|
Abstract：
|
|
Warm and cold combined deformation is an advanced technique which has the advantages of high efficiency,high quality,low cost and saving raw materials and man-hours.The characteristics of the deformation of the complex abnormal part with complex shape and high side accuracy requirement were analyzed.The optimization design of preformed billet was made with the method of finite element simulation to overcome the common deficiency during the forming.Validated with the experiment,the effect of the supporting forging is good,the roughness of surface reaches Ra1.6～Ra3.2 and the dimensional accuracy is IT11～IT12.The metallurgical structure shows that the structure of forging is uniform and tiny without evident defects.This result can meet all requirements of the part and this technique can be broadly applied in the future.
|
|
Funds：
|
|
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]张峥嵘,肖红生,尹平,等.温、冷精锻综合成形关键技术及其发展趋势[J].锻压装备与制造技术,2004,(5):19-22.
[2]肖红生.温锻-冷精整综合成形技术及其应用[J].机械工人,2003,(6):12-14.
[3]肖红生,林新波,张质良,等.温锻精密成形技术及其有限元模拟[J].锻压技术,2000,25(2):3-6.
[4]仇明侠,张治民,等.齿轮温挤精密成形工艺数值模拟[J].锻压技术,2005,30(3):53-55.
[5]伍太宾,唐全波,等.冷/温复合成形技术及其工业应用三例[J].热加工工艺,2006,35(17):83-85.
[6]李霞,张水忠.扁翼类零件挤压成形数值模拟及缺陷预测[J].锻压技术,2005,30(2):15-17.
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved