|
Abstract：
|
|
In the hot stamping and quenching process of ultra high strength steels,the formability and the final mechanical property of the steels are directly influenced by the heat transfer condition between the blank and the die.The heat transfer of the blank in the hot stamping and quenching process was analyzed by analytical method.According to the heat transfer behavior of the steels,the whole heat transfer process was divided into three phases:transfer to air,transfer to die and the mix of air and die.The analytical model was proposed to describe the relationship between the temperature change and time in different phases and verified by experimental investigation.Results show that there is acceptable agreement between the analytical model and the experimental results,and the temperature of steel blank calculated by the proposed model can reflect the law of the steels temperature change during hot stamping process.The proposed model will provide necessary and reliable basis for the further investigation and application of the hot stamping and quenching process.
|
|
Funds：
|
|
上海汽车工业发展基金资助项目(0415)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]Suehiro M,Kusumi K,Miyakoshi T,et al.Properties ofaluminum-coated steels for hot-forming[J].Nippon SteelTechnical Report,2003,(88):295-415.
[2]Geiger M,Merklein M,Hoff C.Basic investigation on thehot stamping steel 22MnB5[A].Proceedings of the SheetMetal 2005 Conf.[C].Switzerland,2005.
[3]谭志耀,田浩彬,倪峰,等.硼钢板高温拉伸性能研究[J].理化检验:物理分册,2006,42(2):63-65.
[4]赵以贤,毕小平,刘西侠,等.基于集总参数法的车用内燃机传热计算机仿真研究[J].内燃机学报,2003,21(4):239-243.
[5]张洪济.热传导[M].北京:高等教育出版社,1992.
[6]朱德才,张立文,裴继斌,等.固体界面接触换热系数影响因素的实验研究[J].锻压技术,2008,33(1):139-142.
[7]朱巧红,鲍文华,倪锋,等.USIBOR1500超高强度板热成形模具冷却系统设计[J].机械设计,2006,(增刊):106-108.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved