Transactions of Materials and Heat Treatment

Title：Analysis of springback factors for U-bending hot-rolled metal sheet parts

Authors： JING San-hui CUI Ling-jiang XIAO Xiang-rong(School of material Science and Engineering Harbin Institute of Technology(Weihai) Weihai Shandong 264209 China)

Unit：

KeyWords： springback orthogonal experiment FEM

ClassificationCode：TG386

year,vol(issue):pagenumber：2006,31(5):127-129

Abstract：

In this paper,32 groups of simulating experiments were carried out for U-bending parts according to selected orthogonal experiment table,using the special FEM(finite element method) software Dynaform.There were 9 variables in these experiments,including sheet metal thickness t,die clearance z,binder force F,radius of lower die R_d,radius of upper die r_p and material parameters K,n,r,which mainly affect the material properties.Finally,the 9 parameters were ordered according to their contribution to the springback, so that more effective measures can be taken out to control the springback of U-bending hot-rolled metal sheet parts.

Funds：

Reference：

[1]刘斌,王敏杰.V形件弯曲及回弹影响因素的研究[J].锻压技术,2002,(5):27 30.
[2]赵叶锋,等.U形件弯曲成形中回弹的数值模拟研究[J].拖拉机与农用运输车,2005,(2):42 44.
[3]张开坚,等.汽车大梁用热轧钢板的开发[J].钢铁钒钛,2000,21(3):44 47.
[4]王万中.试验的设计与分析[M].高等教育出版社,2004.
[5]Maker B N.Input parameters for metal forming simulation u-sing LS-DYNA[M].Livermore Software Technology Cor-poration,2000.

Service：

【This site has not yet opened Download Service】【Add Favorite】