Transactions of Materials and Heat Treatment

Title：Stamping-stiffness coupling simulation techniques

Authors： XU Wei-li~(1) AI Jian~(1) YU Ning-feng~(1) WU Hua~(2)(1.R&D Center Shanghai Baosteel Group Corporation Shanghai 201900 China 2.Baosteel-Nsc/ArcelorAutomotive Steel Sheets Co. Ltd Shanghai Baosteel Group Corporation Shanghai 201900 China)

Unit：

KeyWords： stamping springback stiffness

ClassificationCode：TG386

year,vol(issue):pagenumber：2006,31(1):6-8

Abstract：

In this paper,stamping-stiffness coupling simulation techniques are proposed,i.e.,stamping,springback and stiffness is simulated with dynamic-explicit FE method,static-implicit FE code, and dynamic-explicit FE method continually.The implement process of three steps and some relative key technical points are listed.The stiffness for a double-curvature box type parts is analyzed by this method.The simulation result is compared with experimental one and satisfied result is obtained.

Funds：

Reference：

[1]Decello J A,George R A.Design criteria for dent resistanceof auto body panels[DB].SAE Technical Paper 740081,1994.
[2]Yutori Y,Nomura S,Kokubo I,et al.Studies on static dentresistance[C].Proc.of 11thInternational Deep Draw Re-search Group(IDDRG),1980,561 569.
[3]Shi M F,Brindza J A,Michel P F,et al.Static and dynamicdent resistance performance of automotive steel body panels[DB].SAE technical paper 970158,1997.
[4]Shi M F,Wilczyski J S.Potential weight savings versus dentresistance performance of high strength steel body panel[C].International body Engineering Conference’93,1993,37 43.
[5]Raghavan K S,Arwashan N.Analysis of quasi-static dentingbehavior of automotive sheet steels[DB].SAE technical pa-per,970158,1997.
[6]Dicostanzo G P,Matlock D K,Foley R P.Effect of tensileproperties on dent resistance of sheet steels[DB].SAEtechnical paper 960024,1996.
[7]Asnafi N.On strength,stiffness and dent resistance of carbody panels[J].Journal of Materials Processing Technolo-gy,1995,49(1 2):13 31.
[8]Kudo M,Kodama A,Nagamitsu T,Namba T.Relationshipbetween surface stiffness and distortion originated with plasticstrain around handle opening[C].Proc.of Working GroupMetting of the International Deep Research Group,IDDRG,Working Group 1,Toronto,Canada,1988,22 24.
[9]Ekstrand G,Asnafi N.On testing of the stiffness and thedent resistance of autobody panels.Materials and design,1998,19:145 156.
[10]Alaniz C L,Brookes L E,Seel T N.Investigate of body pan-el stiffness as predicted by finite element analysis[DB].SAE technical paper,900716,1990.

Service：

【This site has not yet opened Download Service】【Add Favorite】