锻压技术

激光热处理对7CrSiMnMoV模具钢组织与性能的影响

英文标题：Influence of laser heat treatment on microstructure and properties for 7CrSiMnMoV die steel

作者：刘玉冰1 管延锦1 李玉琦1 初宏强1 林军1 许善军2 王文明2 任启华2

分类号：TG143.5; TG155.5

出版年,卷(期):页码：2023,48(11):185-195

摘要：

激光热处理是一种高效、清洁的表面强化工艺，以7CrSiMnMoV模具钢为研究对象，进行了不同工艺参数下的激光热处理工艺实验，研究了激光功率和激光扫描速度对淬硬层微观组织和性能的影响规律。结果表明：7CrSiMnMoV模具钢自表层至淬硬层和热影响层均产生了大量针状马氏体，马氏体含量及其晶粒尺寸均随层深的增加而减小。通过控制激光能量密度即可使材料获得一定深度的淬硬层，拟合得到了淬硬层深度与激光能量密度的关系式，实现了淬硬层深度的预测。通过室温摩擦磨损实验，发现淬后试样的耐磨性显著增强，且试样的耐磨性随激光能量密度的增大而提升。

Laser heat treatment is an efficient and clean surface strengthening process. For 7CrSiMnMoV die steel, laser heat treatment process experiments with different process parameters were conducted, and the influence laws of laser power and laser scanning speed on the microstructure and properties of hardened layer were studied. The results show that a large amount of acicular martensite is produced in 7CrSiMnMoV die steel from the surface layer to the hardened layer and the heat-affected layer, and the martensite content and its grain size decreases with the increasing of layer depth. By controlling the laser energy density, the material can obtain a hardened layer with a certain depth, and the relation formulas between hardened layer depth and laser energy density is obtained by fitting to realize the prediction of the hardened layer depth. Through room temperature friction and wear experiments, it is found that the wear resistance of quenched sample is significantly enhanced, and the wear resistance of sample improves with the increasing of laser energy density.

基金项目：

国家重点研发计划（2020YFB2010301）

作者简介：刘玉冰（1999-），女，硕士研究生，E-mail：202134178@mail.sdu.edu.cn；通信作者：管延锦（1969-），男，博士，教授，E-mail：guan_yanjin@sdu.edu.cn

参考文献：

[1]甄延波, 程良, 常森, 等. 激光淬火工艺及应用研究[J]. 金属加工：热加工, 2018，(12): 63-66.

Zhen Y B, Cheng L, Chang S, et al. Study and application on laser quenching process [J]. MW Metal Forming, 2018，(12): 63-66.

[2]徐洪烟, 周建忠, 袁国定, 等. 激光热处理提高材料寿命的机理[J]. 电加工与模具, 2000，(5): 28-30.

Xu H Y, Zhou J Z, Yuan G D, et al. Mechanism of laser heat treatment to improve material life[J]. Electromachining & Mould, 2000，(5): 28-30.

[3]樊湘芳, 邹湘军, 石世宏. 采用激光相变硬化工艺提高凹模寿命[J]. 模具工业, 2002，(5): 47-48.

Fan X F, Zou X J, Shi S H. Using phase transformation hardening by laser to extend the matrix life [J]. Die & Mould Industry, 2002，(5): 47-48.

[4]罗雅, 姚永成, 赵慧峰, 等. 激光淬火对调质预处理Cr12MoV钢组织及性能的影响[J]. 表面工程与再制造, 2017, 17(Z1): 23-25.

Luo Y, Yao Y C, Zhao H F, et al. Effect of laser quenching on the organization and properties of quenched pretreated Cr12MoV steel[J]. Surface Engineering & Remanufacturing, 2017, 17(Z1): 23-25.

[5]杨俊龙, 黄敏, 胡柳益, 等. 高功率激光淬火对35CrMo钢表层组织与耐磨性能的影响[J]. 机械工程材料, 2022，(2): 63-67.

Yang J L, Huang M, Hu L Y, et al. Effect of high-power laser quenching on microstructure and wear resistance of 35CrMo steel surface layer [J]. Materials for Mechanical Engineering, 2022，(2): 63-67.

[6]焦咏翔, 邓德伟, 孙奇, 等. 工艺参数对42CrMo钢激光淬火效果的影响[J]. 金属热处理, 2021, 46(11): 90-96.

Jiao Y X, Deng D W, Sun Q, et al. Influence of process parameter on laser quenching effect of 42CrMo steel [J]. Heat Treatment of Metals, 2021, 46(11): 90-96.

[7]Emamian A, Corbin S F, Khajepour A. The influence of combined laser parameters on in-situ formed TiC morphology during laser cladding[J]. Surface and Coatings Technology, 2011, 206(1): 124-131.

[8]Shin W S, Yoo H J, Kim J H, et al. Effect of laser heat-treatment and laser nitriding on the microstructural evolutions and wear behaviors of AISI P21 mold steel[J]. Metals, 2020, 10(11): 1487.

[9]谷臣清, 赵志宏, 王京秋, 等. Cr12MoV钢的隐晶马氏体及其强韧化[J]. 机械工程材料, 1989，(6): 21-25.

Gu C Q, Zhao Z H, Wang J Q, et al. Cryptocrystalline martensites and strengthening and toughening of the Cr12MoV steel [J]. Mechanical Engineering Materials, 1989，(6): 21-25.

[10]孟繁杰. 热处理工技术问答[M]. 山东：山东科学技术出版社, 1980.

Meng F J. Heat Treatment Worker Technology Q & A[M]. Shandong：Shandong Science and Technology Press, 1980.

[11]陈爱华, 李化龙, 李腾飞. 连续退火温度对IF钢力学性能及织构的影响[J]. 金属热处理, 2016, 41(6): 37-41.

Chen A H, Li H L, Li T F. Influence of continuous annealing temperature on mechanical properties and texture of IF steel [J]. Heat Treatment of Metals, 2016, 41(6): 37-41.

[12]Peng F, Xu Y B, Li J Y, et al. Interaction of martensite and bainite transformations and its dependence on quenching temperature in intercritical quenching and partitioning steels[J]. Materials & Design, 2019, 181: 107921.

[13]中国机械工程学会, 中国模具工业协会, 熊惟皓, 等. 中国模具工程大典:模具材料及热处理[M]. 北京：电子工业出版社, 2007.

China Mechanical Engineering Society, China Mold Industry Association, Xiong W H, et al. China Mold Engineering Dictionary: Mold Materials and Heat Treatment [M].Beijing：Electronic Industry Press, 2007.

[14]钟金杉, 鲁金忠, 罗开玉, 等. 激光冲击对AISI304不锈钢拉伸性能和摩擦磨损性能的影响[J]. 中国激光, 2013, 40(5): 67-73.

Zhong J S, Lu J Z, Luo K Y, et al. Influence of laser shock processing on tensile properties and tribological behaviors of AISI304 stainless steel[J]. Chinese Journal of Lasers, 2013, 40(5): 67-73.

[15]李一磊. 不同硬度匹配的马氏体耐热钢耐磨性能研究[D]. 包头：内蒙古科技大学, 2020.

Li Y L. Research on Wear Resistance of Martensitic Heat Resistant Steel with Different Hardness [D]. Baotou：Inner Mongolia University of Science & Technology, 2020.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】