|
Abstract：
|
|
During roll forming,the final shape,the microstructure and property of workpiece are depended on the roller feed route and its gesture.For the purpose of designing the roller feeding route of double-sided roll forming of disc parts with complex profile,a simplified model was set up for calculating workpiece geometric parameters in each forming step according to the principle of constant volume during plastic deformation.With this model,transition dimensions of work-piece and deformation state of disc parts in every rolling time could be analyzed and predicted,therefore,the data of the rollers feed was calculated for forming a disc part.With above data,a roll forming test for forming the disc part was carried out.The experimental results show that the rolled disc part shape is in agreement with that of the object part,which proves that the algorithm suggested here is feasible and can be used to compile software for rolling forming under numerical control.
|
|
Funds：
|
|
国家自然科学基金资助项目(50475061)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]金泉林,刘晓飞,张艳姝.盘形件辗压成形原理及其数值模拟[J].钢铁研究学报,2003,15(7):654-658.
[2]李彤,金泉林.盘型件双面辗压三维变形过程的数值模拟研究[J].锻压装备与制造技术,2006,41(2):87-90.
[3]李彤.盘型件双面辗压成形工艺研究[D].北京:机械科学研究院,2006.
[4]李彤,刘晓飞,金泉林.宽槽双面辗压实验研究[J].塑性工程学报,2007,14,(4):96-100.
[5]陈森灿.塑性理论的应用:金属压力加工工序的力学分析[D].北京:清华大学机械工程系,1982.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved