|
Abstract：
|
|
Different numerical simulation methods on tailor-welded blanks(TWBs)forming process were introduced in detail The deep drawing of tailor-welded boxes with non-uniform thickness was simulated by ABAQUS/Explieit code and the influence of the weld properties and shape on the results of numerical simulation was researched.There were three weld treatment methods in finite element model of TWBs as follows:the weld was neglected,the shell element was usded for weld,and the solid dement was used for weld and the weld shape was simplified as trapezoid.All of the parent materials in three models were shell element.Comparing the material flow and the displacement of weld in three models and in experiments,the weld properties have little influence on the simulation results,while the weld shape has large influence on the simulation results.The model of TWBs considering the weld shape is consistent with the experi- ment results.
|
|
Funds：
|
|
国家自然科学基金(50475125)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]Ghoo B Y,Keum Y T,Zim Y S.Evaluation of the mechani- cal properties of welded metal in tailored steel sheet welded by CO2 laser[J].Journal of Materials Processing Technology, 2001,113(1-3):692-598.
[2]陈炜，杨继昌，林忠钦．拼焊板在车身覆盖件制造中的应用[J]．汽车工程，2003，25(1)：82-87．
[3]张福祥，陈炜，杨继昌，等．拼焊板在盒形件拉伸过程中的焊缝移动研究[J]．金属成形工艺，2002，20(5)：33-36．
[4]Ana Reis,Pedro Teixeira,Ferreira Duarte J,et al.Tailored welded blanks-an experimental and numerical study in sheet metal forming on the effect of welding[J].Computers and Structures,2004,82(17-19):1435-1442.
[5]Ghassan T Kridli,Peter A Friedman,Andrew M Sherman, Formability of aluminum tailor-welded blanks[A].SAE Technical Paper Series[C].No.2000-01-0772.Detroit: SAE,2003.
[6]Nakagawa N,Ikura S,Natsumo F.et al.Finite element sim- ulation of stamping a laser-welded blank[A].SAE Sheet Metal and Stemping Symposium[C].Detroitl:SAE,1993.
[7]Iwata N,Matsui M,Nakagawa N,et al.Improvement in fi- nite-element simulation for stamping and application to the forming of laser-welded blanks[J].Journal of Materials Pro- cessing Technology,1995,50(1):335-347.
[8]Mustafa A Ahmetoglu,Dirk Drouwers,Leonid Shulkin,et al.Deep drawing of round cups from tailor-welded blanks [J].Journal of Materials Processing Technology,1995,53 (3-4):684-694.
[9]Sushanta Kumar Panda,Ravi Kumar D,Hafish Kumar,et al.Characterization of tensile properties of tailor welded IF- steel sheets and their formability in stretch forming[J]. Journal of Materials Processing Technology,2007,184(1- 3):288-293.
[10]Meinders T,Van den Berg A,Huetink J.Deep-drawing aim- ulation of tailored blanks and experimental verification[J]. Journal of Material Processing Technology,2000(103): 235-246.
[11]吕盾，陈炜，郭伟刚，等．随行程变化变压边力拼焊板盒形件成形性能研究[J]．锻压技术，2006，31(4)：129-131．
[12]杨继昌，陈炜，张福祥，等．差厚拼焊板拉延成形工艺研究[J]．江苏大学学报(自然科学版)，2003，24(5)：1-4．
[13]陈锡荣，林忠钦，李淑慧，等．基于数值模拟的拼焊板焊缝移动控制方法研究[J]．汽车技术，2004(2)：30-32．
[14]张士宏，许沂，马占国，等．拼焊板方盒件拉伸非均匀变形的计算机模拟研究[J]．塑性工程学报，2001，8(2)：49- 51．
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved