝钛涂层的制备对TC17钛合金性能的影响研究
[J]. 热喷涂技术, 2017, 9(3): 46-50.

Ji X J, Peng H R, Hou W A. Effect of preparation of alumina titanium coating on properties of TC17 titanium alloy
[J]. Thermal Spraying Technology, 2017, 9(3): 46-50.


[13]王贺权, 张博, 袁福河. 钛合金表面等离子喷涂NiCrAl 涂层残余应力检测及模拟研究
[J]. 热加工工艺, 2018, 47(22): 147-151.

Wang H Q, Zhang B, Yuan F H. Detection and simulation of residual stress of NiCrAl coating by plasma spraying on titanium alloy surface
[J]. Hot Working Technology, 2018, 47(22): 147-151.


[14]Niu Z Q, Zhou W L, Wang C L,et al. Fretting wear mechanism of plasmasprayed CuNiIn coating on Ti6Al4V substrate under plane/plane contact
[J]. Surface & Coatings Technology, 2021, 408: 1-11.


[15]Lek J Y, Bhowmika A, Tan A W. Understanding the microstructural evolution of cold sprayed Ti6Al4Vcoatings on Ti6Al4V substrates
[J]. Applied Surface Science, 2018, 459:492-50.


[16]王会东,付和国,韩颖杰,等. 大型双曲率非等厚TC4钛合金壁板整体SPF/DB成形工艺及优化
[J]. 锻压技术,2022,47(1):75-80.

Wang H D,Fu H G,Han Y J,et al. Integral SPF/DB forming process and its optimization for TC4 titanium alloy panel with large size,dual curvature and nonuniform thickness
[J]. Forging & Stamping Technology, 2022,47(1):75-80.


[17]党鹏,顾锐,王永军,等. TC4钛合金电热拉伸变形行为有限元模拟
[J]. 锻压技术,2022,47(1):185-195.

Dang P,Gu R,Wang Y J,et al. Finite element simulation on deformation behavior in electrothermal tensile for TC4 titanium alloy
[J]. Forging & Stamping Technology, 2022,47(1):185-195.

 
服务与反馈:
文章下载】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管  中国机械总院集团北京机电研究所有限公司 中国机械工程学会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9