Transactions of Materials and Heat Treatment

Title：Numerical simulation of forging and deep extrusion compound process for axle shaft tube

Authors： YU Guang-zhong JIANG Peng HU Fu-rong CAO Fei FU Dian-yu(Beijing Research Institute of Mechanical & Electrical Technology Beijing 100083 China)

Unit：

KeyWords： forging deep extrusion axle shaft tube numerical simulation

ClassificationCode：TG316

year,vol(issue):pagenumber：2007,32(2):102-104

Abstract：

The forging and deep extrusion compound process for axle shaft tube was introduced,and the process was applied to the high-energy screw press and hydraulic press respectively.The 3D FEM analysis for this process was taken by using the Deform-3D.The simulation result indicates that the process is reasonable and the axle shaft tube can be formed perfectly.

Funds：

Reference：

[1]夏华,胡亚民,雷登峰.关于国内外半轴套管的精密成形[J].机械工人(热加工),2005,(3):69-72.
[2]刘锦盛,夏巨谌,胡国安.半轴套管精密模锻过程分析与研究[J].石油机械,1998,(5):7-10.
[3]温志高,熊运昌,彭晓南.汽车轮毂管复合挤压工艺的研究[J].锻压技术,2005,30(6):4-6.
[4]韩英淳,王学明,唐志强,等.CA1040轻型车后桥半轴套管正挤与横轧工艺研究[J].中国机械工程,1998,4(8):71-72.
[5]蒋鹏,方刚,胡福荣,等.汽车前轴精密辊锻成形的数值模拟[J].机械工程学报,2005,41(6):123-127.
[6]曹飞,蒋鹏,崔红娟,等.曲轴锻造成形工艺的有限元模拟[J].锻压技术,2005,30(增刊):68-71.
[7]Jiang Peng,Cao Fei,Hu Fu-rong,et al,Three-DimensionalNumerical Simulation of Near Net Shape Roll Forging of LongNonsymmetrically Profiled Axel Workpiece[J].Journal ofthe Chinese Society of Mechanical Engineers(Taiwan),2005,26(4-5):507-512.
[8]蒋鹏,方刚,曹世金,等.奔驰重卡转向节挤压锻造复合工艺的有限元分析[J].锻压技术,2006,31(1):22-27.

Service：

【This site has not yet opened Download Service】【Add Favorite】