|
Abstract：
|
|
Forging quality and technical economic benefit of plastic working industries strongly depend on preform sequence and preform design.Because of the complexity of problem,the preform sequence and preform are usually determined through trial and error method based on practical experience and intuition.Obviously,the above situation could not meet the needs of development of high tech dominated by information technique.In present paper,a new preform design method based on FEM numerical simulation and optimization was presented,and several know how that must be solved during the implementation of the new method were investigated.The preform for FGH95 turbine disk forging was designed by using the preform optimization prototype system developed by the authors,the obtained results were satisfied.
|
|
Funds：
|
|
国家自然科学基金!(批准号 598750 71 )资助项目
|
|
AuthorIntro：
|
|
|
|
Reference：
|
1 Sun Sheng,Guan Tingdong.The Reverse Simulation Technique ofDie Forging Based on U BET and its Application,J.Mech.Engrg.1 991 ,4 ( 3 ) :1 77～ 1 83
2 S Kobayashi.Approximate Solutions for Preform Design in ShellNosing.Int.J.MTDR,1 983 ,2 3 :71～ 82
3 C S Han,R V Grandhi,R Srinivasan.Optimium Design of ForgingDie Shapes Using Nonlinear Finite Element Analysis.J.AIAA,1 993 ,3 1 ( 4) :774～ 781
4 Guoqun Zhao,E Wright,R V Grandhi.Forging Preform Designwith Shape Complexity Control in Simulating BackwardDeformation. Int.J.mach.Tools Manufact,1 995,3 5( 9) :1 2 2 5～1 2 3 9
5 G Zhao ,E Wright,R V Grandhi.Computer Aided Preform Designin Forging Using the Inverse Die Contact Tracking Method.Int.J.Mach.Tools Manufact,1 996,3 6( 7) :755～ 769
6 S Badrinarayanan,N Zabaras.A Sensitivity Analysis forthe Designof Metal Forming Processes.Comput.Methods Appl.Mech.Engrg,1 996,1 2 9:3 1 9～ 3 4 8
7 L Fourment,J L Chenot.Optimal Design for Non-Steady-StateMetal Forming Processes-I.Shape Optim ization Method.Int.J.Numer.Methods.Eng,1 996,3 9:3 3～ 65
8 万耀宇 ,梁庚荣 ,陈志强 .最优化计算方法 .北京 :工人出版社 ,1 983 :51～ 58
9 S Kobayashi,S I Oh,T Altan. Metal Forming and the FiniteElement Method. Oxford University Press,New York,U SA,1 989:90～ 1 2 9
1 0 张麦仓 .粉末高温合金涡轮盘成形过程数值模拟 .西北工业大学博士学位论文 ,1 999
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved