|
Abstract：
|
|
In the paper, by rigid-plasticity finite element software Deform-3D, the hot forging process of the crankshaft is analyzed under different technologic conditions. The results indicate that the pivotal data obtained by the finite element simulation has a good agreement with the practical productions and can be supplied to the practical production. The time of die trial and the costs of production can be reduced to a great extent and the production efficiency can be improved.
|
|
Funds：
|
|
江西省材料科学与工程研究中心基金资助项目(ZX200401002)
|
|
AuthorIntro：
|
|
|
|
Reference：
|
[1]彭颖红·金属塑性成形仿真技术[M]·上海:上海交通大学,1999·
[2]李尚健·锻造工艺及模具设计资料[M]·北京:机械工业出版社,1991·
[3]姚泽坤·锻造工艺学与模具设计[M]·西安:西北工业大学出版社,1998·
[4]吕丽萍·有限元方法及其在锻压工程中的应用[M]·西北工业大学出版社,1989·
[5]Li G,Jinn J T,Wu WT,et al·Recent development and appli-cations of three-di mensional finite element modeling in bulk forming processes[J]·Journal of Materials Processing Tech-nology,2001,113(13):4045·
[6]Wu C Y,Hsu Y C.Opti mal shape design of an extrusion die using polynomial network and genetic algorithm[J]·The International Journal of Advanced Manufactaring Technology,2002,(2):7987·
|
|
Service：
|
|
【This site has not yet opened Download Service】【Add
Favorite】
|
|
|
|
Copyright Forging & Stamping Technology.All rights reserved