网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
四辊卷板机弯卷成形工艺的研究进展
英文标题:Research progress on roll-bending process of four-roll plate rolling machines
作者:马晨波 张子恒 张玉言 孙见君 李想 
单位:南京林业大学 机械电子工程学院 江苏 南京 210037 
关键词:四辊卷板机 弯卷成形 连续滚弯 数学模型 工艺流程 
分类号:TG335
出版年,卷(期):页码:2024,49(5):1-12
摘要:


?四辊卷板机弯卷成形工艺可将板材加工为弧形件、筒形件、锥形件以及多边形件等定或变曲率件,该工艺以其高效、灵活、省材和成形精度高等优点而被广泛应用。从工艺方法与流程、工艺过程理论模型及建模影响因素3个方面综述了四辊卷板机弯卷成形工艺。介绍了弯卷成形中非对称式弯卷方法与对称式弯卷方法的工作原理、工艺流程及特点;针对工艺流程中的连续滚弯过程,总结了3类线性滚弯数学模型和非线性滚弯数学模型的特征、适用性和精度等;分析了影响工艺过程建模的材料硬化特性、弯卷道次数和板材卸载回弹3方面因素。最后,探讨了当前研究存在的问题和未来可能的发展方向。

 

 The roll-bending process of four-roll plate rolling machines can process the plate into fixed or variable curvature parts such as curved parts, cylindrical parts, conical parts and polygonal parts. This process is widely applied due to its advantages of high efficiency, flexibility, material saving and high forming accuracy. Therefore, the roll-bending process of four-roll plate rolling machines was reviewed from three perspectives: process methods and flow, theoretical models of the process, and influencing factors of establishing the model. Firstly, the working principles, process flows and characteristics of asymmetric and symmetric roll-bending process were introduced. Secondly, for the continuous roll-bending process in the process flow, the characteristics, applicability and accuracy of three types of linear and nonlinear roll-bending mathematical models were summarized. Furthermore, the three factors affecting the modeling of the process were analyzed, including the material hardening characteristics, the roll-bending passes and the unloading springback of plate. Finally, the current research issues and possible future development directions were discussed. 

 
基金项目:
江苏省重点研发计划项目(SBE2021030576)
作者简介:
作者简介:马晨波(1983-),男,博士,教授 E-mail:machenbo@njfu.edu.cn 通信作者:张子恒(2000-),男,硕士研究生 E-mail:zhangziheng@njfu.edu.cn
参考文献:

 
[1]仉志强, 宋建丽, 付建华,等. 板材弯卷成形工艺的研究现状
[J]. 塑性工程学报, 2014, 21(1): 1-6,84. 


 

Zhang Z Q, Song J L, Fu J H, et al. Research status of plate bending and roll-bending process
[J]. Journal of Plasticity Engineering, 2014, 21(1): 1-6,84.

 


[2]Shinkin N V. Asymmetric three-roller sheet-bending systems in steel-pipe production
[J]. Steel in Translation, 2017, 47(4): 235-240. 

 


[3]李永堂, 梁涛, 雷步芳,等. 我国大型卷板机研究现状和发展趋势
[J]. 锻压装备与制造技术, 2020, 55(5): 15-19. 

 

Li Y T, Liang T, Lei B F, et al. Research status and developing trend of large plate bending machine
[J]. China Metalforming Equipment & Manufacturing Technology, 2020, 55(5): 15-19. 

 


[4]黄春峰. 圆锥筒形零件的压力加工成形
[J]. 航空制造技术, 2003,(4): 92-93. 

 

Huang C F. Pressure forming of conical part
[J]. Aeronautical Manufacturing Technology, 2003,(4): 92-93. 

 


[5]何雪婷, 王玉华, 朱富慧,等. 板材弯卷成形技术的研究进展
[J]. 模具技术, 2017,(6): 55-60. 

 

He X T, Wang Y H, Zhu F H, et al. Research progress of plate roll-bending processes
[J]. Die and Mould Technology, 2017,(6): 55-60. 

 


[6]Hadic' N, Keran Z, Hadjina M, et al. Analysis of elastic-plastic steel plates forming based on typical shipyard′s roller bending machine
[J]. Ocean Engineering, 2019, 190: 106438.

 


[7]邢伟荣. 卷板机的现状与发展
[J]. 锻压装备与制造技术, 2010, 45(2): 10-16. 

 

Xing W R. Status and development of the bending machine for plate
[J]. China Metalforming Equipment & Manufacturing Technology, 2010, 45(2): 10-16. 

 


[8]Zhang Z Q, Song J L, Fu J H, et al. A refined model of three-roller elastoplastic asymmetrical pre-bending of plate
[J]. Journal of Iron and Steel Research:International, 2014, 21(3): 328-334.

 


[9]Cai Z Y, Lan Y W. Analysis on the straight-end problem in thin-plate three-roll bending
[J]. Applied Mechanics & Materials, 2011, 80-81: 585-590. 

 


[10]Hua M, Sansome D H, Rao K P, et al. Continuous four-roll plate bending process: Its bending mechanism and influential parameters
[J]. Journal of Materials Processing Technology, 1994, 45(1-4): 181-186. 

 


[11]Hua M, Baines K, Cole I. Bending mechanisms, experimental techniques and preliminary tests for the continuous four-roll plate bending process
[J]. Journal of Materials Processing Technology, 1995, 48(1-4): 159-172.

 


[12]肖善超, 姚久军, 沙心勇. 四辊卷板机侧辊位移计算模型研究
[J]. 一重技术, 2017,(4): 48-51,72. 

 

Xiao S C, Yao J J, Sha X Y. Mathematical model for side roller displacement calculation of 4-roller plate benders
[J]. CFHI Technology, 2017,(4): 48-51,72. 

 


[13]李建, 陈举庆, 姚久军. 四辊卷板机弯卷工艺及辊位移计算模型
[J]. 一重技术, 2015,(3): 1-5,44. 

 

Li J, Chen J Q, Yao J J. Modeling and computation of the four-roller bending process and roller displacement
[J]. CFHI Technology,2015,(3): 1-5,44. 

 


[14]周迟. 四辊卷板成形工艺技术研究
[D]. 南京: 南京理工大学, 2018. 

 

Zhou C. Research on Four-roll Plate Bending and Forming Technology
[D]. Nanjing: Nanjing University of Science and Technology, 2018. 

 


[15]陈德道, 杨晋, 安虎平. 四辊卷板机侧辊工艺位移计算模型的研究
[J]. 锻压装备与制造技术, 2015, 50 (3): 44-48. 

 

Chen D D, Yang J, An H P. Study on calculation model of process displacement for side rollers in four-roll plate bending machine
[J]. China Metalforming Equipment & Manufacturing Technology, 2015, 50 (3): 44-48. 

 


[16]Hua M. The Mechanics of Continuous Roller Bending of Plates
[D]. Birmingham: University of Aston, 1986.

 


[17]Leacock G A, McCracken D, Brown D, et al. Numerical simulation of the four roll bending process
[J]. Materials and Manufacturing Processes, 2012, 27(4): 370-376. 

 


[18]赵军, 徐常富. 对称式四辊卷圆工艺方法及装置
[P]. 中国:CN104324988B, 2016. 

 

Zhao J, Xu C F. Symmetrical four-roll circular rolling process method and device
[P]. China: CN104324988B, 2016. 

 


[19]Cao H Q, Yu G C, Yang C F, et al. Research on a control strategy of the symmetrical four-roller bending process based on experiment and numerical simulation
[J]. Symmetry, 2021, 13(6): 940.

 


[20]Yu G C, Zhao J, Xu C F. Development of a symmetrical four-roller bending process
[J]. The International Journal of Advanced Manufacturing Technology, 2019, 104(9-12): 4049-4061.

 


[21]Hua M, Cole I M, Baines K, et al. A formulation for determining the single-pass mechanics of the continuous four-roll thin plate bending process
[J]. Journal of Materials Processing Technology, 1997, 67(1): 189-194.

 


[22]Hua M, Sansome D H, Baines K. Mathematical modeling of the internal bending moment at the top roll contact in multi-pass four-roll thin-plate bending
[J]. Journal of Materials Processing Technology, 1995, 52(2): 425-459. 

 


[23]苏传德. 卷板机电机驱动功率的计算
[J]. 山东冶金, 1999, (3): 44-45. 

 

Su C D. Calculation of motor driven power of coiling plate machine
[J]. Shandong Metallurgy, 1999, (3): 44-45. 

 


[24]Salem J, Champliaud H, Feng Z, et al. Experimental analysis of an asymmetrical three-roll bending process
[J]. The International Journal of Advanced Manufacturing Technology, 2016, 83(9-12): 1823-1833.

 


[25]徐兆军. 四辊卷板机卷制圆筒控制数学模型
[J]. 制造业自动化, 2013, 35(12): 62-64. 

 

Xu Z J. The mathematical model of cylinder bending control of four-roller bending machine
[J]. Manufacturing Automation, 2013, 35(12): 62-64.

 


[26]王艳, 胡捷飞, 许光辉,等. 四辊预弯与连续滚弯成形的机理与试验分析
[J]. 塑性工程学报, 2016, 23(4): 69-75. 

 

Wang Y, Hu J F, Xu G H, et al. Theoretical and experimental analysis of four-roll pre-bending and continuous bending
[J]. Journal of Plasticity Engineering, 2016, 23(4): 69-75.

 


[27]于兴亚. 非对称式三辊卷板机最小弯卷半径的计算
[J]. 锻压装备与制造技术, 1978, (6): 9-10. 

 

Yu X Y. Calculation of minimum bending radius of asymmetrical three roll bender
[J]. China Metalforming Equipment & Manufacturing Technology, 1978, (6): 9-10.

 


[28]龚发云, 王训响. 非对称式三辊弯板机卷板数学模型的研究
[J]. 湖北工业大学学报, 2005,(3): 13-15. 

 

Gong F Y, Wang X X. Research about mathematical model of asymmetrical three roll bender
[J]. Journal of Hubei University of Technology, 2005,(3): 13-15.

 


[29]王艳, 朱新庆, 胡捷飞,等. 四辊卷板机连续滚弯成形工艺的数值模拟研究
[J]. 系统仿真学报, 2018, 30(5): 1772-1780. 

 

Wang Y, Zhu X Q, Hu J F, et al. Research on numerical simulation of continuous roll forming process of four-roll plate bending machines
[J]. Journal of System Simulation, 2018, 30(5): 1772-1780. 

 


[30]汪兴. 四辊卷板机滚弯成形工艺研究及软件开发
[D]. 武汉: 华中科技大学, 2020. 

 

Wang X. Research on Roll Forming Process and Software Development of Four-roll Bending Machine
[D]. Wuhan: Huazhong University of Science and Technology, 2020. 

 


[31]Lin Y H, Hua M. Influence of strain hardening on continuous plate roll-bending process
[J]. International Journal of Non-Liner Mechanics, 2000, 35(5): 883-896.

 


[32]Hua M, Baines K, Cole I M. Continuous four-roll plate bending: A production process for the manufacture of single seamed tubes of large and medium diameters
[J]. International Journal of Machine Tools & Manufacture, 1999,(39): 905-935.

 


[33]周晗琼. 大型四辊卷板机卷制工艺关键技术研究
[D]. 南京: 南京理工大学, 2019. 

 

Zhou H Q. Research on the Key Technologies of the Bending Process of Large Four-roller Plate Bending Machines
[D]. Nanjing: Nanjing University of Science and Technology, 2019.

 


[34]Hua M, Lin Y H. Effect of strain hardening on the continuous four-roll plate edge bending process
[J]. Journal of Materials Processing Technology, 1999, 90: 12-18.

 


[35]林逸汉, 李凡, 张迪. 四辊轮多次弯板成形过程的刚性夹持模型
[J]. 复旦学报:自然科学版, 2002,(5): 495-500.

 

Lin Y H, Li F, Zhang D. Rigid pinch-type modeling of the multi-pass four-roll plate bending process
[J]. Journal of Fudan University:Natural Science, 2002,(5): 495-500.

 


[36]郝瑞霞, 付文智, 李明哲. 多道次多点成形过程的数值模拟研究
[J]. 塑性工程学报, 2006,13(1): 18-21. 

 

Hao R X, Fu W Z, Li M Z. The study on numerical simulation of multi-steps of multi-point forming
[J]. Journal of Plasticity Engineering, 2006,13(1): 18-21. 

 


[37]周迟, 孙宇, 武凯,等. 四辊卷板多道次滚弯成形建模与工艺参数分析
[J]. 塑性工程学报, 2018, 25(3): 35-41. 

 

Zhou C, Sun Y, Wu K, et al. Modeling and analysis of process parameters in multi-pass four-roll bending
[J]. Journal of Plasticity Engineering, 2018, 25(3): 35-41.

 


[38]王玉华, 邓景煜, 何雪婷,等. Invar 36合金厚板四辊滚弯成形及回弹规律研究
[J]. 塑性工程学报, 2018, 25(4): 59-64. 

 

Wang Y H, Deng J Y, He X T,et al. Study on four-roller roll-bending forming and springback of thick Invar 36 alloy plate
[J]. Journal of Plasticity Engineering, 2018, 25(4): 59-64. 

 


[39]李建, 赵军, 展培培,等. 板料自由弯曲成形及回弹理论解析
[J]. 塑性工程学报, 2009, 16(4): 1-6. 

 

Li J, Zhao J, Zhan P P, et al. Theoretic analysis of forming and springback for sheet metal air bending
[J]. Journal of Plasticity Engineering, 2009, 16(4): 1-6.

 


[40]高桂艳, 于高潮, 赵军,等. 四辊卷圆成形及其弹复解析
[J]. 塑性工程学报, 2017, 24(1): 55-62. 

 

Gao G Y, Yu G C, Zhao J, et al. Rolling round process of four-roll and its springback analysis
[J]. Journal of Plasticity Engineering, 2017, 24(1): 55-62.

 
服务与反馈:
文章下载】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管  中国机械总院集团北京机电研究所有限公司 中国机械工程学会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9