锻压技术

模具参数对分瓣模式无铆连接工艺影响

英文标题：Influence of die parameters on clinching process with extensible dies

作者：刘营王志勇邢鲁超

单位：山东航空学院

分类号：TG306

出版年,卷(期):页码：2024,49(3):143-151

摘要：

为了研究分瓣模式无铆连接过程中模具参数对接头性能的协同影响，利用有限元分析软件Abaqus建立了Al5052铝合金的分瓣模式无铆连接过程的有限元模型，并对连接过程进行了数值模拟分析，得到了接头成形过程中材料的等效应力场、凹模运动速度等信息，分别分析了凹模深度、凹模半径和滑动模预紧力对接头几何参数的影响，最后对这3个因素对接头几何参数的协同影响进行了综合分析。结果表明，滑动模预紧力的加入改变了凹模半径和凹模深度双因素对接头互锁值的影响规律，施加一定的滑动模预紧力能够改善接头的机械互锁，提高接头的力学性能。研究得到的模具参数对接头成形的影响规律，为铝合金分瓣模式无铆连接工艺的研究应用奠定了基础。

In order to study the synergistic effect of die parameters on joint performance during the clinching process with extensible dies, a finite element model of clinching process with extensible dies for Al5052 aluminum alloy was established by finite element software Abaqus, and the connection process was numerically simulated and analyzed to obtain the information of equivalent stress field, movement speed of sliding die and so on during the joint forming process. Then, the influences of die depth, die radius and preload of sliding die on the geometric parameters of joint were studied. Finally, the synergistic influence of these three factors on the geometric parameters of joint was comprehensively analyzed. The results show that the addition of the preload of sliding die changes the original influence of die radius and die depth on the interlock value of joint, and applying a certain preload of sliding die can improve the mechanical interlock of joint and the mechanical properties of joint. Thus, the influence of die parameters on the joint forming lays a foundation for the research and application of the clinching process with extensible dies for aluminum alloy.

基金项目：

山东省自然科学基金资助项目（ZR2020KE051,ZR-2021QE204）；山东省重点研发计划项目（2019GGX105004）；滨州学院科研基金(BZXYLG2015)；滨州学院双服务项目(BZXYSFW-201912)

作者简介：刘营 (2000-)，女，硕士研究生，E-mail：1806701706@qq.com；通信作者：王志勇（1985-），男，硕士，讲师，E-mail：wzhy8510@126.com

参考文献：

[1]范子杰, 桂良进,苏瑞意. 汽车轻量化技术的研究与进展[J]. 汽车安全与节能学报, 2014, (1): 1-16.

Fan Z J,Gui L J,Su R Y. Research and development of automotive lightweight technology [J]. Journal of Automotive Safety and Energy, 2014, (1): 1-16.

[2]李红, 刘旭升, 张宜生. 新能源电动汽车异种材料连接技术的挑战、趋势和进展[J]. 材料导报, 2019, 33(23): 3853-3861,3881.

Li H,Liu X S,Zhang Y S. Current research and challenges in innovative technology of joining dissimilar materials for electric vehicles [J]. Materials Reports, 2019, 33(23): 3853-3861,3881.

[3]李永兵, 马运五, 楼铭, 等. 轻量化薄壁结构点连接技术研究进展[J]. 机械工程学报, 2020, 56(6): 125-146.

Li Y B,Ma Y W,Lou M, et al. Advances in spot joining technologies of lightweight thin-walled structures [J]. Journal of Mechanical Engineering, 2020, 56(6): 125-146.

[4]Rosenthal S, Maa F, Kamaliev M, et al. Lightweight in automotive components by forming technology[J]. Automotive Innovation, 2020,3(3): 195-209.

[5]Buffa G, Fratini L, La Commare U, et al. Joining by forming technologies: Current solutions and future trends[J]. International Journal of Material Forming, 2022, 15(3): 27-16.

[6]Wu J L, Chen C, Ouyang Y W, et al. Recent development of the novel riveting processes[J]. The International Journal of Advanced Manufacturing Technology, 2021, 117(2):19-47.

[7]王志勇, 韩善灵, 卢翔. 汽车车身轻量化材料无铆冲压连接技术的研究进展[J]. 热加工工艺, 2019, 48(17): 5-10,4.

Wang Z Y,Han S L,Lu X. Research progress of clinching technology for lightweight automobile body materials [J]. Hot Working Technology, 2019, 48(17): 5-10,4.

[8]李奇涵, 徐传伟, 高嵩, 等. 异质薄板无铆连接数值模拟及工艺参数影响规律[J]. 塑性工程学报, 2021, 28(10): 113-121.

Li Q H, Xu C W, Gao S, et al. Numerical simulation of clinching for dissimilar thin-sheets and influence law of process parameters [J]. Journal of Plasticity Engineering, 2021, 28(10): 113-121.

[9]冯玉涛,胡志强,刘铁,等. 无铆钉铆接技术原理及优劣势分析 [J]. 锻压技术, 2023, 48 (8): 169-175.

Feng Y T, Hu Z Q, Liu T, et al. Principle of clinching technology and advantages and disadvantages analysis [J]. Forging & Stamping Technology, 2023, 48 (8): 169-175.

[10]Peng H, Chen C, Zhang H Y, et al. Recent development of improved clinching process[J]. The International Journal of Advanced Manufacturing Technology, 2020, 110(11-12): 3169-3199.

[11]Ren X Q, Chen C, Peng H, et al. Investigation on mechanical behavior of clinched joints produced with dissimilar dies[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2023, 237(1-2): 31-42.

[12]Han X L, Zhao S D, Liu C, et al. Optimization of geometrical design of clinching tools in clinching process with extensible dies[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(21): 3889-3897.

[13]Lambiase F, Di Ilio A. Finite element analysis of material flow in mechanical clinching with extensible dies[J]. Journal of Materials Engineering and Performance, 2013, 22(6): 1629-1636.

[14]Qin D L, Chen C, Ouyang Y W, et al. Finite element methods used in clinching process[J]. The International Journal of Advanced Manufacturing Technology, 2021, 116(9-10): 2737-2776.

服务与反馈：

【文章下载】【加入收藏】