|
Abstract：
|
|
With the aid of FEM software Abaqus/Explicit, the FEM model of hot continuous H-beam rolling process was built and the simulation was finished through section control technique. Based on simulation result, the flow and deformation of blank metal in the stable rolling phase were discussed. The analysis shows that metal will flow inward along the surface of H-Beam groove, deformations in web and flange is different, and deformation in conjunction of web and flange is the most complex; the edge mills mainly work on the flange edge, therefore, the universal mills should be taken as the first priority when rolling plans are made.The references were given to the rolling mill practice.
|
|
Funds：
|
|
山东省科技创新基金资助项目(2003182);;
高等学校博士点学科专项基金资助项目(20050422032)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]朱旭光,程鼎.H型钢万能轧制宽展分析[J].轧钢,2006,23(1):22-26.
[2]程眉,张治民,于建民.多向塑性成形数值模拟研究[J].锻压技术,2007,32(5):129-132.
[3]贺庆强,张勤河,刘克强,等.型钢热轧全过程有限元仿真[J].武汉理工大学学报,2006,28(10):118-122.
[4]贺庆强,张勤河,刘克强,等.型钢热轧开坯过程金属变形分析[J].塑性工程学报,2007,14(4):115-119.
[5]曹杰,奚铁,章静,等.H型钢万能轧制变形分析[J].重型机械,2005,(1):23-25.
[6]陈伟,朱国明,康永林,等.H型钢X-H三机架往复连轧过程三维有限元分析[J].塑性工程学报,2007,14(4):110-114.
[7]崔振山,刘才,卜勇力.H型钢热轧过程金属流动的数值模拟[J].塑性工程学报,1999,6(3):74-78.
[8]汪家才.金属压力加工的现代力学原理[M].北京:冶金工业出版社,1991.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved